How difficult to use 300zx turbos? - 3000GT/Stealth International Message Center

RL7 · 07-18-2008, 03:54 PM

I have 2 or 3 tb022 turbos from a 300zx lying around. Would it be really difficult to use these on our engine? I've got some extra manifolds that I can hack up, an extra 300zx exhaust, steel piping, and a welder. I'm assuming it will probably be easier and less expensive just to buy some stock 3S turbos, but I could be wrong.

green-lantern · 07-18-2008, 04:02 PM

Quote:

Originally Posted by RL7

I have 2 or 3 tb022 turbos from a 300zx lying around. Would it be really difficult to use these on our engine? I've got some extra manifolds that I can hack up, an extra 300zx exhaust, steel piping, and a welder. I'm assuming it will probably be easier and less expensive just to buy some stock 3S turbos, but I could be wrong.

There is quite a few things you need to do when doing a TT conversion and I think you would be adding a lot more work trying to do that (lots of headache). I would sell the other stuff then buy the 3s stuff.

Disrupter · 07-18-2008, 04:25 PM

^ I agree. With the amount of money you will dish out for custom fabrication, you could easily purchase all the parts needed to tt your car with used parts. Plus you could save money as well.

MK_94_3000GT · 07-18-2008, 04:31 PM

You could always just buy my turbos!!! O yea it would be more trouble than it would be worth I think, just don't let that discourage you if you really have your heart set on something. You just don't seem to. I mean if I let people talk me outta stuff I wouldn't have the car I have or the car I will have

07-18-2008, 03:54 PM	#1 (permalink)
RL7 Forum Member Join Date: Oct 2001 Location: Hollywood, FL Trader Rating: (1)	How difficult to use 300zx turbos? I have 2 or 3 tb022 turbos from a 300zx lying around. Would it be really difficult to use these on our engine? I've got some extra manifolds that I can hack up, an extra 300zx exhaust, steel piping, and a welder. I'm assuming it will probably be easier and less expensive just to buy some stock 3S turbos, but I could be wrong.

07-18-2008, 04:25 PM	#3 (permalink)
Disrupter Crimson Jihad Join Date: Oct 2005 Location: Queens, NY Drives: An Angry Demon! Trader Rating: (12)	Re: How difficult to use 300zx turbos? ^ I agree. With the amount of money you will dish out for custom fabrication, you could easily purchase all the parts needed to tt your car with used parts. Plus you could save money as well. __________________ CAUTION: Over Boosting May Cause Accidental Orgasm. 1993 Mitsubishi 3000gt VR-4 1994 Mitsubishi 3000gt SL mtx..... I miss her! Dyno: 243awhp/280awt On stock boost(~8psi) mods: K&N/Greddy type-RS (Badly Heatsoaked + Boost Leak). Mods: K&N filter, HKS SSQV, Redline motor oil 10w40, IPS 3" DP, Custom single shot, SSR GT7's, Tein S-tech,MSD 8.5 Super conductor wires, NGK \|X Iridium spark plugs. Waiting install: Blitz DSBC, , Greddy fatt, Apexi Safc2, Apexi S-itc, Maximal mounts, FMIC, RobBecks 13t's, Maf-t, z06 maf, evo9 560cc, Denso supra pump. Contemplating: Small ones

07-18-2008, 04:31 PM	#4 (permalink)
MK_94_3000GT ATL Join Date: Sep 2007 Location: Columbus, Ohio Drives: 94 3000GT & Stealth Trader Rating: (34)	Re: How difficult to use 300zx turbos? You could always just buy my turbos!!! O yea it would be more trouble than it would be worth I think, just don't let that discourage you if you really have your heart set on something. You just don't seem to. I mean if I let people talk me outta stuff I wouldn't have the car I have or the car I will have

Sponsored Links
3000GT/Stealth International Message Center Advertisement