Mitsubishi 3000GT & Dodge Stealth Forum banner

They're Back! Custom SS Fuel Lines / Fuel Rails / Etc....

8.5K views 20 replies 9 participants last post by  Illusiveinu  
#1 ·
THEY'RE BACK!!!!!!!!!!!
CUSTOM FUEL RAILS w/ STAINLESS TUBING
Looks like I got enough interest to bring this awesome package back to life. I'm going to start this off by having 15 sets of the fuel rails made, if there's more interest I'll source more.
For any reference please refer to my original thread

http://www.3si.org/.../oohnoo-ss-fuel-lines-fuel-rails.../


What I'm offering are Custom Stainless Steel Tubing feed lines, Custom FPR Bracket and Custom Fuel Rails. What you will also need are all the EARLS and/or XRP fittings and a feed hose from your fuel filter whether it's oem or aftermarket to the y-block. While I can source those parts for you I would have to add a 5% surcharge to it. I'll list some pricing so everyone gets an idea as there many options available. I'm sure I'm missing something here but we'll just start with this.

Please remember that the Stainless Steel Tubing is all custom made by hand and test fitted on each and every setup as fitment is critical. Each setup will take time to complete as it's not something I stock on the shelves. I figure one set per week to start till I can get the swing of things.

I did my best to keep pricing down as much as possible as prices have increase exponentially since I started making these 12 years ago. Please note prices do not include shipping to you. Also please not prices are subject to change do to the current market changes

Kit #1 - Custom Fuel Rails (Clear Anodized or Black Anodized)(Polished and then Anodized $20extra) w/steel -6an adapters - $200
Kit #2 - Custom FPR Bracket (Fuelab Only!) - $50
Kit #3 - Custom Fuel Rails, Custom SS Tubing ($100 Fully Polished), FPR Bracket (Black Anodized) - Sourcing your own Fuelab FPR and EARL fittings - $583

Option 1: All fittings from Y-Block (-6an feed adapter at y-block and -4an return (oem) - (Blue Fittings $) (Black $282)
Option 2: All fittings from Y-Block -8an feed adapter at y-block and -6an return - (Blue Fittings $) (Black $262)
Option 3: -6an E85 Safe Braided Hose to oem filter w/adapter to oem filter
Option 4: -6an E85 Safe Braided Hose to -6an Fuelab fuel filter w/adapters to oem fuel line
Option 5: -8an E85 Safe Braided Hose to -8an Fuelab fuel filter (no options for tank to filter)
Option 6: -8an E85 Safe Braided Hose to -8an Fuelab fuel filter w/ adapters to oem fuel line
Option 7: Fuelab Fuel Pressure Regulator - 51502-C-COLOR / FUELAB 515 Series Adjustable Fuel Pressure Regulator; EFI UNIVERSAL
Option 8: Fuelab Fuel Filter (10 Micron Fabric) Need to know inlet/outlet -an size
Option 9: Fuelab Fuel Filter (-6an /-6an 40 Stainless Filter) Need to know inlet/outlet -an size

What I need to know is which kits and options you want? If wanting some of the Options that do not have a price I will get them for you but will have to put a 5% surcharge on them.

Then I would need to know what kind of hose you want, Stainless or Black Woven....Think I also might just go with Kevlar Braided Teflon lined hose and be done with it. Cost a little more but you'll never have to worry about E-85 fuel or fuel vapors leaching from the hose. AND I will probably will only be fabbing one end on the hose. This is because everyone has different sets and would be routing the hose a little different. It's easy to put the end on. I'll post up some how-to video's I've found on Youtube.

Old location of fuel pressure gauge, it's now located on fuel rail as is seen in some pics.http://www.3si.org/.../oohnoo-ss-fuel-lines-fuel-rails.../


What I'm offering are Custom Stainless Steel Tubing feed lines, Custom FPR Bracket and Custom Fuel Rails. What you will also need are all the EARLS and/or XRP fittings and a feed hose from your fuel filter whether it's oem or aftermarket to the y-block. While I can source those parts for you I would have to add a 5% surcharge to it. I'll list some pricing so everyone gets an idea as there many options available. I'm sure I'm missing something here but we'll just start with this.

Please remember that the Stainless Steel Tubing is all custom made by hand and test fitted on each and every setup as fitment is critical. Each setup will take time to complete as it's not something I stock on the shelves. I figure one set per week to start till I can get the swing of things.

