Mitsubishi 3000GT & Dodge Stealth Forum banner

Search results

1-20 of 138 Results
Advanced Search
  1. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    Thats about the distance i have, but it still doesn't seem right. I adjusted my pedal to try and get the most out of it and it does work now, but not as smooth as I think it should. I really want to be convinced its the master cylinder, but if the throw is within spec (if .75" is correct) then...
  2. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    So that bolt was fine on my car. Would have been nice if that was the issue, but unfortunately its something else.
  3. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    That measurement is actually the bore diameter of the master cylinder, but that link did have some good info on the loose bolt that I'm going to go check out now.
  4. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    Anyone able to get a measurement or locate a spec? The slave did not fix it. It currently is grinding going into gears, or wont go into gears, but isnt slipping at all.
  5. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    Yeah, I'm about 99% sure it is the correct one. The throw distance would really help determine if my issue is in the hydraulic system, or in the clutch fork. Although, the fact that it seems to get worse when it heats up might make it tough to track down because maybe my throw distance is 3/4"...
  6. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    No, it is the correct one, and it was the same as the one I pulled out.
  7. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    I was having issues disengaging the clutch fully. It would get more difficult as it heated up it seemed. I usually always grind in reverse. I adjusted the pedal under the dash and it shifted great, but then i started to slip because the slave cylinder was always slightly engaged. I don't...
  8. What is the Slave Cylinder throw distance?

    All Wheel Drive - DriveTrain
    I've been trying to find a spec, or someone that could measure a working system and haven't had any luck. Could someone tell me what the slave cylinder throw distance on should be? I measured ~5/8" - 3/4" at the farthest point on the fork while installed on the car. Is there a spec for this...
  9. Building boost fast, but no balls.

    Engine - Turbo
    Just wanted to update this. The cam sensor timing plate did come loose and slip about 2 teeth. Put some new roll pins in it and redid the timing and it's back to normal. Thanks for the help.
  10. Building boost fast, but no balls.

    Engine - Turbo
    Thanks for the replies. I did not replace the crank sprocket, only the drive pulley. The crank sprocket got pulled put partly because it was stuck to the drive pulley. After doing some research, I'm thinking that crank sensor plate may have came loose from the crank pulley and slipped. It...
  11. Building boost fast, but no balls.

    Engine - Turbo
    I verified TDC by removing the #1 spark plug and inserting a rod. It lined up with the front cam gears. I still need to remove the rear cam cover to verify the back cams are still in time. Does it sound feasible that it would run the way it does with the timing off? It idles pretty decent too.
  12. Building boost fast, but no balls.

    Engine - Turbo
    I know this is a long shot because I don't have enough info at the moment, but i figured I'd throw it out there during my lunch and see if anyone has an answer or at least get some ideas. 94 vr4, 15g's, afc controller, walbro hot wired, 550cc injectors, fmic, running 17 psi. I think thats...
  13. 94 Hybrid Datalogging/Knock Options?

    Engine - Turbo
    And are you running the latest version? I was wondering if I should consider downloading an older version and trying it.
  14. 94 Hybrid Datalogging/Knock Options?

    Engine - Turbo
    I thought i figured it out, but still no luck. I think i originally downloaded drivers for a 32 bit machine and just realized that this shitty laptop Im using is actually 64 bit. I re-downloaded 64 bit drivers, but still no luck. It continues to give me the 1.3x cable cannot be found. I'm...
  15. 94 Hybrid Datalogging/Knock Options?

    Engine - Turbo
    I checked yesterday and was able to see the com port, and I did download those same drivers. I'll play around with it at lunch today and see if I can get any communication. Thanks.
  16. 94 Hybrid Datalogging/Knock Options?

    Engine - Turbo
    I'm thinking I don't have the right drivers even though I've downloaded everything that I could find. When I use the 1.3 cable settings, I get Cable 1.3x or 1.3x or 1.3x cannot be found. I assume that is a driver issue? Any chance you remember which drivers youre using?
  17. 94 Hybrid Datalogging/Knock Options?

    Engine - Turbo
    So now that the weather is breaking I finally got one of these cables, modified it, and downloaded evoscan and I believe all the necessary drivers. However, I have not been able to get any connection. Evoscan continues to tell me I'm missing 'op20pt32.DLL, but I have downloaded everything I...
  18. [BLACKSTEALTH] LCDBC device, boost controller and TFT Logger & ECU monitor

    Parts for Sale
    How much for just the LCDBC? I dont need the actual boost controller or logger, just the LCDBC and obd2 cable for it.
  19. 1999 Black Dash/Center Console/Glovebox/Airbags/Knee Panel $400 OBO

    Parts for Sale
    1999 Black Dash/Center Console/Glovebox/Airbags/Knee Panel Ebay OBO I am selling this: http://www.ebay.com/itm/232248272622?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 I have it on ebay for $400 shipped but would obviously be open to much better offers outside of ebay and depending on...
1-20 of 138 Results
Top