Mitsubishi 3000GT & Dodge Stealth Forum banner
201 - 220 of 257 Posts

· Premium Member
1993 Mitsubishi 3000gt Vr4 (running) 1993 Mitsubishi 3000gt Vr4 (project) 1994 sl (sold)
Joined
·
422 Posts
I’m in need of a good fuel pump relay connector with all of the spades an wires still in connector and maybe 6-8 inches of wire/play to work with. Do you have either of these left out of the two cars you have?
This is what I an in need of..
 

· 3S addict since '95
Joined
·
1,912 Posts
Discussion Starter · #207 ·
UPDATE: I want to thank everyone for your support. Over the past few months, I've shipped dozens... if not hundreds of parts to many members here. I'm very thankful for the support of this awesome community, which I've been an active part of for more than 20 years. I've strived to provide exceptional service and I hope those of you who have bought parts from me feel that's what you received. As we're headed into winter, I'm doing a soft wind-down of the part-outs for now. What that means is I've moved the parts cars out of my shop so I can work on a couple projects this winter. The parts cars are still here, but no longer on a lift or in a heated building. If you have a request, feel free to message me. If it's an easy part or something I already have pulled, I'll be happy to accommodate. Otherwise, I might ask you to hit me back in the spring. I know there's a few of you that have pending requests. I'll be sure to follow up with each of you in the next few days. Thanks again, my 3Si friends!
 

· 3S addict since '95
Joined
·
1,912 Posts
Discussion Starter · #212 ·
Sorry for the delay everyone. October was a tough month. Trying to get caught up now.

I would like the OBD1 connector with 4-6 inches of wire out of the 93 car. Shipped to 78681?
$35 shipped. Let me know if you want it.

Will you ship to nyc? How much for the steering lines?
Please send me a pic of the lines you're looking for. I have one car still on the lift, so might be able to get them for you.

I’m in need of a good fuel pump relay connector with all of the spades an wires still in connector and maybe 6-8 inches of wire/play to work with. Do you have either of these left out of the two cars you have?
This is what I an in need of..
I haven't pulled it so I know it's still there. You'll have to tell me where to find it. Couldn't quite tell from the pic. $35 shipped

Do you still have these relays? If you do can you send a pic of the condition and how much
They're actually fuses, but yes I have them. See pic below. $35 shipped for all 6

I'm looking for the charcoal or black a and b pillar plastics and the plastics for the rear quarter windows. Shipped to 44460. Thanks
I believe I still have the charcoal B-pillars, but need to verify. They're a little warped above the window. See pics below. $150 shipped for the pair. I should have the charcoal A-pillars, but need to check condition.

Any chance you have the Drivers side mirror and the front quarter panel I would need it for a 91 Stealth RT/TT
I have a heated driver's mirror that was freshly painted Symphonic Silver 12 years ago then I never ended up using it. Been sitting in a box on the shelf ever since. $75 shipped. Can get you pics if you're interested. By front quarter panel, do you mean the fender? I have a pretty good one in Pearl White. Paint is pealing a little on top. See pics below. $150 + actual shipping cost.

Looking for
Board for the hatchback area
License plate/License lights bracket
Drivers side black leather seat cover or whole seat. Haven't tried taking one apart yet.
I have the board. Will check condition and get you pics. I think the LP brackets I have are rusty, but I'll double check. Sorry, no leather seat cover.

You had posted new upper door mouldings/window scrapers for 380. Do you still have them, is that a pair of them, and for the exterior?
Yes, that price is for a pair. I have a set for you. They're the upper door trim on the outside (window scrapers). Brand new OEM, packaged carefully to avoid damage in shipping.



 

· Senior **i.e. OLD** Member
Joined
·
18,408 Posts
Zack, the fuel pump relay is located below the MAF and bubble (if still attached, it's on the passenger side front wheel well. It "should" have a rubber cover over it....

Just trying to help....

Bob.
 

· 3S addict since '95
Joined
·
1,912 Posts
Discussion Starter · #219 ·
I'm looking for the charcoal or black a and b pillar plastics and the plastics for the rear quarter windows. Shipped to 44460. Thanks
update… I have black A-pillars in near perfect condition. One broken clip on the driver’s side, but it’s all the way at the bottom. I also have charcoal a pillars, however those have quite a few broken clips. $160 shipped for the black ones, $75 for the charcoal. See pics below. As mentioned in my previous reply, I have charcoal B-pillars available for $150 shipped.

Looking for
Board for the hatchback area
License plate/License lights bracket
Drivers side black leather seat cover or whole seat. Haven't tried taking one apart yet.
I have the board, but it has some light water damage. Both hinges are good. See pics below. $75 shipped. Confirmed LP brackets are no good.
how much for the glove compartment with opening switch. also the interior dome light assembly?
Dome light $25 shipped. See pic below. Please clarify on glove compartment with opening switch.










 
201 - 220 of 257 Posts
Top