Greddy Type S CLONE - 3000GT/Stealth International Message Center

Wildarmz · 08-02-2006, 09:23 PM

In my experience, they like to leak. When i was pressure testing, i found leaks at the adjustment screw and the main 'cap' (where purple meets silver). I had to open it up and use silicone to seal up the gasket, and used thread sealant on the adjustment screw.

smokinvr-4 · 08-03-2006, 12:45 PM

all those BOV clones out there are pretty much crap IMO, there was a review on them in a magazine a while back.

I think there are a lot of off brand BOV's that are decent, but these blantant rip offs are not.

08-02-2006, 09:23 PM	#1 (permalink)
Wildarmz Brees-y in the Big Easy Join Date: Aug 2003 Location: Franklin, TN Trader Rating: (103)	Greddy Type S CLONE In my experience, they like to leak. When i was pressure testing, i found leaks at the adjustment screw and the main 'cap' (where purple meets silver). I had to open it up and use silicone to seal up the gasket, and used thread sealant on the adjustment screw. __________________ interested in helping out with an established 3S site? pm me

08-03-2006, 12:45 PM	#2 (permalink)
smokinvr-4 Banned from Classifieds Join Date: Jan 2002 Location: Arizona Drives: Smokinvr4@hotmail Trader Rating: (100)	Re: Greddy Type S CLONE all those BOV clones out there are pretty much crap IMO, there was a review on them in a magazine a while back. I think there are a lot of off brand BOV's that are decent, but these blantant rip offs are not.

Sponsored Links
3000GT/Stealth International Message Center Advertisement