My car wont stop HELP PLEASE

[MK_94_3000GT]

Originally Posted by 1bad3grs

you're bleeding them backwards.

it should be rear passenger, rear driver, front passenger, front driver.

Will retry in that order, is a speedbleeder necessary or is it possible to do without one.

[Dago Red Vr-4]

Its been done for decades without speedbleeders . My persnal opinion is go with the Speedbleeders for that one time no one is around to help you . I beleive the sequence is RT rear Lt front then Lt rear RTfront . The Rt front is closes to the ABS pump . Steve

[MK_94_3000GT]

So its more than likely just air in the lines at this point, nothing else? I am just making sure to cover all bases and make sure the car runs well

[rynz3s]

still wrong on the bleed order. By the manual it is ;
1st - right rear
2nd - left front
3rd - left rear
4th - right front

My next question would be does the VR4 use a larger master cylider and Is the booster the same. Let us know when you get it right. Thanks

[MK_94_3000GT]

Originally Posted by rynz3s

still wrong on the bleed order. By the manual it is ;
1st - right rear
2nd - left front
3rd - left rear
4th - right front

My next question would be does the VR4 use a larger master cylider and Is the booster the same. Let us know when you get it right. Thanks

Never thought about those two things, however when I read the necessary items for the brake upgrade they were not mentioned. I will retry in that order and see what happens this weekend with a speedbleeder

[Luke@tirerack]

Originally Posted by 1bad3grs

you're bleeding them backwards.

it should be rear passenger, rear driver, front passenger, front driver.

correct ... and as everybody else has said it sure sounds like air in the system

[MK_94_3000GT]

Alright we seem to have a consensus on whats wrong, will post back if that works. Any other ideas feel free to throw them out there

[MK_94_3000GT]

Can we come to a solid agreement on the order they should be bleed in? That would be helpful thanks again guys.

[92StealthTT]

from the shop manual, see attachment

[MK_94_3000GT]

cant argue that will try thanks