Mitsubishi 3000GT & Dodge Stealth Forum banner

Search results

1-20 of 496 Results
Advanced Search
  1. Another Engine Swap - LS style

    General
    Just under 2" OD on the wastegate extension tube. 44MM Tial gates.
  2. Another Engine Swap - LS style

    General
    I’ll have to measure. around 2.0-2.5”. My turbo kit crossovers are only 2.25” OD. Sent from my iPhone using Tapatalk
  3. Another Engine Swap - LS style

    General
    Thanks:) Had some fancy parts come in today Unfortunately have 4 different components trying to occupy the same area. Think it’ll be fine once I make my own water pipes instead of the silicone kit.
  4. Another Engine Swap - LS style

    General
    Belt routing plan for water pump delete. Using an old mitsu eccentric timing pulley for a tensioner:)
  5. Another Engine Swap - LS style

    General
    $58 Amazon wastegate extension was not only about the same price as flanges, but also saved me time from cutting and welding. Worked perfect and wastegate is no longer trying to share the same space as the power steering pump pulley. Also put in a .3 bar spring in each to compliment the .4...
  6. 3S #1 ET Bounty, 6g vs 4g

    General
    how have not seen this miata build yet?! and why did that vid end before wildly uncontrollable, short wheelbase, burnouts?
  7. 68W10's 1,000HP or Bust Build Thread

    General
    any updates on this build?!
  8. Full-car build Part2 Billet 3.7L single turbo

    General
    Love how the engine bay looks with an intake like that
  9. Ninja Performance Coilovers

    General
    springs just hold the car up. ride quality is in the damping which is where all the low end ones suck as they do not have good rebound damping.
  10. Ninja Performance Coilovers

    General
    fortune auto evo 8/9 with supercar engineering adapters are worlds better than the megan and low level BCs
  11. 95 vr4

    Cars For Sale
    beautiful car
  12. Building a 600hp GTO the Finnish way

    General
    Great write up! Let's see pics of the car you rolled at the track. lol
  13. V1 68HTAs are Back!

    General
    I'd get a 5 bar sensor and run these at 40+ psi. They should hit hard!
  14. Another Engine Swap - LS style

    General
    It’s 1 cyl away from front mid engine. Tape measure is approx hub center.
  15. V1 68HTAs are Back!

    General
    http://www.forcedperformance.net/small16gfordsm These are the quickest spooling version that had been gone. Back but may be a limited time (depends on MHI supply) and on sale. This is 7cm housing and slightly smaller compressor. Better match for most 6g builds than the 8cm but either work.
  16. Another Engine Swap - LS style

    General
    Put the good ole stock bottom end 5.3 back together with some new MLS gaskets, China headstuds and the old stock heads that have Texas speed dual springs. Has the big mofo cam in it too. Mocking up for fbody PS pump, Davies Craig water pump, AEI cable drive fuel pump (not in yet), and new...
  17. So many facts wrong lol

    General
    wasted a minute 30 of my life. lol
  18. 3S #1 ET Bounty, 6g vs 4g

    General
    It’s just the internet where you can call people anything without expecting an appropriate response in person that may include tooth extraction.
  19. Single turbo exhaust mani

    General
    Considering stock manifolds make more than that with tiny peashooter dr750’s that doesn’t prove a whole lot. Lol. But it is cool that someone’s done it for a single. Really no reason they can’t flow a lot more than that.
  20. 3S #1 ET Bounty, 6g vs 4g

    General
    stop whining douchebag bitch and get back to building 7 sec drag engines and 8 sec street engines.
1-20 of 496 Results
Top