i was thinking about designing one and just putting it up on cafepress. basically you design it and they sell it, so no mess, no fuss, anyone who wants one buys one...no messing with paypal or getting reembursed.
i was thinking about designing one and just putting it up on cafepress. basically you design it and they sell it, so no mess, no fuss, anyone who wants one buys one...no messing with paypal or getting reembursed.
Now that's a good idea.
__________________
PEARL WHITE '93 VR-4 // Now running...
E16G's: 10.573 @ 135.01 (Trevor owns me )
E16G's: 11.28 @ 124.7 (Pure pump gas ET record )
14B's: 11.10 @ 127.3 (AWD 14B ET record. Take THAT, Trev! )
9B's: 12.78 @ 107.1
10th Amendment: The powers not delegated to the United States by the Constitution, nor prohibited by it to the States, are reserved to the States respectively, or to the people.
I respectfully and WHOLEHEARTEDLY disagree, this scenario is a tad bit too mercenary for my taste.
Last I checked, gatherings were about getting together and sharing a common interest, not about creating a platform to allow a member to take advantage of a "merchandising opportunity".
__________________
Why Abbie? abóborinha = little pumpkin in Portuguese 485 awhp(mustang dyno) on 93 pump gas (~524 dynojet equivalent)
Only 20.5 psi on my lil' ol' GT368s with no water or alky injection
i was thinking about designing one and just putting it up on cafepress. basically you design it and they sell it, so no mess, no fuss, anyone who wants one buys one...no messing with paypal or getting reembursed.
I like that idea too. You can have it before the meet, u can order as many as you like, other ppl can order them. Any size u want. Its gotta be one official shirt, Dont want the whole world start designing thsirts and putting it on cafe press.
All I ask is that you run the design thru the appropriate channels. Are u a graphics designer? Last year a lady on the baord designed it , her name is Traci Bandelin she also did the t-shirt for the NG.
How much woud a t-shirt be on cafe press? It needs to stay int he range of $10 - $15. Any profits from it should go back to the organizing committee or go towards a BBQ or something.
How much woud a t-shirt be on cafe press? It needs to stay int he range of $10 - $15. Any profits from it should go back to the organizing committee or go towards a BBQ or something.
The minimum I have seen shirts on cafepress is $22 plus shipping. Again, as I said before, a tad bit too mercenary for my taste.
I like that idea too. You can have it before the meet, u can order as many as you like, other ppl can order them. Any size u want. Its gotta be one official shirt, Dont want the whole world start designing thsirts and putting it on cafe press.
All I ask is that you run the design thru the appropriate channels. Are u a graphics designer? Last year a lady on the baord designed it , her name is Traci Bandelin she also did the t-shirt for the NG.
Im not a graphics designer or anything, but im getting to know my way around photoshop. I wans't thinking of anything too fancy though. Fooling around for a few minutes late last night i came up with this as a very rough basic idea
left breast:
With the same thing on the back across the top, much larger, only without the "T3XS" and maybe some sponsors or something below it.
But taking into consideration what you've said, i'm gonna take a step back and leave it in more capable hands. I have no idea who i would need to contact to make sure its licensed and official or whatever. Also, with cafepress your looking at $20+ each...however there are sites that do custom designed shirts for MUCH less...but they require bulk purchases, defeating my "no mess no fuss" reasoning...
Last edited by BlinkRA182 : 07-02-2009 at 12:44 AM.
Hmmmm... If it's a Polo - I have no problem spending $20+ on it... but if it's just a t-shirt like we usually do, I don't know if I'm as excited to shell out that much plus shipping on it.
We have a little time. It gives whoever does this time to source other options and make the best decision.
BTW, Greg - Nice design.
__________________
On the car:
- Titan Bending TD05 Headers / O2 Housings (8/19/2006)
- TD05 E16G's Braided feeds/returns (03/04/2007)
- DSM SMIC's
- Precision Turbo 680 CC Injectors
- E2K Fuel Loop
- E-Manage Blue w/ ignition Harness
- Custom 3'' exhaust from turbos back (T-Pros DP)
- Magnacore Wires
- 3SX Braided break lines, Carbotech Vented and Slotted Rotors, and Hawk Pads
- SBC-iD III Boost Controller
- K&N FIPK
- Ebay Y-pipe (shinny)
- GTO MR Gears / 5 spd rear end (Installed 07/18/2005)
- RPS Max Street Disc
- 120K and Rod/Main Bearings (Finished 12/16/2005)
- Walbro 255 lph f/p
"What the eff is this eff'ing world coming to where people can't even eff with eachother anymore? A world without eff'ing - eff that! I'd eff'ing slap someone!" - Me
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Re: Updates on the Texas Gathering '09.
)
)
)
406 AWHP @ 12psi with methanol on pumpgas
