Twins Converstion Part List

[PMIPro]

Does anyone have a list of every part i will need to get in order to convert my na 1991 3000gt SL ATX to the vr4 twin turbo.. i just had my tranny and engine rebuilt... bout 200 miles on them... i need a complete parts list to change it to a TT like the vr4 set-up.

[LeRoyDL]

dang thought the links where sticky in this section, gimme your email I will send you the bible/parts list. Its a bitch to search for w/o being about to use "TT"

[brstman]

Send it to a2003r6@mchsi.com also

[Disaster092]

hey please send it to me too if you dont mind cheatdirect@hotmail.com

[MJblueStealthRT]

Here's a few links that should help you out.
http://www.bobthegreat.com/pages/myc...rbo/index.html

http://www.geocities.com/mo0cow2003/mookitten.html

http://www.socal3s.com/techinfo/iceTTconvo.html

[PMIPro]

send it to tx3kgtman@valornet.com

[Xtreme2k2]

I remember finding this and saving it:

" Main Components:
-2 Turbos
-Right Exhaust Manifold
-Left Exhaust Manifold
-Front 02 Housing
-Front Precat
-Rear Precat/O2 Housing
-Twin Turbo Downpipe (depending on Precats)
-2 Intercoolers (Right and Left)
-All Intercooler Piping Including Ypipe
-Intake T Pipe
-Intake Pipe to Front Turbo
-Intake Pipe to Rear Turbo
-Larger Fuel Injectors (TT 360cc Injectors)
-Twin Turbo Fuel Pump w/ Fuel Pump Assembly (Walbro 255lph Fuel Pump)
-Thermostat Housing
-Stock Blowoff Valve or Aftermarket
-TT Plenum (not necessary but doesn't hurt)
-1 EGR Block off Plate (Get 2 if your using TT Plenum)
-Testpipe 2.5" diameter, w/ O2 Bung Welded 2-3 inches from one of the sides
-6 NGK Copper Sparkplugs
-Twin Turbo Front Motor Mount Bracket
-Lower Compression Pistons (optional)
-All Heatshields (optional)

Oil and Cooling: (All from Twin Turbo cars)
-Oil Cooler
-Oil Cooler feed and return lines w/ Eye Bolts
-oil filter bracket (Get new or from a newer car)
-Joint for the Rear Turbo Feed Line (MD161392)
-Front and Rear Oil Feed Lines w/ Eye Bolts (Get New)
-Front and Rear Oil Return Lines
-Front and Rear Water Coolant Feed Lines W/ Eye Bolts
-Front and Rear water coolant Return Lines w/ Eye Bolts

Electronics and Boost:
-Boost Guage
-EGT Guage
-Air/Fuel Guage
-Manual Boost Controller or Electronic Boost Controller
-SAFC or equivilant fuel Management Computer
-Knock Sensor (not necessary)
-Water Injection (depending on what compression pistons)
-Fuel Injector Resistor Pack (Optional)

Gaskets:
-Exhaust Manifold Gaskets (2)
-Front Turbo to O2 Housing Gasket (1)
-Rear Turbo to Precat Gasket (1)
-Front O2 Housing to Precat Gasket (1)
-Front Precat to Downpipe Gasket (1)
-Rear Precat to Downpipe Gasket (1)
-Downpipe to Cat Gasket (1)
-Oil Return line Gaskets (4)
-Oil Feed line Copper Gaskets (7)
-Water Feed/Return Line Copper Gaskets (8)
-Oil Cooler Feed/Return Line Copper Gaskets (4)
-Oil Filter Bracket Gasket (1)
-Rear Precat EGR Gasket (1)
-Plenum EGR Gasket (1) - OPTIONAL
-Throttle body Gasket (1)
-Plenum Gasket (1)
-Thermostat housing to Header Gaskets (2)
-Exhaust Manifold to Turbo Gasket (2)
-Turbocharger Seal Ring (2)

Extra Material:
-4mm Vacuum Hoses
-RTV Silicone for Oil Pan
-Teflon Paste and Teflon Tape
-Bolts/Nuts for different stuff
- All of the exhaust components have C-Nuts so I recommend getting them from the dealer so stuff doesn't come lose "

credit to the actual person that created it, which I forget

[sexybluelady]

That's alot of crap to get. looks like the whole kit, thanks ^_^ I'm going to start collecting parts very slowly, so that by in about 1 1/2 I will have everything and the car will be payed off.

[sexybluelady]

That's alot of crap to get. looks like the whole kit, thanks ^_^ I'm going to start collecting parts very slowly, so that by in about 1 1/2 I will have everything and the car will be payed off.

[deft spyder]

http://www.importprecision.com/tt.htm

Here's the list I worked with, most of which I got from Todd, "extremwlr".

It includes all of the gaskets, bolts, etc that you would need to do the conversion with all new gaskets, which is a really good idea.

It has some personal notes and the names of people whoa re supplying some parts, but you can easily strip out that stuff.