2009 3000GT Body Kit - Page 2 - 3000GT/Stealth International Message Center

THE Phreak · 06-23-2008, 01:33 AM

Do want

punch3d · 06-23-2008, 02:18 AM

sexy man, ill take it

1Forest1 · 06-24-2008, 07:20 AM

Very cool.
Could you post the original picture. I would like to see how the bumper curves line up, and if this could possibly be created by hacking the stock bumper.

Great work again.

lawdogg · 06-24-2008, 07:52 AM

Those headlights almost look close enough to work!

windsma · 06-24-2008, 08:29 AM

Looks good, 99 wing would be better,

I always love how the 3s can change slightly and, still look like they will come out next year.

sh1znack · 06-24-2008, 08:50 AM

If this body kit were available, I'd buy it right on the spot.

RoGusto · 06-24-2008, 10:37 AM

Thanks for the positive feedback guys. Always appreciated

Quote:

Originally Posted by 1Forest1

Very cool.
Could you post the original picture. I would like to see how the bumper curves line up, and if this could possibly be created by hacking the stock bumper.

Great work again.

Here is the Eclipse image I got the bumper from...

I also did a few chops with those ^^ Eclipse headlights also. Wasn't crazy bout them so I didn't post 'em but I'll post them if you want them

dbeltran24 · 06-24-2008, 11:59 AM

Quote:

Originally Posted by RoGusto

Someone Please make this bumper. Any vendors out there!!!! Its looks great

lawdogg · 06-24-2008, 12:04 PM

Quote:

Originally Posted by dbeltran24

Someone Please make this bumper. Any vendors out there!!!! Its looks great

Only thing I would change from a fabrication standpoint is the red section that comes up between the headlights. Way too thin to work. What if that was eliminated so it was just an opening between the bumper itself (and the black section over it) and the hood, between the headlights? A great vent, could have mesh in it, would look great. And would make the bumper actually feasible to fabricate, whether a urethane mold or fiberglass (I hope not).

RoGusto · 06-25-2008, 08:41 PM

Quote:

Originally Posted by lawdogg

Only thing I would change from a fabrication standpoint is the red section that comes up between the headlights. Way too thin to work. What if that was eliminated so it was just an opening between the bumper itself (and the black section over it) and the hood, between the headlights? A great vent, could have mesh in it, would look great. And would make the bumper actually feasible to fabricate, whether a urethane mold or fiberglass (I hope not).

Do you mean like this? I also added a '99 spoiler for those who wanted it

06-23-2008, 01:33 AM	#11 (permalink)
THE Phreak Norcal3s Spammer Join Date: Jan 2008 Location: Oakland ,CA Drives: Seductive Luxury GT Trader Rating: (0)	Re: 2009 3000GT Body Kit Do want __________________ 1992 3000GT SL 2.5" Straight Y-Pipe w/ Dual HKS Hi-Power TI ~Current Daily Driver ~ Generic Intake w/ K&N filter ~ NGK Spark Wires (do these count?) ~ Enkei lowering springs ~

06-23-2008, 02:18 AM	#12 (permalink)
punch3d Hmm what to say? Join Date: Jun 2008 Location: USA Drives: 1996 Red 3000GT Trader Rating: (0)	Re: 2009 3000GT Body Kit sexy man, ill take it

06-24-2008, 07:20 AM	#13 (permalink)
1Forest1 Isnt this a CAR SITE? Join Date: Jun 2006 Trader Rating: (1)	Re: 2009 3000GT Body Kit Very cool. Could you post the original picture. I would like to see how the bumper curves line up, and if this could possibly be created by hacking the stock bumper. Great work again. __________________ Public Stealth & 3000GT Picture Database - 1,500+ pictures. Thanks to everyone who contributed.

06-24-2008, 07:52 AM	#14 (permalink)
lawdogg Here for the tuna. Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (63)	Re: 2009 3000GT Body Kit Those headlights almost look close enough to work! __________________ 94 VR-4: 11.8 @ 116, 17psi, pump, 13Ts p.s. buy my stuff

06-24-2008, 08:50 AM	#16 (permalink)
sh1znack 3/S Addict Join Date: Mar 2007 Location: Tulsa, OK Drives: '95 VR4 Trader Rating: (0)	Re: 2009 3000GT Body Kit If this body kit were available, I'd buy it right on the spot. __________________ '94 Base / '95 VR-4: Test-Pipe, Intimidator Intake, Hallman MBC @ 14psi, Custom 3" exhaust, Greddy Type-RS BOV (open loop), Denso Fuel Pump, ProSport Boost Gauge, ProSport Air/Fuel gauge

Sponsored Links
3000GT/Stealth International Message Center Advertisement