[Unlogic]

I'm proud to announce that the billet aluminum TC breathers are available from me again and I'll shortly be contacting all the people who have placed preorders.

I ran into some unforeseen health issues last year which prevented me from manual milling billet parts at the same pace as I had done before. So I've spent the winter CNC converting my milling machine which enables me to make these parts with a bit less manual effort. Hopefully I'll soon be able to offer all the various parts I've previously made such as engine mounts, alternators mounts, IAC relocation kits etc.

Here are the first 3 TC breathers from my initial test batch, fresh out of the parts cleaner. The final pieces will have a slightly better surface finish.

The price is now reduced to 35$ plus shipping. Due to the light weight of the breathers tracked international shipping to most European countries and the US is only 12$.

Send me a message here on 3SI, on Facebook Messenger (Log in or sign up to view) or an email to unlogic@unlogic.se if you want to purchase one and I'll reply with my PayPal address.

 

[Unlogic]

I have similar billet aluminum product that I have been running on my car for 3 seasons but never publicly offered for sale before as I thought the market would be too small. However I was recently asked to make one of these so I made a small batch while I was at it.

This is the transmission breather for the 6 speed transmission.

Just as the TC breather it replaces the stock "rubber mushroom" breather and allows for better breathing via a small reservoir in the engine bay. It also makes it much simpler to top up the transmission fluid.

I've attached photos of these small breathers and the setup I run in my car with two reservoirs, one for the transmission and one for the transfer case.

The transmission breathers are made from 6082 billet aluminum just like the TC breathers and have a very tight fit so only a very small amount of RTV is required when installing them.

If anyone wants one they are 25$ + shipping.

Due to their light weight tracked international shipping to US and most European countries is only 12$.

 

[OldMadBrit]

I have similar billet aluminum product that I have been running on my car for 3 seasons but never publicly offered for sale before as I thought the market would be too small. However I was recently asked to make one of these so I made a small batch while I was at it.

This is the transmission breather for the 6 speed transmission.

View attachment 328599

View attachment 328600

View attachment 328601

View attachment 328602

View attachment 328603

View attachment 328604

Just as the TC breather it replaces the stock "rubber mushroom" breather and allows for better breathing via a small reservoir in the engine bay. It also makes it much simpler to top up the transmission fluid.

I've attached photos of these small breathers and the setup I run in my car with two reservoirs, one for the transmission and one for the transfer case.

The transmission breathers are made from 6082 billet aluminum just like the TC breathers and have a very tight fit so only a very small amount of RTV is required when installing them.

If anyone wants one they are 25$ + shipping.

Due to their light weight tracked international shipping to US and most European countries is only 12$.

Yes please. E-mail sent