Single T04e Vr4 - 3000GT/Stealth International Message Center

outkastvr4 · 06-10-2008, 03:43 PM

i have had many porblems with my twins so about 2 months ago i decide to go single turbo, i took a month to decide a setup and came up with
>garret t04e
>two rear manifolds
>2in piping(for manifold)
>custom flanges to match rear manis
>50mm wastegate
>4X12X32in intercooler
>2in and 3in intercooler piping
>gm maf translator
>twin greddy rs bov
>custom oil feed and return lines
>heat wrap, barrier, sleeving, turbo blanket
>battery relocation

i allready installed
>precision 550s
>safc 2
>ported lower plumun
>full 3in exhaust with 2 1/2 dual outlets
>t-case brace

i took me and a few other guys about three weeks to complete the kit so i drive the car back to my house, it sounds liike a completly different animal. the total cost was around 2grand for everything i have, the necessary piping will be cleaned up and powder and ceramic coated so IM NOT FINISHED YET
so for all everyone here i have pics from basically start to "finish"

outkastvr4 · 06-10-2008, 03:45 PM

AND THE "FINISHED" CAR

MadgwickTT · 06-10-2008, 03:51 PM

Nice, good work and congrats on the beast, I'd like to see it all dressed up, but regardless its all about the performance right?

outkastvr4 · 06-10-2008, 04:17 PM

haha im goin for looks and performance this project has really just begun

mike92stealthtt · 06-10-2008, 04:26 PM

That looks like a fun project to do and it came out very well. Just remember to put your timing belt covers back on!

Mike

jklennon@klenno · 06-10-2008, 04:37 PM

very nice.

rush6432 · 06-10-2008, 04:45 PM

i see my style setup is still being done

definatly original way to route the piping. looks good.

outkastvr4 · 06-10-2008, 05:02 PM

timing covers are goin back on but not really needed i have braces everywhere in the system so im not to worried about it. yea i looked alot on the different manifold setups and this one seemed to be the least dificult but it made the intercooler piping very challenging

binary89 · 06-10-2008, 05:06 PM

Nice work...

SneekyTT · 06-10-2008, 07:33 PM

Nice!! Definately a cool way to do things in a cost-effective manner. Keep us posted when you get her out on the road... like videos, track times, ect...

06-10-2008, 03:43 PM	#1 (permalink)
outkastvr4 Paid Member Join Date: Jun 2007 Location: portsmouth, va Drives: 92 vr-4, 87 yota Trader Rating: (7)	Single T04e Vr4 i have had many porblems with my twins so about 2 months ago i decide to go single turbo, i took a month to decide a setup and came up with >garret t04e >two rear manifolds >2in piping(for manifold) >custom flanges to match rear manis >50mm wastegate >4X12X32in intercooler >2in and 3in intercooler piping >gm maf translator >twin greddy rs bov >custom oil feed and return lines >heat wrap, barrier, sleeving, turbo blanket >battery relocation i allready installed >precision 550s >safc 2 >ported lower plumun >full 3in exhaust with 2 1/2 dual outlets >t-case brace i took me and a few other guys about three weeks to complete the kit so i drive the car back to my house, it sounds liike a completly different animal. the total cost was around 2grand for everything i have, the necessary piping will be cleaned up and powder and ceramic coated so IM NOT FINISHED YET so for all everyone here i have pics from basically start to "finish" __________________ 1992 3000GT VR-4- CUSTOM to4e single turbo kit, full 3in exhaust with 2 1/2 outlets, ported intake,550s,safc2,GM MAFT,4in FMIC, and much more to be bought 1987 Toyota turbo pickup-SOLD 1995 Nissan 240sx-bone stock project car

06-10-2008, 03:45 PM	#2 (permalink)
outkastvr4 Paid Member Join Date: Jun 2007 Location: portsmouth, va Drives: 92 vr-4, 87 yota Trader Rating: (7)	Re: Single T04e Vr4 AND THE "FINISHED" CAR

06-10-2008, 03:51 PM	#3 (permalink)
MadgwickTT Paid Member Join Date: Nov 2007 Location: Michigan Drives: 94 Stealth TT Trader Rating: (3)	Re: Single T04e Vr4 Nice, good work and congrats on the beast, I'd like to see it all dressed up, but regardless its all about the performance right? __________________ 1994 Stealth RT/TT Black/Yellow Two-Tone UD Pully, Blitz DSBC Spec-R, Stillen DP, K&N filter, Hotwired 255LPH Fuel Pump.

