Mitsubishi 3000GT & Dodge Stealth Forum banner

Status
Not open for further replies.
1361 - 1380 of 2060 Posts

·
og
Joined
·
4,293 Posts
rob, i'm in for the next batch. i need to find a good 9b exhaust housing for the rear turbo, i had hoped the one i have would work but it's not going to. i'll keep ya posted.
 

·
Breaks everything
Joined
·
9,937 Posts
When i get my 19Ts back from Rob, they are up for grabs since theres a black 99 vr4 in my future and need lots of cash quickly, dont post here, PM me.

Jason
 

·
Registered
Joined
·
11,246 Posts
Discussion Starter #1,365
Ok I am adding you to the list, if you can work it out in time then that is cool. BTW, whats wrong with the rear exhaust housing you have such that it wont work?

Rob

chansigril said:
rob, i'm in for the next batch. i need to find a good 9b exhaust housing for the rear turbo, i had hoped the one i have would work but it's not going to. i'll keep ya posted.
 

·
og
Joined
·
4,293 Posts
RobBeck said:
Ok I am adding you to the list, if you can work it out in time then that is cool. BTW, whats wrong with the rear exhaust housing you have such that it wont work?

Rob


what that doesn't show is the scrapes to the inside of the housing caused by the wheel exiting at undoubtably high velocity :D
 

·
Premium Member
Joined
·
3,921 Posts
Hmm
Sorry Rob I dont want to hijack your thread or anything and please treat that as a free bump but im just looking for some compressor housings after the conversion that maybe some of you have left without the turbine housing. If anybody have them for sale Ill take them. Let me know the price and if they are small or deep lip
Greg
 

·
Registered
Joined
·
11,246 Posts
Discussion Starter #1,369
Greg you actually need turbine housings which are cast iron and have the deep lip or the small lip (you have it reversed), most people here need the turbine housings as part of the conversion.

If you really need compressor housings (cast aluminum cool side) I bet there are some out there tho....

Rob
 

·
Premium Member
Joined
·
3,921 Posts
Yeah Rob I know I asked you about turbine housings but I do need few compressor housings as well now :) Came across few turbine housings:p
 

·
Premium Member
Joined
·
3,921 Posts
:) Great... Now I need few compressor housings guys. Anybody that has them, please PM me, since I dont want to ruin Rob's thread.
Greg
 

·
Registered
Joined
·
11,246 Posts
Discussion Starter #1,373
Update :cool:

Outstanding Cores: pachieh, cred05

List:
1) fun2drive95- On Deck #1 (Needs cores)
2) Tbone- On Deck #2 (Needs cores)
3) Sean3S- On Deck #3 (Needs cores)
4) Highboosted- On Deck #4 (Does NOT need cores)
5) JasonY- On Deck #5 (Does NOT need cores)
6) chansigril- On Deck #6 (Does NOT need cores)
7) 93 Stealth R/T- (Does NOT need cores)
8) hypersnap- (Does NOT need cores)
9) mrbrighteyes- (Needs cores)
10) TeKno- (Does NOT need cores)

fun2drive95, Tbone, Sean3S, Highboosted, JasonY, chansigril You guys are in this time and all have been notified with shipping info.

pachieh, cred05 I have alot of peeps needing cores this time so if one or both of you guys can get your cores sent back to me very soon that would help me alot. You will be refunded your core charge immediately after receipt of your good core housings. Remember I only need the turbine housings, you can keep the rest yourself and try to sell them on the board. If you would rather not mess with it you can always send em complete to me. :D


Thanks,
Rob
 

·
Breaks everything
Joined
·
9,937 Posts
Sweet, will be shipped wed. Im gonna get a larger box so they dont damage them, the one i have im kinda iffy on.

Jason
 

·
Registered
Joined
·
1,705 Posts
Hey Rob. Sorry about shipping. You are well aware of the issues I am having with starting my car and getting it running. I'll get the turbos dropped at UPS tomorrow. My apologies.
 

·
Boostin' ...well, someday
Joined
·
493 Posts
Adding myself to the list (again) :D

List:
1) fun2drive95- On Deck #1 (Needs cores)
2) Tbone- On Deck #2 (Needs cores)
3) Sean3S- On Deck #3 (Needs cores)
4) Highboosted- On Deck #4 (Does NOT need cores)
5) JasonY- On Deck #5 (Does NOT need cores)
6) chansigril- On Deck #6 (Does NOT need cores)
7) 93 Stealth R/T- (Does NOT need cores)
8) hypersnap- (Does NOT need cores)
9) mrbrighteyes- (Needs cores)
10) TeKno- (Does NOT need cores)
11) NVisible93- (Does NOT need cores) (13t's may be damaged)

Thanks,
Dallas
 

·
Registered
Joined
·
11,246 Posts
Discussion Starter #1,380 (Edited)
Just putting this up for future reference since my sig was banned..

1994 3000GT VR4 Zurich White Pearl, Charcoal Interior, 82k miles, sunroofless, 18" Chromes/Summitomo HTRZ2 245/40/ZR18
Current Mods: WRX TD04HL-19T Turbos clipped 7*/8psi actuators, Stock Short Block, Ported Heads/radius cut seats/stock valves, 1G DSM ICs (not installed yet), Spec Stage 3 clutch, Fully Ported Stock Front&Rear Headers/Turbine & Compressor Housings/DNP Precat Eliminators, ATR DP/flexes, ATR Single Shot Catback, Greddy S BOV/closed loop, EVO5-7 560cc injectors, Emanage Ultimate, Supra Fuel Pump/with direct hotwire via 10awg, AEM (Honda) AFPR/adapter, -6AN fuel setup, A-pillar Autometer Dual 52mm pod/VDO Turbo gauge and AEM WB02, EGT Probe/Fluke meter on #4 runner, EK2 Poly Mounts, J-Spec Gearing
WRX Turbo Integration Service/Kits
http://www.3si.org/forum/showthread.php?t=228909
TD04HL-19T/WRX Turbo Integration
http://www.3si.org/forum/showthread.php?t=399580
1G DSM BOV adapters CNC'd from Billet aluminum
http://www.3si.org/forum/showthread.php?t=162282
Greddy Type S BOV adapters CNC'd from Billet aluminum
http://www.3si.org/forum/showthread.php?t=190521
Intake Pressure Tester CNC'd from Billet aluminum
http://www.3si.org/forum/showthread.php?t=206269
AEM Adjustable Fuel Pressure Regulator adapters (for Honda FPRs) CNC'd from Billet T6061
http://www.3si.org/forum/showthread.php?t=215983
 
1361 - 1380 of 2060 Posts
Status
Not open for further replies.
Top