Axis Hiro Offset - 3000GT/Stealth International Message Center

2xmks · 05-12-2008, 08:52 AM

I am buying a set of Axis Hiro rims. The have looked and looked for an exact rear offset. I will be running a staggered set up:

19x8.5 35mm offset Front
19x9.5 25mm(??) Rear

A few people on here commented that "Ford" was running a 20mm offset in the rear(he has the exact setup I looking at). The lowest I can find for these rims is a 25mm offset.

If anyone knows please let me know.

turbosprentice · 05-12-2008, 08:58 AM

i'm not sure about the offset unless you don't mind the rims sticking out a centimeter or so? probably more for the rear. you generally want to keep it between 36-42offset range. stock offset is 46 which is what you want to be close to.

2xmks · 05-12-2008, 09:06 AM

I found a couple of posts were people tried the 45mm offset in the rear and it did not fit. So I am down to 25mm or 40mm.

05-12-2008, 08:52 AM	#1 (permalink)
2xmks Forum Member Join Date: Sep 2006 Location: Antelope, CA Drives: 1996 VR-4 Trader Rating: (1)	Axis Hiro Offset I am buying a set of Axis Hiro rims. The have looked and looked for an exact rear offset. I will be running a staggered set up: 19x8.5 35mm offset Front 19x9.5 25mm(??) Rear A few people on here commented that "Ford" was running a 20mm offset in the rear(he has the exact setup I looking at). The lowest I can find for these rims is a 25mm offset. If anyone knows please let me know. __________________ 93mm Ross Pistons,Pauter Rods,3SX Port and polished heads,Webcams race cams,ARP main/head studs,South Bend Stage 4"FE" clutch,720 cc injectors,Supra fuel pump,IPS FMIC, IPS TD05 headers/EVO III turbo kit,Tanabe exhaust, Hiro Axis 19x9.5 rear 8.5 front, Toyo Proxes T1R 285 rear 245 front

05-12-2008, 08:58 AM	#2 (permalink)
turbosprentice i can make your vtech cry Join Date: Jun 2007 Location: sheboygan, wisconsin Drives: '96 3000gt(base) Trader Rating: (2)	Re: Axis Hiro Offset i'm not sure about the offset unless you don't mind the rims sticking out a centimeter or so? probably more for the rear. you generally want to keep it between 36-42offset range. stock offset is 46 which is what you want to be close to. __________________ 3s parts fs http://www.3si.org/forum/showthread....37#post4686737

05-12-2008, 09:06 AM	#3 (permalink)
2xmks Forum Member Join Date: Sep 2006 Location: Antelope, CA Drives: 1996 VR-4 Trader Rating: (1)	Re: Axis Hiro Offset I found a couple of posts were people tried the 45mm offset in the rear and it did not fit. So I am down to 25mm or 40mm.

Sponsored Links
3000GT/Stealth International Message Center Advertisement