Chicago Crew Thread #2 - Page 616 - 3000GT/Stealth International Message Center

Damon · 05-18-2006, 12:48 PM

Quote:

Originally Posted by GTOGIRL3000

Imagine that hail pelting a big ass metal roofed pole barn! Sounds like a warzone.

talskinyguy · 05-18-2006, 01:13 PM

Damon, Im picking up the trailer in the begining of June. Ill give you a call when that gets closer. Do you have a place inside a barn where I can put it, or is it going to sit outside?

Also, the trailer is close to 3000lbs, so just make sure the hitch on her truck is rated to pull around 7000lbs or more.

GTOGIRL3000 · 05-18-2006, 05:20 PM

Quote:

Originally Posted by Sanjay

"Caution SLOOOOOW down because I'm DWA"

And for those that didn't get it, it means "Driving While Asian"

Last time I checked this pertains to you as well

stealthxtreme4 · 05-19-2006, 08:47 AM

I'm going to be in chicago today... If anyone wants to join me to look at a 94' VR-4 with 35k miles, and grab lunch with dave slow, lemme know...

574-360-4684 I'm getting off 95th street off 294.. To give you an idea on area.

GTOGIRL3000 · 05-19-2006, 11:16 AM

Cool, i get off of work at 5pm, I'll give Dave a ring and see whats going on

sluggo · 05-19-2006, 12:33 PM

Hello,

The gathering is this Sunday, May 21, from 2 pm - ? The thread is here http://www.3si.org/forum/showthread....29#post3703129 for address and phone. We can't confirm or deny, but Sanjay may or may not make an appearance. If he shows, no autographs please. If you can't make this, be at the next one...

Open to all, have a good time.

The weather should be good.

You will now be returned to your regularly scheduled thread.

Damon · 05-19-2006, 01:07 PM

Quote:

Originally Posted by talskinyguy

Damon, Im picking up the trailer in the begining of June. Ill give you a call when that gets closer. Do you have a place inside a barn where I can put it, or is it going to sit outside?

Also, the trailer is close to 3000lbs, so just make sure the hitch on her truck is rated to pull around 7000lbs or more.

Unfortunately, no. The old red barn doesn't have enough clearance and the pole barn has horse stalls and other vehicles and crap in it already. Although there's a HUGE pile of scrap metal inside the pole barn acting as a waste of space and general safety hazard. I've been wanting to trailer it all to DeKalb but just can't move the stuff by myself. If it were gone there might be enough room but that's a big trailer bro.

If not, I was thinking if we parked the trailer on the back side of the red barn it would be somewhat sheltered from the elements but if you're not comfortable with that, totally your call. I think the hitch we have is rated to 6000lbs. but I'll have to check.

talskinyguy · 05-19-2006, 01:21 PM

Do you have 220 in the barn? I just bought a plasma cutter. It could make easy work of the scrap metal if its big. And if you are just throwing it away I may be interested in some of it.

Having the trailer outside isnt a big problem, I just needed a place to put it for cheep.

Damon · 05-19-2006, 03:54 PM

I've got 220 in the garage but not the pole barn. It's probably not necessary to cut, its just way too big and awkward for me to move alone. You can take a look at it but its a lot of ancient agribultural shit. Those long flexible screws for hopperrs, grating, augers, big pipes, "farm things" I can't even identify. I'm sure most of it is worth something to SOMEBODY but I can't very well put up on eBay... "Big metal pumpy tray looking thing"? I figured I could at least make a few bucks from the metal yard but you can take a look first.

TsunamiStealth · 05-19-2006, 06:18 PM

Quote:

Originally Posted by 1500awhp

Did you go on saturday?

nah it was too gloomy, I can't run on the slicks without a driveshaft loop. I should be picking up tires for skinnies next week.

