Making a plexyglass enclosure? - 3000GT/Stealth International Message Center

94DodgeStealthRT · 10-03-2008, 09:58 AM

Good idea or bad? I'm just trying to do something to fit behind my bucket seats or maybe remove them and fit an enclosure there. I read all five pages of the other forum similar to this and it was pretty interesting..

Just wanting to make something that will look nice and flasy.. Thanks

JamesRHayman · 10-03-2008, 11:21 AM

Im not sure exactly what you are trying to do...but right off the bat, i would recommend against Plexiglas, you should use 1/2" Lexan, looks the same, but is the bullet proof equivelant, cuts nice and easy with a jig saw, just keep the protective plastic wrap on when cutting it and wet it down with WD-40 as you are cutting to make nice clean and smooth cuts.

10-03-2008, 09:58 AM	#1 (permalink)
94DodgeStealthRT Forum Member Join Date: Sep 2008 Location: Saint Louis Drives: 94 RT/ 92 Celica GT Trader Rating: (0)	Making a plexyglass enclosure? Good idea or bad? I'm just trying to do something to fit behind my bucket seats or maybe remove them and fit an enclosure there. I read all five pages of the other forum similar to this and it was pretty interesting.. Just wanting to make something that will look nice and flasy.. Thanks

10-03-2008, 11:21 AM	#2 (permalink)
JamesRHayman James R Hayman Join Date: Jun 2007 Location: BC, Canada Drives: 91 Dodge Stealth R/T Trader Rating: (0)	Re: Making a plexyglass enclosure? Im not sure exactly what you are trying to do...but right off the bat, i would recommend against Plexiglas, you should use 1/2" Lexan, looks the same, but is the bullet proof equivelant, cuts nice and easy with a jig saw, just keep the protective plastic wrap on when cutting it and wet it down with WD-40 as you are cutting to make nice clean and smooth cuts. __________________

Sponsored Links
3000GT/Stealth International Message Center Advertisement