I did my best to keep pricing down as much as possible as prices have increase expoentially since I started making these 12 years ago. Please note prices do not include shipping to you. Also please not prices are subject to change do to the current market changes

Kit #1 - Custom Fuel Rails (Clear Anodized or Black Anodized)(Polished and then Anodized $20extra) w/steel -6an adapters - $200
Kit #2 - Custom FPR Bracket (Fuelab Only!) - $50
Kit #3 - Custom Fuel Rails, Custom SS Tubing (Fully Polished), FPR Bracket (Black Anodized) - Sourcing your own Fuelab FPR and EARL fittings - $583

Option 1: All fittings from Y-Block (-6an feed adapter at y-block and -4an return (oem) - (Blue Fittings $) (Black $282)
Option 2: All fittings from Y-Block -8an feed adapter at y-block and -6an return - (Blue Fittings $) (Black $262)
Option 3: -6an E85 Safe Braided Hose to oem filter w/adapter to oem filter
Option 4: -6an E85 Safe Braided Hose to -6an Fuelab fuel filter w/adapters to oem fuel line
Option 5: -8an E85 Safe Braided Hose to -8an Fuelab fuel filter (no options for tank to filter)
Option 6: -8an E85 Safe Braided Hose to -8an Fuelab fuel filter w/ adapters to oem fuel line
Option 7: Fuelab Fuel Pressure Regulator - 51502-C-COLOR / FUELAB 515 Series Adjustable Fuel Pressure Regulator; EFI UNIVERSAL

Option 8: Fuelab Fuel Filter (10 Micron Fabric) Need to know inlet/outlet -an size
Option 9: Fuelab Fuel Filter (-6an /-6an 40 Stainless Filter) Need to know inlet/outlet -an size

What I need to know is which kits and options you want? If wanting some of the Options that do not have a price I will get them for you but will have to put a 5% surcharge on them.

Then I would need to know what kind of hose you want, Stainless or Black Woven....Think I also might just go with Kevlar Braided Teflon lined hose and be done with it. Cost a little more but you'll never have to worry about E-85 fuel or fuel vapors leaching from the hose. AND I will probably will only be fabbing one end on the hose. This is because everyone has different sets and would be routing the hose a little different. It's easy to put the end on. I'll post up some how-to video's I've found on Youtube.

Old location of fuel pressure gauge, it's now located on fuel rail as is seen in some pics.
Image
Image
Image
Image
Image

Image

Image
 
#2 ·
Kit #1 for rails in black anodized 🙂

-sent from my Galaxy Note 9
 
Save
#3 · (Edited)
Sorry no black but I can ask my guy how much to strip and re-anodize in Black

Just got back from the anodizer. My cost for getting 4 sets done is $50 per set. So if you want them I'll go ahead and get them done as hopefully I can sell the others for $250
 
#6 ·
Ninja edit? Haha and sounds good! Did I misinterpret the kits listed? It does say with steel 6AN unless you were reiterating for emphasis/clarification. Are you accepting payments now or waiting for others to commit first? Thanks again!

-sent from my Galaxy Note 9
 
Save
#7 ·
They no longer come with steel fitting as I just cut-n-pasted from my old thread. But I do have a box full of them so it would be no problem dishing them out if needed.
If you want a set in the Black anodized I would need payment, then it'll take about a week to be done.
 
#8 ·
Understood and sweet! I will remit payment sometime later today 🙂 (3S mini meet so it might be in the evening)

-sent from my Galaxy Note 9
 
Save
#10 ·
Payment sent for Kit#1. Alan is a great salesman lol ill probably hang on to my set and admire them until the day comes to install them =). thank you!
 
  • Haha
Reactions: bboyalan
Save
#11 ·
Just recapping here for all payments sent:

Alan @bboyalan - black anodized rails - paid
Victor - clear anodized rails - paid
Ben @vr4allday - black anodized rails - paid
Tim - clear anodized rails w/ full blown kit - deposit paid
Rob @Mr E - black anodized rails w/ full blown kit - deposit paid

Thanks!
 
  • Like
Reactions: vr4allday
Save
#14 ·
Very detailed descriptions and instructions, appreciate that. Couple questions. Can I just get the SS lines? Or do they not work with the stock fuel rails and AN adaptors? Do the SS lines come with the female AN fitting on the ends or are they just prepped for them? Would option 1 or option 2 be best for a maxed out Supra pump?
 
#16 ·
The SS lines only work with my fuel rails. Best bet for your setup would be Kit #3 and you can go with Option 1 or 2, depending if you ever want to upgrade your feed line.
The pressure reference can be anywhere in the feed after the fuel filter
 
This post has been deleted
You have insufficient privileges to reply here.