05-18-2006, 01:13 PM	#6152 (permalink)
talskinyguy High-Fivin BAMF Join Date: Jan 2003 Location: Dekalb, IL Drives: with 714ft/lbs Trader Rating: (23)	Re: Chicago Crew Thread #2 Damon, Im picking up the trailer in the begining of June. Ill give you a call when that gets closer. Do you have a place inside a barn where I can put it, or is it going to sit outside? Also, the trailer is close to 3000lbs, so just make sure the hitch on her truck is rated to pull around 7000lbs or more.

05-19-2006, 08:47 AM	#6154 (permalink)
stealthxtreme4 Wannabe Join Date: Jan 2003 Location: Chi-Town / Purdue Drives: 91' Sable Black VR-4 Trader Rating: (27)	Re: Chicago Crew Thread #2 I'm going to be in chicago today... If anyone wants to join me to look at a 94' VR-4 with 35k miles, and grab lunch with dave slow, lemme know... 574-360-4684 I'm getting off 95th street off 294.. To give you an idea on area. __________________ 1991 3000GT VR-4 1991 Nissan Pathfinder 4x4

05-19-2006, 11:16 AM	#6155 (permalink)
GTOGIRL3000 block rockin beats Join Date: Mar 2004 Location: Virginia Beach Drives: My Girlie Girl Trader Rating: (11)	Re: Chicago Crew Thread #2 Cool, i get off of work at 5pm, I'll give Dave a ring and see whats going on

05-19-2006, 12:33 PM	#6156 (permalink)
sluggo Wing Attack Plan "R" ? Join Date: Feb 2003 Location: Chicago (Skokie) Drives: like Steve McQueen Trader Rating: (2)	Re: Chicago Crew Thread #2 Hello, The gathering is this Sunday, May 21, from 2 pm - ? The thread is here http://www.3si.org/forum/showthread....29#post3703129 for address and phone. We can't confirm or deny, but Sanjay may or may not make an appearance. If he shows, no autographs please. If you can't make this, be at the next one... Open to all, have a good time. The weather should be good. You will now be returned to your regularly scheduled thread. __________________ "Inflammable means flammable? What a country!" -Dr. Nick 1994 TT in Pearl "Notice Me" Yellow K&N Filter, HKS EVC-IV boost controller, DNP Y-pipe, dimpled rotors, RS-4 pads, braided steel brake lines, speed bleeders, 3rd generation lash adjusters, Magnacore wires, Michelin Sport pilots, Southbend DXD clutch, 120K service done at 104K, Blackstone Labs oil analysis, 3 out of 4 Maximal Performance solid engine mounts. Mopar Jeff "seal of approval". RPS Stage II Clutch ... *Now with even more parts* designed to fail in the first 1,000 miles! God Bless our Troops...thank you!**

05-19-2006, 01:21 PM	#6158 (permalink)
talskinyguy High-Fivin BAMF Join Date: Jan 2003 Location: Dekalb, IL Drives: with 714ft/lbs Trader Rating: (23)	Re: Chicago Crew Thread #2 Do you have 220 in the barn? I just bought a plasma cutter. It could make easy work of the scrap metal if its big. And if you are just throwing it away I may be interested in some of it. Having the trailer outside isnt a big problem, I just needed a place to put it for cheep.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-19-2006, 03:54 PM	#6159 (permalink)
Damon Paternus Expectus Join Date: Nov 2001 Location: Chicagoland, IL Drives: 95/*99 Stealth TT Trader Rating: (4)	Re: Chicago Crew Thread #2 I've got 220 in the garage but not the pole barn. It's probably not necessary to cut, its just way too big and awkward for me to move alone. You can take a look at it but its a lot of ancient agribultural shit. Those long flexible screws for hopperrs, grating, augers, big pipes, "farm things" I can't even identify. I'm sure most of it is worth something to SOMEBODY but I can't very well put up on eBay... "Big metal pumpy tray looking thing"? I figured I could at least make a few bucks from the metal yard but you can take a look first.