![]() |
![]() |
|
|
#1 (permalink) |
|
TOO FAST TO CATCH!
|
Like the message says adds only. This thread will be posts for FS FT and WTB only. any non FS, FT, or WTB posts will be deleted. Please stick to PM the sellers or buyers.
RULES: Must include the following FS, FT, or WTB Part Price Description Location Picture
__________________
|
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
LurCh
|
Geoff, im going to break the rules only a little bit, I don't have a pic.
a guy came into work yesterday and told me about this so im going to let you all know since I don't have any cash. I have not seen this car or heard it run but I thought somebody would like to check it out. 1995 3000gt base dohc, 183,000 miles, manual transmission (claims no grinding) momo seats/steering wheel, + other accessories. $3500 sitawr 513-702-2749 he is in cincinnati TIS ALL GOOD CHRIS, thank you for following the guidelines ~Stealthmonkey
__________________
speed cost money, how fast can you afford to go?
It is amazing, i beat the hell out of the SL and it runs like a champ...the day I drive it normal (i got a speeding ticket the day before) I spin a bearing...this WTF moment brought to you by...Mitsubushi. (My car drove faster than my guardian angel could fly) ![]() (the angel is starting to get worried as the car nears completion) ![]() Last edited by Stealthmonkey : 03-28-2008 at 10:24 AM. |
|
|
|
|
|
#3 (permalink) |
|
Verified Seller
|
Alrighty - round 2 in selling the car commences. Looks like I just have to drop in a new fuel filter and she'll be running just fine (right now there is slight sputtering at start up which goes away after the car warms up). Here it goes:
1993 3000GT VR4 with '99 front end conversion ($3000) 6000K HID Conversion ($220) Seibon CF Hood ($650) Greddy S BOV IPS Hotwired Denso Fuel pump 1 Piece APCT CF Drive Shaft ($1100) Cianci A Pillar triple Gauge pod w/ ProSport boost, Oil Pressure, A/F Ratio gauges ($350) Custom Black Leather/Suede Seats ($700) Custom black carpet, suede headliner ($400) Custom leather door panel "3000GT VR4" stitching Custom Smokin' VR4 quadruple 8" sub box (fits in trunk) with 4 brand new Polk Momo subs ($650) '99 Rear garnish Deft Racing VLS (vertical door lift system) ($1700) 18x9 Saleen Chrome wheels ($650) Tein S-Tech lowering springs with new ECS Struts all around ($700) Rear Adj. Control arms OBX Downpipe to Borla Exhaust ($1100) This is about $11,000 in mods alone and doesn't include minor things like window tint (20% all around minus windshield), new headunit, new speakers all around, other polished parts (in the engine, 'Smokin VR4') etc... The car has just hit 160,000 miles and is running just like the day I bought it (almost 5 years and about 33,000 miles ago). I am the third owner. It has never been smoked in, no pets, and as far as the new interior goes, never been eaten/drank in. The interior was done roughly a year ago (about 8,000 miles). When I bought the car, the 120K service was immediately done, along with a minor engine rebuild (took it apart, new headgaskets, seals, etc...) as a precautionary measure. Turbos were also rebuilt and cleaned (these both occurred at 127,000). They burn no oil, nor have any shaft play. This car has been babied all its life and anyone can tell you, I drive like an old man. I just gave her an oil change, rotated/balanced the tires, had an alignment done and everything checks out fine. The few blemishes on the car are as such: there is a dent in the rear quarter panel, driver side. There is a decent scratch on the rear bumper (driver's side as well) and a smaller scratch on the wing. There has been a bra on the front end so there are little to no rock chips/scratches on the front bumper or hood. All paint is orginal minus the front bumper (which was painted during the conversion). Asking price: $13,500. As soon as a sunny day comes along, I will be taking some brand new shots, and will be putting it up on autotrader for a little more, so get the 3SI discount while you can. Slightly older pictures: ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Vaib
MY Car is for SALE http://www.3si.org/forum/f10/1993-bl...vr4-fs-415527/ Make my mini-city grow! http://citta-diluce.myminicity.com/ http://citta-diluce.myminicity.com/ind http://citta-diluce.myminicity.com/tra '99 Front End Conversion, Seibon Carbon Fiber Hood, 6000K HID Conversion, Open Air Intake Filter, Stainless Steel Y Pipe, Greddy S, Vac Redux, Ground Wire Kit, EGR Removed, 3rd Gen Lifters, IPS Hotwired Denso Fuel Pump, 1 Piece APCT Carbon Fiber Drive Shaft, HKS Electronic Boost Control, Cianci A Pillar Triple Guage Pod, Prosport Boost, Oil Pressure, Air/Fuel Ratio Gauges, Clarion SR6000 Two Way Alarm/Remote Start, Panasonic CQ-C8303U, Diamond Floor Mats, Custom Leather/Suede Seats courtesy of leatherseats.com, Deft Racing's VLS Kit, 18 x 9 Chrome Saleen Summer Wheels, Tein S-Techs, New ECS Struts, Rear Adjustable Control Arms, OBX Downpipe (cats removed), Borla Exhaust |
|
|
|
|
|
#5 (permalink) |
|
You Gotta be Kidding...
|
Wanted:
Im looking for a 1995+ SL or VR-4 3000GT. Preferably 97+. Let me know.
__________________
1998 3000GT SL - 120K Tune up, Short Ram with K&N Intake, Custom Downpipe and Exhaust straight to a Super 44, Ralliart Ground wire kit, Tons of extras... |
|
|
|
|
|
#6 (permalink) |
|
TOO FAST TO CATCH!
|
FS: 1994 Dodge Stealth RT TT
$7999 OBO Columbus, Ohio Check out link for description and pictures. http://www.3si.org/forum/f10/fs-94-d...99-obo-418173/ |
|
|
|
|
|
#7 (permalink) |
|
New User - Please be kind
|
Need Headlights (Only drivers side but a pair would be nice) and a driverside fender.
Also i'm parting out a 93 Talon TSI on columbus DSM FS Parting out 93 TSI - Columbus DSM Forums |
|
|
|
|
|
#8 (permalink) |
|
LurCh
|
FS
1991 3000gt SL-TT 4000 not running, 5000 running serious offers considered, please no lowballing not running at the moment the TT conversion includes completely rebuilt tt engine bore .055 over oversized forged Wiseco pistons 360cc injectors 2nd gen crank clevite bearings fresh rebuilt and port/polished heads wiseco oversized mls head gasket fresh rebuilt turbos FMIC + Piping spec stage 3 clutch Fidanza Lightweight flywheel Black Leather Front seats new timing tensioner and pulleys new water pump new oil pump special designed (by me) injector resistor pack that can switch back to the standard no resistors by unplugging the harness. if you want it I will leave in the stereo system too. nice pioneer/power acoustic combo with one 10" woofer in trunk. many other accessories and parts included too I start school in september in Nashville so I need to clear everything out for the move. Pics to come. To finish, this car needs the oxygen sensors wired, the oil cooler lines finished(im not very good at brazing), the nut that holds on the power steering line to the pump(misplaced it), one front timing cover, and somebody with the time and energy to finish her. Lenny has seen the love and energy I put into building just the engine. please somebody help me. im sad to see her go. |
|
|
|