Mitsubishi 3000GT & Dodge Stealth Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
905 Posts
Discussion Starter · #1 ·
I'm curious as to what the stock camshaft are, number wise. I know they are geared towards low end torque, but I can't remember seeing any numbers on them. Thanks in advance.
 

·
Registered
'91 Stealth RT and '93 Stealth TT; sold both in 2018
Joined
·
582 Posts
DOHC cam spec's:

IVO (BTDC) 16.0 IVC (ABDC) 55.0
EVO (BBDC 48.0 EVC (ATDC) 15.0

INt [email protected] Valve 0.370
Exh [email protected] Valve 0.332

If I'm wrong correct me on the lift numbers, I've seen a couple different numbers posted. Anyone else have input on the lift numbers??:rolleyes:
 

·
Registered
Joined
·
905 Posts
Discussion Starter · #3 ·
Thanks man... how are the headers coming?
 

·
Registered
Joined
·
905 Posts
Discussion Starter · #4 ·
AHA!

Found some good shit...


LH Inlet Camshaft MD150391
(MD175577)
MD175577
MD192011 1

1
1 9004.1-9201.3

9202.1-9205.3
9206.1-end Cam height (std):
up to 9205.3: 35.49
from 9206.1: 34.91
Journal diam.: 25.96
Lift (gross):
up to 9205.3: 0.375 inch
from 9206.1: 0.352 inch
Valve timing:
opens: 16º BTDC
closes: 55º ABDC
Duration: 251º (gross)
Duration: 208º @ 0.050"
Lobe separation angle:
108º cam
Overlap:
33º crank, 16.5º cam
Overall retardation: 1.5º











LH Exhaust Camshaft MD159598
MD192019 1
1 9004.1-9205.3
9206.1-end Cam height (std):
up to 9205.3: 35.20
from 9206.1: 34.91
Journal diam.: 25.96
Lift (gross):
up to 9205.3: 0.364 inch
from 9206.1: 0.352 inch
Valve timing:
opens: 50º BBDC
closes: 17º ATDC
Duration: 247º (gross)
Duration: 206º @ 0.050"
Lobe separation angle:
108º cam
Overlap:
33º crank, 16.5º cam
Overall retardation: 1.5º

But, then again, that's for the DOHC TT....
 
1 - 4 of 4 Posts
Top