Mitsubishi 3000GT & Dodge Stealth Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi guys, I havn't been on here in a long time, in fact I have had to start a new account to post again. Well here's the problem: I had new ball joints put on my car a few weeks ago. When I got it back, the steering was cocked to the left and it had a bit of a pull to the right. The align numbers are at factory spec. I had the car taken to a body shop and put on a frame aligner and everything is streight. They went over all the suspension components and measured them and nothing is bent... so ...my mechanic thinks the problem may be my tires, perhaps a cord has seperated or the belting is screwed up, I don't know but I don't want to buy a new set of tires and still have a problem. If anyone in the St.Louis area has a 2nd gen VR4 or properly offset wheels and tires that I could put on my car for a quick drive, I would definately appreciate it. I have a floor jack and a break bar and a tq wrench. I'm free just about anytime all week and weekend.

Thanks guys

NickW
 

·
Registered
Joined
·
429 Posts
Hope that was it!!!
 
1 - 3 of 3 Posts
Top