06-10-2008, 04:17 PM	#4 (permalink)
outkastvr4 Paid Member Join Date: Jun 2007 Location: portsmouth, va Drives: 92 vr-4, 87 yota Trader Rating: (7)	Re: Single T04e Vr4 haha im goin for looks and performance this project has really just begun

06-10-2008, 04:26 PM	#5 (permalink)
mike92stealthtt Pearl White 92 Stealth TT Join Date: Feb 2006 Location: Philly Suburbs/ PSU Drives: 100+ IDC's Trader Rating: (11)	Re: Single T04e Vr4 That looks like a fun project to do and it came out very well. Just remember to put your timing belt covers back on! Mike __________________ If you got a 96 stealth wing you want to sell please PM me.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

06-10-2008, 04:37 PM	#6 (permalink)
jklennon@klenno Paid Member Join Date: Jun 2007 Location: hendersonville Drives: 1992 VR4 Trader Rating: (4)	Re: Single T04e Vr4 very nice. __________________

06-10-2008, 04:45 PM	#7 (permalink)
rush6432 Spins all 4 Join Date: Apr 2002 Location: Austin, TX Trader Rating: (15)	Re: Single T04e Vr4 i see my style setup is still being done definatly original way to route the piping. looks good. Last edited by rush6432 : 06-10-2008 at 07:03 PM.

06-10-2008, 05:02 PM	#8 (permalink)
outkastvr4 Paid Member Join Date: Jun 2007 Location: portsmouth, va Drives: 92 vr-4, 87 yota Trader Rating: (7)	Re: Single T04e Vr4 timing covers are goin back on but not really needed i have braces everywhere in the system so im not to worried about it. yea i looked alot on the different manifold setups and this one seemed to be the least dificult but it made the intercooler piping very challenging

06-10-2008, 05:06 PM	#9 (permalink)
binary89 Forum Member Join Date: Nov 2006 Location: Overland Park, KS Drives: 93 FD, 95 Vr-4 Trader Rating: (0)	Re: Single T04e Vr4 Nice work... __________________ Rides 1995 White VR-4 : Blitz SBC ID III, Greddy Type RS, Stillen Intake, 3SX Downpipe, 3SX Pre-Cat Eliminators, 3SX 8000k HID Kit, MirageCorp Hybrid Datalogger 1993 Blue Rx-7 : StreetPort + 3mm Apex Seals, PFS Tunned Purple ECU, Walbro 225lph Fuel Pump, Greddy Rubix injector controller, 3" Turboback exhaust, Exedy Twin Plate Clutch, Fiske FM5's with Eagle F1's

06-10-2008, 07:33 PM	#10 (permalink)
SneekyTT Its Z06 Time now... Join Date: Jan 2005 Location: Poplar Grove, IL Drives: 1991 Stealth RT TT Trader Rating: (11)	Re: Single T04e Vr4 Nice!! Definately a cool way to do things in a cost-effective manner. Keep us posted when you get her out on the road... like videos, track times, ect... __________________ Rolls are for fat bitches... Ya dig?!? -2004 GMC Yukon XL Denali - Black on Black Leather - Fully Loaded -2001 Chevy Corvette Z06 - 12.30@114 1.75 60ft BONE STOCK -1991 Dodge Stealth RT Twin Turbo - Black on Black Leather - Project car for sale! lots of extra parts! PM me!