Search Results for ‘electrical’

i have a 94' 3kgt base and Im looking to replace one of my tail light sockets, it was coroded and broke. i wanna just replace it with a universal 1157 socket but dont know if it will work. will the universals splice in or would i need an oem one/ second hand one for it to work?

As the title states, I am looking to buy a 92' TT engine wiring harness. The less physical damage, the better. The last one I purchased was a JDM harness that lacked the rear 02 sensor plug along with a couple of other problems. Please let me know what you guys got. It would most likely need...

Hi everyone. I finished my atx to mtx swap, and it went very smoothly. There were many questions I had during the process, that if I knew I wouldn't have worried about them so much. This writeup is going to be on bypassing the neutral / safety switch (safety feature of automatic car) through the...

Writing this just in case anyone in the future has the same issue as me. 1. Introduction to the symptom and problems: My car's turn signals and hazard lights would work in my car. For a very short time, only when I first turned the car on. I could see the lights flashing on my dashboard. I did...

Last year before I installed a crate engine my lights worked perfectly and my after market radio was fine. After installing the motor, I crossed a wire on the starter and saw sparks fly- I made a correction and got the car to start! B I G smile on my face. When it was time to go home the sun...

I had to replace my battery today, as mine would not hold a charge. I discovered the issue the day before, having to jump my car as I left work, and again after making a stop on the way home. I have the correct battery, at a full charge, and it is oriented the right way, but problems arose after...

So I had been trying to diagnose why my car would have trouble starting some days. I have a brand new starter and battery, so I thought it may be a grounding issue, but apparently, you can feel the electricity when it's running if that's the case. Anyway, it starts fine after being on the...

my car has been revving when I come to a full stop or when I’m neutral from 1500rpms to 2000rpms back and forth until I start driving again. then after a 2 weeks of that it has been pretty jolty when letting my foot off the gas and check engine light would turn on then go away when I push on...

Was just given my uncles 3s to fix, and for some reason the pwr/eco switch wont work. More of an engine work guy, don’t know much about electrical fixes. Is the problem a faulty switch, or is there some other common problem I dont know about?

I am still working on my basket case vr4. i am tracking down a few parasitic drains. the eci fuse pulls 20 milliamps. is this normal? I also have a parasitic drain on the under dash fuse panel, fuse 19. it has a parasitic draw of .371 amps. when i enegize that circuit i hear something...

I acquired this car as a project. It had one of the heads off the block when I bought it from the previous owner stating low compression. After rebuilding the motor, I have just realized half of the previous owners problems have come from the fact that the car was running on an NA ecu and an NA...

I made a pretty stupid beginner mistake while working on my 95 3000gt SL, I was replacing the head gaskets, spark plugs and wires, and timing belt, water pump etc all of which is now installed and running fine. I made the rookie mistake of not disconnecting the battery when I first got to work...

Hi all, our customers car is a 93 stealth 3.0 v6 dohc non turbo and a/t. Initially the car showed up and was fixed with a throttle cable to cruise and fixing grounds. A few days later it came back and had arced itself from an incorrect battery being installed against the hood. We've since...

I’m looking to buy a engine wiring harness along with the ECU for a 1992 3000gt sl. I’m having a lot of trouble finding one. Please get back to me if you have one for sale I will gladly pay for it and the shipping

Sent my car to a shop a few months ago and they are now barely figuring out that I’m going to need a engine wiring harness with a ECU. I’m having a lot of trouble finding one I was hoping this website could help me. Thank you

I got my car and the climate control display was out but the rest of it was still functioning so i could still use the heat and AC. The other day i pulled the Display out to fix the blown resistor I thought it to be. i was right, ordered the part, and replaced the resistor. After putting the...