The 315-Watt Mitsubishi/Infinity® CD Audio System with 7 Speakers

[TooFast4Radar]

I saw this on e-bay, something you might find interesting:

http://cgi.ebay.com/PERIPHERAL-MITAH...QQcmdZViewItem

Supposedly you can use aftermarket amps with the stock Infinity amp using that cable.

Also, do you know if those single-din Infinity headunits will plug into a 91-93 car? I saw a 95TT with Infinity speakers using the non-Infinity double-din headunit and it was working. I've also seen the same headunit (looks the same) on 91-93 non-Infinity cars, but it's possible it's a different model headunit that just looks the same.

[Keith_from_GpTx]

so was the only diff in wireing the amp the speeker out puts on the amp? what if anything else did u have to change?

can you post a pic showing what you had to do to fix the plug?

i am totaly into the factory idea if you read my post on my system i have the j-spec navigation dash. i have no idea what it can out of

[Dave57]

Originally Posted by TooFast4Radar

I saw this on e-bay, something you might find interesting:

http://cgi.ebay.com/PERIPHERAL-MITAH...QQcmdZViewItem

Supposedly you can use aftermarket amps with the stock Infinity amp using that cable.

Also, do you know if those single-din Infinity headunits will plug into a 91-93 car? I saw a 95TT with Infinity speakers using the non-Infinity double-din headunit and it was working. I've also seen the same headunit (looks the same) on 91-93 non-Infinity cars, but it's possible it's a different model headunit that just looks the same.

Thats a great cable! It can be used either way Stock HU on an aftermarket amp or replacement hu on the infinity amp. Check out my amp installation thread in my sig for the cable uses, and the 3si audio faq.
Anything is possible recently I made a plug and play adaptor to test non infinity stock units in infinity systems. ( a line output converter wired between two radio plugs 1 male and 1 female)
I have sold several infinity conversion kits they can be installed in any non infinity 6 speaker Mitsu. Eclipse and talon too.

[MaG18]

Originally Posted by bnorris85

I think at the next gathering im going to put a sign in my trunk that says "don't be shy, sit inside"

The way my shit is set up its not loud if your standing behind the trunk area. Also they had me turn it up so much to hear the subs that the speakers inside were way to loud if you sat in the seat. I just dont listen to my music that loud lol.

its too bad that mag didnt have his stereo on, it was very clear from what i heard. Having the sub firing into the glass like he had is the best.

thanks alot man I would have turned it on but i have a squeaky belt and need the car on for the sub and didnt wwant to annoy people so i left it off, oh well



and i saw the car but didnt hear it

[Dave57]

Originally Posted by Keith_from_GpTx

so was the only diff in wireing the amp the speeker out puts on the amp? what if anything else did u have to change?

can you post a pic showing what you had to do to fix the plug?

i am totaly into the factory idea if you read my post on my system i have the j-spec navigation dash. i have no idea what it can out of

Obviously the car had different speakers in the front but the wiring was never touched at the amp for that install (look in my sig for the link) The amp plug has to be rewired. The amp plug has two wings that fold back. After you do that you need a jewelers screwdriver to release the nylon pin holders from the front. You just hold the pin lock tab on each pin so you can pull the pins. Once you get the first few it is really easy.

[golfpro]

Excellent write up, and it sounds like you scored big points with Deb. Always a good thing. Great ideas on how to upgrade and still remain "stock."
-golfpro

[L_P]

Dave if you start collecting the plugs you could make an adapter and sell the amp and the plug as a kit, I bet you could sell quiet a few of them. do you know all the specs on the amp? RMs and max watt per channel?
-John

[Dave57]

Originally Posted by golfpro

Excellent write up, and it sounds like you scored big points with Deb. Always a good thing. Great ideas on how to upgrade and still remain "stock."
-golfpro

She loves it! Her Dad said it's going to cause hearing damage LOL

[Dave57]

Originally Posted by L_P

Dave if you start collecting the plugs you could make an adapter and sell the amp and the plug as a kit, I bet you could sell quiet a few of them. do you know all the specs on the amp? RMs and max watt per channel?
-John

Need males and females though I guess you've done some pin pulling

RMS wattage??? If one would assume worse case and Mitsu to rate it at 315 Peak. So 160 RMS watts is reasonable Via the peak/2 formula. Or is it the peak x.707=220 watts formula that applies. But then again since the distortion spec never comes into play in these factory systems maybe its 315 watts rms @ 10% distortion. All we have to go by with these is the advertised spec. One good thing is they are still making the amp in 06

[L_P]

So we dont know then....
do you have a model number? maybe something to go off of?
-John