Chicago Crew Thread #2 - Page 199 - 3000GT/Stealth International Message Center

justatwinturbo · 10-12-2004, 04:29 PM

Quote:

justatwinturbo - I'd love to hear more about your MX6... that's what I had before my Stealth TT. A few of us ran into a guy at Great Lakes Dragway that had a custom turbo system on his KLZE... can't remember what he ran though. Maybe Andy will chime in. Anyway, welcome!

i just sent the engine into the machine shop, its getting bored .10 over, and stroked to a 2.4 from a 2.0. je is doing my pistons, pauter rods, manley stainless steel valves, toga bearings, and oil pump. walbro fuel pump, 800cc or more injectors, not sure yet. haltec stand alone engine management. not sure if im going with a t3/t4, or a t4 turbo, with a custom built manifold. delgate wastegate. properly tuned, i dont see why the motor cant handle high boost. from what im told, the block and crank are as stout as a dsm. thats about the just of it, other than P&P and intake manifold, custom oil tank. if i think of anything else, i'll post it.

TsunamiStealth · 10-12-2004, 05:30 PM

Pegleg has a Project MX-6 sitting in the garage.

TsunamiStealth · 10-13-2004, 12:26 AM

HB was good. Was introduced to Candi and her whopping 600cc's.

And of course my Vika was there. Anywho onto to the less important stuff. Murray's gave me the wrong wheel hub assembly god damn it. I'm pissed. My old one as soon as I took the caliper off just pretty much fell apart into pieces. Then I took the studs out and they don't fit the new hub. Time to go back there and bitch 'em out. I knew they'd fuck up somehow.

ICEMAN2011 · 10-13-2004, 08:45 AM

hey guy i was wondering if u guys knew if this turbo will fit our cars. the turbos is from japan i'll attach pics too

MHI Part No 49195-57102
Application Part No H28139
Engine unknown
COOLING system WATER
Turbo model TD04H
Comp.Inducer Dia 43.5(mm)1.7in
Comp.Exducer 56mm (2.2 in)

iceman_ii · 10-13-2004, 09:31 AM

Quote:

Originally Posted by ICEMAN2011

hey guy i was wondering if u guys knew if this turbo will fit our cars. the turbos is from japan i'll attach pics too

MHI Part No 49195-57102
Application Part No H28139
Engine unknown
COOLING system WATER
Turbo model TD04H
Comp.Inducer Dia 43.5(mm)1.7in
Comp.Exducer 56mm (2.2 in)

The description is a TD04-16T

But... I believe the picture is of a TD05

Damon · 10-13-2004, 09:49 AM

Either way... NO, they will not fit the car as is. You can't just bolt 'em on. To install them you're looking at custom manifolds or adapter plates (if you can find them).

38 Cigarette · 10-13-2004, 01:00 PM

Quote:

Originally Posted by Damon

Either way... NO, they will not fit the car as is. You can't just bolt 'em on. To install them you're looking at custom manifolds or adapter plates (if you can find them).

I disagree.

With some superglue and duct tape, those will fit perfectly.

38 Cigarette · 10-13-2004, 01:04 PM

Quote:

Originally Posted by iceman_ii

The description is a TD04-16T

But... I believe the picture is of a TD05

Nice to hear from you Scott.

SSG BORI · 10-13-2004, 01:44 PM

It doesn't matter where? I just want to get some pics so i can bring them back and brag. i got Iceman and Karlo's number. i should be in Chi by next saturday. if nothing is going on cool, i catch you all when i get back for good. Hey Iceman, i have a CD form this guy with all kinds pics. Some crazy stuff too. Man i do brag about the cars on here alot. even showed some pics of the old crayon box. I CAN'T WAIT to be home again. You guys be safe out there.

Damon · 10-13-2004, 02:23 PM

Quote:

Originally Posted by 38 Cigarette

I disagree.

With some superglue and duct tape, those will fit perfectly.

And there you have it.

10-12-2004, 05:30 PM	#1982 (permalink)
TsunamiStealth 1320' to Fame Join Date: May 2002 Location: Chicago Drives: to Win Trader Rating: (4)	Re: Chicago Crew Thread #2 Pegleg has a Project MX-6 sitting in the garage. __________________ CHICAGO Crew "We wake up drunker than you were last night..." http://www.myspace.com/nospray

10-13-2004, 12:26 AM	#1983 (permalink)
TsunamiStealth 1320' to Fame Join Date: May 2002 Location: Chicago Drives: to Win Trader Rating: (4)	Re: Chicago Crew Thread #2 HB was good. Was introduced to Candi and her whopping 600cc's. And of course my Vika was there. Anywho onto to the less important stuff. Murray's gave me the wrong wheel hub assembly god damn it. I'm pissed. My old one as soon as I took the caliper off just pretty much fell apart into pieces. Then I took the studs out and they don't fit the new hub. Time to go back there and bitch 'em out. I knew they'd fuck up somehow.

10-13-2004, 09:49 AM	#1986 (permalink)
Damon Paternus Expectus Join Date: Nov 2001 Location: Chicagoland, IL Drives: 95/*99 Stealth TT Trader Rating: (4)	Re: Chicago Crew Thread #2 Either way... NO, they will not fit the car as is. You can't just bolt 'em on. To install them you're looking at custom manifolds or adapter plates (if you can find them). __________________ I got two speeds... Faster than you... and KICKING YOUR ASS. 1995 Dodge Stealth RT/TT - Black/Tan Leather (1 of 10) '99 Front end conversion with a thing or two...

10-13-2004, 01:44 PM	#1989 (permalink)
SSG BORI Forum Member Join Date: Jun 2003 Location: Great Lakes,IL Trader Rating: (0)	Re: Chicago Crew Thread #2 It doesn't matter where? I just want to get some pics so i can bring them back and brag. i got Iceman and Karlo's number. i should be in Chi by next saturday. if nothing is going on cool, i catch you all when i get back for good. Hey Iceman, i have a CD form this guy with all kinds pics. Some crazy stuff too. Man i do brag about the cars on here alot. even showed some pics of the old crayon box. I CAN'T WAIT to be home again. You guys be safe out there. __________________ "BORICUA BLOOD-AMERICAN PRIDE!"

Sponsored Links
3000GT/Stealth International Message Center Advertisement