green-lantern TT conversion - Page 10 - 3000GT/Stealth International Message Center

Mr.3000 · 11-29-2007, 11:39 AM

Yea dude. With just a good clutch and solid engine mounts, you would be surprised as to how strong our tranny's really are when kept in good condition in the absence of wheel hop. But yea as cheap as we all want to be, we know we gotta get that real LSD haha

green-lantern · 11-29-2007, 11:47 AM

yes I will get a real one sooner(bang) or later($)

Wildarmz · 11-30-2007, 11:49 AM

Lookin' good!

green-lantern · 11-30-2007, 12:20 PM

Quote:

Originally Posted by Wildarmz

Lookin' good!

thanks Seb, I am getting close. It's good to see you around. Are you out of school now?

every one I bought most of my parts from him so if is doesn't work it's his fault

green-lantern · 11-30-2007, 01:08 PM

THIS SUCKS! I am still trying to remove a wire from the wiring harness so I can put it in the other spot for the O2 sensor. I have popped the sides off the sides of the plug but when I try and pull a wire from it it breaks I have only 2 tries left if someone knows how this is done PLEASE GIVE ME A CALL (865)335-0587

Paul

Mr.3000 · 11-30-2007, 01:19 PM

that thing is right where I want to mount the oil return

That thing was the quide for the dip stick lol. It's all good tho lol.

Quote:

Originally Posted by green-lantern

THIS SUCKS! I am still trying to remove a wire from the wiring harness so I can put it in the other spot for the O2 sensor. I have popped the sides off the sides of the plug but when I try and pull a wire from it it breaks I have only 2 tries left if someone knows how this is done PLEASE GIVE ME A CALL (865)335-0587

Paul

After you pop the things off on the sides, you should be able to actually open the wiring harness. If not then yours may have a clipping mechanism like mine. You will need a needle and some pliers and I will call and tell you how to do it.

It looks like your conversion is coming along and you have some really good ideas so good job on that. I'll be staying tuned

green-lantern · 11-30-2007, 01:42 PM

Quote:

Originally Posted by Mr.3000

that thing is right where I want to mount the oil return

That thing was the quide for the dip stick lol. It's all good tho lol.

yes it's fine I was worried about it hitting the inside part that I put in but it (the dipstick) seems to go in fine.

After you pop the things off on the sides, you should be able to actually open the wiring harness. If not then yours may have a clipping mechanism like mine. You will need a needle and some pliers and I will call and tell you how to do it.

It looks like your conversion is coming along and you have some really good ideas so good job on that. I'll be staying tuned

I have the bright green type (like Johns) let me see if I can't get the plug to come apart more. Feel free to give me a ring.

green-lantern · 11-30-2007, 01:52 PM

nope it doesn't seem to come apart any more. so the hell if I know. this is the last thing I thought would give me a hard time.

3000hybrid · 12-01-2007, 10:36 AM

Quote:

Originally Posted by green-lantern

I swear I don't care if my tranny flies into pieces! It has 160K on it and it is ready to die. Then I can tell the wife that I need a new transmission. Please don't lecture me sir.

I am so ashamed

LOL! Don't be ashamed. I still have an insert rattling around in my tranny. I personally can't afford a true LSD right now ( New house mod). It should be fine on the street. It will just wear out in a couple of months.

Looking good so far GL. I do have a few parts sitting in the garage left. Let me know if you need anything. I'll see if I can help ya out.-Dee

igota20hpweed · 12-01-2007, 06:56 PM

Quote:

Originally Posted by green-lantern

I swear I don't care if my tranny flies into pieces! It has 160K on it and it is ready to die. Then I can tell the wife that I need a new transmission. Please don't lecture me sir.

I am so ashamed

haha, this made me laugh

I replaced my tranny about six months ago when it exploded...wasnt even a launch either that killed it; it was when i slammed it into second gear. I heard a loud kaboom then saw that my speedo ceased to function. A few seconds later, a nasty stinch filled my cabin. Pulled over on the side of the road, and to my horror saw that my tranny was leaking fluid like crazy. This made me cry

Worst thing was it happened to me when i had nothing more than an intake and stage 2 clutch. So moral of this story...you might be getting that new transmission...just dont spend 2700 bucks like i did for one! Yeah, i got ripped a new one. I will install it myself next time god forbid it explodes again!

Nice progress btw...it's looking great!

11-29-2007, 11:39 AM	#91 (permalink)
Mr.3000 I love her▼ Join Date: Dec 2006 Location: Cary, NC Drives: T70 3000GT Trader Rating: (39)	Re: green-lantern TT conversion Yea dude. With just a good clutch and solid engine mounts, you would be surprised as to how strong our tranny's really are when kept in good condition in the absence of wheel hop. But yea as cheap as we all want to be, we know we gotta get that real LSD haha __________________ Project Z11A:My T70 Build Courtesy of Piedmont Custom Motorsports

11-30-2007, 11:49 AM	#93 (permalink)
Wildarmz Brees-y in the Big Easy Join Date: Aug 2003 Location: Franklin, TN Trader Rating: (103)	Re: green-lantern TT conversion Lookin' good! __________________ interested in helping out with an established 3S site? pm me

11-30-2007, 01:08 PM	#95 (permalink)
green-lantern cyber bully Join Date: Aug 2006 Location: tennessee Drives: like an idiot Trader Rating: (17)	Re: green-lantern TT conversion THIS SUCKS! I am still trying to remove a wire from the wiring harness so I can put it in the other spot for the O2 sensor. I have popped the sides off the sides of the plug but when I try and pull a wire from it it breaks I have only 2 tries left if someone knows how this is done PLEASE GIVE ME A CALL (865)335-0587 Paul

11-30-2007, 01:52 PM	#98 (permalink)
green-lantern cyber bully Join Date: Aug 2006 Location: tennessee Drives: like an idiot Trader Rating: (17)	Re: green-lantern TT conversion nope it doesn't seem to come apart any more. so the hell if I know. this is the last thing I thought would give me a hard time.

Sponsored Links
3000GT/Stealth International Message Center Advertisement