Need some help picking out a stereo

[grtn316]

I'm looking for something inexpensive. I am planning on doing a carpc down the road so I don't want to spend too much. Anyways, I found this:

http://www.crutchfield.com/S-sVA9044...01&i=113DPX501

on ebay for about $200. I would really like a DD stereo just to fill up the space (no other reason). Anyways, will this fit deck fit? What other hardware will I need?


Thanks

[jpyounis1]

yea, when i upgraded my deck i looked at that, but bought an alpine instead.
ok for compatibility...crutchfield includes harnesses and other hardware free including a wire map... i believe.

1. if you are running all stock now and have a infinity system with a amp, the amp will need to be bypassed which includes cutting the wires at the amp for each speaker and wiring it to the HU direct.
2. if you dont have a amp. it should work fine with the harness they give you. or you may need to cut the speakers at the harness and wire them to rca depending on that deck, im not sure if it uses rca for speakers like my alpine or if it takes it in the harness.
3. it should bolt right in. if you have a cd changer...thats useless after you put the kenwood in.

good luck

[Dave57]

Originally Posted by grtn316

I'm looking for something inexpensive. I am planning on doing a carpc down the road so I don't want to spend too much. Anyways, I found this:

http://www.crutchfield.com/S-sVA9044...01&i=113DPX501

on ebay for about $200. I would really like a DD stereo just to fill up the space (no other reason). Anyways, will this fit deck fit? What other hardware will I need?


Thanks

You can use a single din and the factory cubbie. ($10) Look at the panasonic 31 watt single din units too!