Chicago Crew Thread #2 - Page 893 - 3000GT/Stealth International Message Center

Drjekkyl3 · 05-01-2008, 12:04 PM

If anybody has a shift shaft spring from a 6 speed, let me know please.

maddog · 05-01-2008, 12:30 PM

Quote:

Originally Posted by Drjekkyl3

If anybody has a shift shaft spring from a 6 speed, let me know please.

are you talking about the spring to put pressure on the detent balls for the shift shaft?

if so i would imagine it wouldnt be to hard to source one somewhere else like a hardware store or if you want to get picky you could go to applied industrial in person and have them spec the spring and find an equivalent.

Drjekkyl3 · 05-05-2008, 12:44 PM

Quote:

Originally Posted by maddog

are you talking about the spring to put pressure on the detent balls for the shift shaft?

if so i would imagine it wouldnt be to hard to source one somewhere else like a hardware store or if you want to get picky you could go to applied industrial in person and have them spec the spring and find an equivalent.

I don't think we are talking about the same spring. This spring actually goes on the end of the shift shaft. It does not come in contact with the detent balls as far as I can tell. Where is applied industrial at? I may have to run over there as I haven't heard back from Frank at Kormex.

maddog · 05-05-2008, 01:44 PM

Quote:

Originally Posted by Drjekkyl3

I don't think we are talking about the same spring. This spring actually goes on the end of the shift shaft. It does not come in contact with the detent balls as far as I can tell. Where is applied industrial at? I may have to run over there as I haven't heard back from Frank at Kormex.

so your talking about the skinny wire, long spring that is on the end of the actual shifter mechanicsm that bolts onto the tranny?

look up applied, they have places everywhere

Drjekkyl3 · 05-05-2008, 02:05 PM

Quote:

Originally Posted by maddog

so your talking about the skinny wire, long spring that is on the end of the actual shifter mechanicsm that bolts onto the tranny?

look up applied, they have places everywhere

That's exactly the spring i'm talking about.

I looked up applied, didn't see any springs on there website. I guess i'll call them anyways.

stealthxtreme4 · 05-05-2008, 04:19 PM

The rolling shell I have has a filter T'ed into a line that goes on the driverside to the front and rear valve cover. ( That's what he had on the old motor ) Is that ok?

Never seen that done before on the driver side...

Anyways, red car is almost running. Did intake piping, and d/s intercooler, and oil cooler... Now I need to solder the MAF plug back on.

i3igpete · 05-06-2008, 08:04 AM

bridge, just saw the sig

maddog · 05-06-2008, 08:34 AM

Quote:

Originally Posted by i3igpete

bridge, just saw the sig

ha!

bridge · 05-07-2008, 10:23 AM

pete, just saw your sig

and so it begins

disturbedkorn · 05-07-2008, 11:12 AM

Yes pimp him out so the shop can pay for us to run One Lap of America.

05-05-2008, 04:19 PM	#8926 (permalink)
stealthxtreme4 Wannabe Join Date: Jan 2003 Location: Chi-Town / Purdue Drives: 91' Sable Black VR-4 Trader Rating: (24)	Re: Chicago Crew Thread #2 The rolling shell I have has a filter T'ed into a line that goes on the driverside to the front and rear valve cover. ( That's what he had on the old motor ) Is that ok? Never seen that done before on the driver side... Anyways, red car is almost running. Did intake piping, and d/s intercooler, and oil cooler... Now I need to solder the MAF plug back on. __________________ 1991 3000GT VR-4 1992 3000GT VR-4: Work in Progress

05-06-2008, 08:04 AM	#8927 (permalink)
i3igpete ''the professor'' Join Date: Feb 2005 Location: Chicago, IL Drives: GoPigGo v2.0 Trader Rating: (72)	Re: Chicago Crew Thread #2 bridge, just saw the sig __________________ Maddog Performance Engineering we will jack up your car on the oilpan and send a 9b through the windshield

05-07-2008, 10:23 AM	#8929 (permalink)
bridge cougar in training Join Date: Jul 2007 Location: never neverland Drives: aatif's drunk ass Trader Rating: (1)	Re: Chicago Crew Thread #2 pete, just saw your sig and so it begins __________________ Maddog Performance Engineering Home of the 13T Record DISRESPECT HIM for sales rep, please call 630-890-5033 any time day or night 91 VR4 Jamaican Blue 1 of 72 obx intake, tien s springs, hks ssqv, stillen dp, carbotech brakepads, adjustable control arms, and much more to come

05-07-2008, 11:12 AM	#8930 (permalink)
disturbedkorn AFPR = Timing Control Join Date: Mar 2002 Location: Des Moines, Iowa Drives: An all-weather racer Trader Rating: (5)	Re: Chicago Crew Thread #2 Yes pimp him out so the shop can pay for us to run One Lap of America. __________________ Maddog Performance Engineering - - - Home of the 13T Record --------------------------------------------------------------------------------------------------------------------------------------------------------- We've done it all: 60k, 120k, turbo rebuilds, turbo upgrades, stereo installation, custom intercoolers, hybrid window regulators, ecu repairs, active areo motor rebuilds, manual conversion, rwd conversion, hybrid trans to name a few. --------------------------------------------------------------------------------------------------------------------------------------------------------- Located off of I-294 near 127th St. and Rt. 83 For a sales rep, please call 630-890-5033. Special this month: OEM parts at only a 45% markup. Last edited by disturbedkorn : 05-07-2008 at 01:16 PM.

Sponsored Links
3000GT/Stealth International Message Center Advertisement