(((Mitsubishi MUT-II/MUT-III Datalogger))) - Page 19 - 3000GT/Stealth International Message Center

maddux317 · 02-09-2008, 10:59 PM

Did this show up in you guys' mail box or did it came to your door step? Ordered mine on 1/29 so I figured it should be here Monday or so, just wondering where I'll need to look for it lol.

Schank · 02-10-2008, 07:30 PM

It's coming from over seas so give it a little extra time. I will come, though, don't worry.

maddux317 · 02-10-2008, 07:51 PM

It actually showed up on Saturday, it just got delivered next door. Pretty solid looking cable..... Now I've just gotta get my car put back together so I can give it a try

Hannibalzero · 02-10-2008, 08:10 PM

Here's a question - is the same software used for model cable? IE. does the same software installation support OBDI, OBDII, andhybrid loggers?

I have a 94 TT covnersion that I want to use a TT ECU in. Rather than hacking the hybrid diagnostic port and wiring in an OBDI port, I am trying to see if there are some other logging options available. If an hybrid cable will allow for an OBDI software connection, then this logger sounds like a winner.

tfw a-ok · 02-11-2008, 06:07 AM

Quote:

Originally Posted by Hannibalzero

Here's a question - is the same software used for model cable? IE. does the same software installation support OBDI, OBDII, andhybrid loggers?

There is only one software version, not different versions for different appliactions. Remember, it's the protocol used by the logger so the only variable is the type of cable needed.

MadgwickTT · 02-11-2008, 07:17 AM

Ok so let me get this straight, for 99 dollers I can get my laptop datalogging my hybrid ecu? nothing else is needed?

Hannibalzero · 02-11-2008, 11:47 AM

Quote:

Originally Posted by tfw a-ok

There is only one software version, not different versions for different appliactions. Remember, it's the protocol used by the logger so the only variable is the type of cable needed.

Any chance the manufacturer would know for sure if a 94-95 logger cable (through a 94-95 diagnostic port) would allow the software to connect to an OBDI ecu? Would you be able to relay that question?

If they don't know, would someone with a 94-95 cable like to let me borrow it for a week?

tfw a-ok · 02-11-2008, 02:45 PM

Quote:

Originally Posted by Hannibalzero

Any chance the manufacturer would know for sure if a 94-95 logger cable (through a 94-95 diagnostic port) would allow the software to connect to an OBDI ecu? Would you be able to relay that question?

If they don't know, would someone with a 94-95 cable like to let me borrow it for a week?

I don't know the answer to you question but the cables for '94 up should be the same since 94-95 while hybrids had the standard obdll connector.

Agent|99VR4 · 02-17-2008, 12:12 AM

Version 2.1 is out but I cant seem to find a link to DL the new version just 2.0

simace · 02-18-2008, 11:41 AM

Quote:

Features currently being developed for January 2008 include: (You'll get free updates, but only if you register now!)
----------------------------------------------------------------------------------------
23) Diagnostic trouble codes support!
24) U.S.A. OBDII Universal Support!
25) SRS ECU support!
26) Innovate Aux input logging
28) Video WebCam and GPS Split and Lap Sector times. Playback/Record/Telemetry Syncronization with Video/GPS/Datalogger.

So, is 2.1 good on DTCs or nah

02-09-2008, 10:59 PM	#181 (permalink)
maddux317 Meet the twins Join Date: Nov 2002 Location: Jasper, AL Drives: 98 VR4 and 92 FWD TT Trader Rating: (23)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) Did this show up in you guys' mail box or did it came to your door step? Ordered mine on 1/29 so I figured it should be here Monday or so, just wondering where I'll need to look for it lol. __________________ 1998 VR4 - Red - 1 of 231 15g's \| PTE 550's \| Walbro 255 \| Apexi SAFC w/ Boomslang Harness \| Maximal Performance Solid F/R Mounts \| Stillen Downpipe \| MSD Superconductor 8.5s \| JIC Y-Pipe \| Old school ProBoost MBC \| EVOScan Logger (logging knock on OBDII baby!) \| Kazera KZ-A 18x8.5's \| Yokahoma AVS ES100 Tires 1/8: 8.1 @ 89 MPH, 1.9 60' (soft launch on stock clutch) - 16 PSI/rich tune & leaking stock y-pipe coming soon: more runs with MORE BOOST! ------------- 1990 Mustang GT - not stock - Gone but never forgotten..... ------------- 1992 Mitsubishi 3000GT SLTT - Formerly the SLSC - My first love (15g 10:1 TT Conversion) - Parting Out ------------- Old setup (worn 9b's, broken motor mounts, M&S tires, 6 psi) 1/8: 9.3 @ 85 MPH

02-10-2008, 07:30 PM	#182 (permalink)
Schank Forum Member Join Date: Mar 2006 Drives: '94 SL n '97 VR4 Trader Rating: (0)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) It's coming from over seas so give it a little extra time. I will come, though, don't worry.

02-10-2008, 07:51 PM	#183 (permalink)
maddux317 Meet the twins Join Date: Nov 2002 Location: Jasper, AL Drives: 98 VR4 and 92 FWD TT Trader Rating: (23)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) It actually showed up on Saturday, it just got delivered next door. Pretty solid looking cable..... Now I've just gotta get my car put back together so I can give it a try

02-10-2008, 08:10 PM	#184 (permalink)
Hannibalzero H to the izzO Join Date: Jan 2003 Location: Northern VA Drives: Recklessly Trader Rating: (55)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) Here's a question - is the same software used for model cable? IE. does the same software installation support OBDI, OBDII, andhybrid loggers? I have a 94 TT covnersion that I want to use a TT ECU in. Rather than hacking the hybrid diagnostic port and wiring in an OBDI port, I am trying to see if there are some other logging options available. If an hybrid cable will allow for an OBDI software connection, then this logger sounds like a winner. __________________

02-11-2008, 07:17 AM	#186 (permalink)
MadgwickTT Paid Member Join Date: Nov 2007 Location: Michigan Drives: 94 Stealth TT Trader Rating: (3)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) Ok so let me get this straight, for 99 dollers I can get my laptop datalogging my hybrid ecu? nothing else is needed?

Sponsored Links
3000GT/Stealth International Message Center Advertisement

02-17-2008, 12:12 AM	#189 (permalink)
Agent\|99VR4 Verified Seller Join Date: Feb 2006 Trader Rating: (28)	Re: (((Mitsubishi MUT-II/MUT-III Datalogger))) Version 2.1 is out but I cant seem to find a link to DL the new version just 2.0 __________________ Still doing the poly type mounts! 99 VR-4 Back to Life: Here ------------Family of 2 99 VR-4's---------- #185 of 287 R71 #189 of 287 W75 n-->

LinkBacks (?) LinkBack to this Thread: http://www.3si.org/forum/f42/mitsubishi-mut-ii-mut-iii-datalogger-395561/
Posted By	For	Type	Date
Norcal3s.com :: View topic - Updated (((Mitsubishi MUT-II/MUT-III Datalogger)))	This thread	Refback	04-09-2008 11:24 PM