Mitsubishi 3000GT & Dodge Stealth Forum banner

1 - 20 of 34 Posts

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #1 (Edited)
I have been piece meal parting out some of the left over bits from my 92 TT project that I finally threw in the towel on about a year and a half ago. :( Grand plans, but I kept picking up other projects to work on that pushed things off.

Below is a listing of some of the items I have still sitting around that I'm hoping someone can get some use out of. I'm not in a huge rush to move any of this stuff, however reasonable offers will be considered. Please don't lowball me though as I've tried to discount everything well up front. I will make sure any item sold is shipped safely. I'd rather spend an extra few bucks and 10 minutes packing something well than you get a broken part. If it's not economical to package/ship well at a requested price I'll be straight up about that. All prices are shipped unless otherwise noted and parts marked (BN) are brand new never installed.


Big or Custom items:
2nd gen stealth front bumper (with headlight rubber seals and bucket frames) - $50 pickup
<del>2nd gen stealth rear bumper - $50 pickup </del> (sold)
<del>2nd gen glass headlights (robomodded) - $300 </del>(sold)
<del>2nd gen Stealth turn signals - $75</del> (Sold)
<del>ACPT Carbon Fiber driveshaft - $800 + shipping </del> (sold, pending payment)
<del>MAFT-Pro with fully blow-through setup - $250</del> (Sold)
Chrome ecu with tactrix (BN) - $850
Forged crank (not turned) 120k (New Clevite main, thrust bearings included if not sold) - $600
Set of Pauter rods with CP pistons .40 over (new rings, rod bearings included if not sold) - $1500
Clevite Bearings Standard Coated (BN) - $160
92 2 bolt oil pump with gaskets (BN) - $260
3SX Turbo oil line kit for TD04 (BN) - $220
FF Dynamics custom aluminum intake plenum - $300
<del>Set of 3rd gen hydaulic lash adjusters (BN) - $70 </del>(sold)
<del>ARP main studs (BN) - $70 </del>(sold)
Gates timing belt (BN)- $150
3S warehouse custom timing cam gears - $50
3SX lightweight crank pully - $50
Kiggly Racing Beehive valve springs (BN) - $450
Supertech Black nitride intake, inconel exhaust valve set (BN) - $450 (.5/1.0 over intake/exhaust)
Pampena Fuel rails with fittings (BN) - $150
Injector Dynamics 725 fuel injectors (BN) - $600
CXracing single pass front mount intercooler with all piping and couplers (BN) - $450
<del>Stainless ebay manifolds (BN) - $100</del> (Sold)
<del>Stainles ebay pre-cat eliminator pipes (BN) - $100</del> (Sold)
Stainless ebay downpipe (no flex section) - $150
<del>Skillard door sills powder coated black with "Twin Turbo" cutout (Stealth font) (BN) - $150</del> (Sold)
<del>Black aluminum defrost vents (BN) - $130 </del>(sold)
<del>Diamond plate floor matts black powdercoated (BN) - $75 </del>(sold
<del>3sx 91-94 suspension poly bushing kit (BN) - $240</del> (Sold)
<del>Solid rear subframe bushings (BN) - $125</del> (Sold)
<del>Solid front subframe bushings (BN) - $200</del> (Sold)
<del>Custom dual gauge pod center cluster - $75</del> (Sold)
Adjustable rear upper control arms (BN) - $130
AWS delete kit (BN) - $80
Carbotech AX6 front pads (BN) - $120
Carbotech 1521 rear pads (BN) - $100
Axxis Ultimate rear pads (BN) - $100


Stock TT parts (make offer, 120k miles unless noted):
9b turbos
side mount intercoolers
throttle bodies x2
cheap aluminum y-pipe
various interior removable covers from hatch area
various interior AC vents and tubing
AC evap filter (BN)
black headliner from a non-sunroof car (no shipping)
<del>passenger side window regulator in good working condition </del>(sold)
door seals and rear hatch seal
<del>inner and outer tie rod ends (BN)</del> (Sold)
1st gen rotors front and back (BN)
brake master cylinder (BN)
undamaged oil pickup tube
stock PTU and coilpack


Pictures of most items can be found in a google photos gallery here: https://photos.app.goo.gl/wPgaQzGiCyqpny7x6 I've got a few more items to get good pictures of like the crank and pistons/rods. If you'd like pictures of anything that's not already in there just let me know.

Paypal is [email protected].com, but please confirm with me in this thread or via PM before sending payment for any parts. I don't want to make anybody wait uncomfortable if I miss a paypal email notification.

:edit: Added some additional parts I dug out and got pictures of

Cheers,
 

·
Registered
Joined
·
345 Posts
Holy crap good prices, however I'm thinking of going with a Evo(I want ac in TN, and I have no way to get r12)

Sent from my XT1585 using Tapatalk
 

·
Member #538
Joined
·
1,262 Posts
I'll take:
3sx 91-94 suspension poly bushing kit (BN) - $240
Solid rear subframe bushings (BN) - $75
Solid rear diff bushings (BN) - $110

What is your paypal?
 

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #4
I'll take:
3sx 91-94 suspension poly bushing kit (BN) - $240
Solid rear subframe bushings (BN) - $75
Solid rear diff bushings (BN) - $110

What is your paypal?
Added paypal to the first post. Of all the things to forget, lol.

For the rear subframe bushings, I want to make sure I'm sending you the right ones. I think I bought a set of solid bushings for the front subframe as well and I was having trouble figuring out which one is which earlier tonight. I'll confirm tomorrow and post the specific image links up for you to view just to make sure I'm not smoking crack. They are yours, I just don't want to take payment until I am absolutely sure I know what to send.

:edit: Ok, I figured it out. Forgive me, it's been a reaaaaaaly long time since I bought all this stuff. I have a set of solid rear subframe bushings (4 pieces), and a set of solid front subframe bushings (6 pieces). I do not have a set of the solid rear diff carrier bushings. I got super confused by the fact that the rear subframe bushings are split in half and look like 8 separate bushings at a glance. You can see in the most recent pictures I added to the gallery what I mean.

I actually also typo'd the rear subframe bushings pricing in the original post, should have been 175 not 75. In the interest of transparency and because that mistake is on me I've updated the price in the original post to 125 halving the difference between what I intended and what I typed. That is still about 40% less that what I think I paid for them, and at least 30% less than the only ones I can find for sale online now. Let me know if you're still interested at that price, and again I'm very sorry for the confusion.
 

·
Registered
Joined
·
7 Posts
I am very interested in the front mount intercooler kit. Does it come with the preturbo intake pipes, and what color are the couplers? And do you have any photos? Thanks!
 

·
Registered
Joined
·
73 Posts
Hi Gene, I would love to purchase all of the items listed below;

Black aluminum defrost vents (BN) - $130
Skillard door sills powder coated black with "Twin Turbo" cutout (Stealth font) (BN) - $150
Diamond plate floor matts black powdercoated (BN) - $75

And how much for the passenger regulator? ALso, how much extra for shipping to Edmonton Alberta?

Thanks!

Eric
 

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #9
I'll get some pics, it's up in the original boxes on a shelf in my shed so give me a couple of days to get it all down. I honestly don't know if it's got preturbo pipes included in the set I bought though. I was going to run filters straight off the turbos in blow through setup so it wasn't a priority for me. I'll get pictures of everything.

I am very interested in the front mount intercooler kit. Does it come with the preturbo intake pipes, and what color are the couplers? And do you have any photos? Thanks!
Cheers,
--GC
 

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #10

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #11
The door sills are sold, sorry. For the other stuff, let me look into shipping tomorrow.

I'd take $30 for the passenger regulator if you want that as well.

Hi Gene, I would love to purchase all of the items listed below;

Black aluminum defrost vents (BN) - $130
Skillard door sills powder coated black with "Twin Turbo" cutout (Stealth font) (BN) - $150
Diamond plate floor matts black powdercoated (BN) - $75

And how much for the passenger regulator? ALso, how much extra for shipping to Edmonton Alberta?

Thanks!

Eric
Cheers,
--GC
 

·
Registered
Joined
·
7 Posts
Awesome, no worries, just let me know when you get the pictures and stuff. I have been wanting to get a FMIC kit, and yours popped up, so perfect timing!

I'll get some pics, it's up in the original boxes on a shelf in my shed so give me a couple of days to get it all down. I honestly don't know if it's got preturbo pipes included in the set I bought though. I was going to run filters straight off the turbos in blow through setup so it wasn't a priority for me. I'll get pictures of everything.

I am very interested in the front mount intercooler kit. Does it come with the preturbo intake pipes, and what color are the couplers? And do you have any photos? Thanks!
Cheers,
--GC
 

·
Registered
Joined
·
73 Posts
Damn thats too bad about the door sills. I will take the reg for $30. Postal code is T8N 1M3 and I am Paypal ready once you have a shipping price.

Thanks!

Eric
 

·
Premium Member
Joined
·
91 Posts
Need some front oem rotors asap as I am rolling on one with enough warp to cause front end shimmy with rapid deceleration. So I need a set that is in proper, not warped, gouged, uneven or other condition of concern. Need to be able to simply unbox, easily wipe away any contaminants, mount and use safely.

Please message me if ft the ones you've got are a close match to what I need.

Thanks
Peace
 

·
Money pit owner.
Joined
·
2,585 Posts
any info on the clevite bearings and oil pump in the pics?
 

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #18
Good catch, I found them after I originally posted everything and got pics but forgot to add them with pricing. I'll get the original post updated tomorrow with pricing on the oil pump and seals as well as a few other items I dug up.

any info on the clevite bearings and oil pump in the pics?
Cheers,
--GC
 

·
West Side!
Joined
·
1,199 Posts
Discussion Starter #19
Got a quick quote on shipping to you and with that I think it might cost less to get a set at Autozone honestly. Probably looking at $70 shipped for just the front two. They are brand new though, still in the plastic wrap in their boxes.

Cheers,
--GC

Need some front oem rotors asap as I am rolling on one with enough warp to cause front end shimmy with rapid deceleration. So I need a set that is in proper, not warped, gouged, uneven or other condition of concern. Need to be able to simply unbox, easily wipe away any contaminants, mount and use safely.

Please message me if ft the ones you've got are a close match to what I need.

Thanks
Peace
 
1 - 20 of 34 Posts
Top