1st gen 3000gt lip - Page 3 - 3000GT/Stealth International Message Center

NAspirit · 05-31-2008, 02:10 PM

YES!!!!!!!!!! Finally! I think the same thing. The first gen. 3/S's need more aerodynamic options. I love the styling of the Kaze front lip and something similar would be awesome. I can see why some people would think that idea is stupid because of the active aero that these cars already have, but what about everyone else that doesnt have a VR4? It would be totally rad if it would actually decrease aerodynamic drag or increase airflow over the radiator. Basically be functional, but if it wouldn't be I wouldn't complain as long as it looks good and fits the lines of the car. As far as designs go, [b]I think that it should smoothly extend the flair that is already built into the sides of the bumper (right below the corner lights). I think that the lip should also flair forword just a bit to give these cars an even more aggressive "face". Some kind of vent or "body line" should also be incorporated, similar to the Kaze maybe? Maybe even make it available in different materials and be lightweight. Carbon fiber anyone?

Anyway, I think this is a great idea and I totally support. But please Extreme Dimensions, dont make it to bloody expensive!

NAspirit · 05-31-2008, 02:16 PM

Could this lip (if it gets made) also maybe fit the Stealth ES bumpers too!!!!!The bumpers are very similar on the bottom where the lip would attach to.Please!!

roobzilla · 09-23-2008, 12:38 PM

i'd spring for a lip for my 1st gen

soccermania688 · 09-29-2008, 08:32 PM

any progress?

DarkMatterM4 · 09-30-2008, 08:02 AM

I love my Kaze lip. It changes the look and styling of the car drastically, but in a good way.

I wonder if Extreme Dimensions can make it a bit more "aggressive." Maybe make the lower ducts smaller and add two of them? Oh and affordable. My Kaze was crazy expensive.

soccermania688 · 09-30-2008, 10:55 AM

looks nice^^. checked ebay there like $$550. alittle expensive

Stealth2184 · 10-02-2008, 09:19 AM

Id love to see something functional as well as good looks. Like a front splitter style lip. Something that will give our NA cars down force on the front.

Extreme Dimensions · 10-02-2008, 04:29 PM

Quote:

Originally Posted by Stealth2184

Id love to see something functional as well as good looks. Like a front splitter style lip. Something that will give our NA cars down force on the front.

I wish I could help everyone out here but unless I can get a minimum of 10 people willing to put down a deposit on the lip, it will never be made. If you guys can get a gauranteed minimum of 10 people willing to place a deposit then I can bring this to my management again and see if they will give us another shot at a group buy and actually having this lip made!

michaeljl87 · 10-02-2008, 05:56 PM

What about a lip for a 1st gen Stealth TT. I've seen some converted 3k lips, but i want something that just bolts right up and i'm sure at least 10 other 1st gen Stealth TT owners would want it too as there are currently no lip options for our cars.

michaeljl87 · 10-02-2008, 06:25 PM

Something like this. I believe this is a modified Kaze lip.

05-31-2008, 02:10 PM	#21 (permalink)
NAspirit New User - Please be kind Join Date: May 2008 Trader Rating: (0)	Re: 1st gen 3000gt lip YES!!!!!!!!!! Finally! I think the same thing. The first gen. 3/S's need more aerodynamic options. I love the styling of the Kaze front lip and something similar would be awesome. I can see why some people would think that idea is stupid because of the active aero that these cars already have, but what about everyone else that doesnt have a VR4? It would be totally rad if it would actually decrease aerodynamic drag or increase airflow over the radiator. Basically be functional, but if it wouldn't be I wouldn't complain as long as it looks good and fits the lines of the car. As far as designs go, [b]I think that it should smoothly extend the flair that is already built into the sides of the bumper (right below the corner lights). I think that the lip should also flair forword just a bit to give these cars an even more aggressive "face". Some kind of vent or "body line" should also be incorporated, similar to the Kaze maybe? Maybe even make it available in different materials and be lightweight. Carbon fiber anyone? Anyway, I think this is a great idea and I totally support. But please Extreme Dimensions, dont make it to bloody expensive!

05-31-2008, 02:16 PM	#22 (permalink)
NAspirit New User - Please be kind Join Date: May 2008 Trader Rating: (0)	Re: 1st gen 3000gt lip Could this lip (if it gets made) also maybe fit the Stealth ES bumpers too!!!!!The bumpers are very similar on the bottom where the lip would attach to.Please!!

09-23-2008, 12:38 PM	#23 (permalink)
roobzilla New User - Please be kind Join Date: Jul 2008 Location: Grand Prairie, TX Drives: 92 3000GT SL Trader Rating: (0)	Re: 1st gen 3000gt lip i'd spring for a lip for my 1st gen

09-29-2008, 08:32 PM	#24 (permalink)
soccermania688 Forum Member Join Date: Sep 2007 Location: Levittown, NY Drives: 1993 Mitsu 3000GT Sl Trader Rating: (2)	Re: 1st gen 3000gt lip any progress? __________________

09-30-2008, 08:02 AM	#25 (permalink)
DarkMatterM4 1g lip guru. Join Date: Oct 2005 Location: NJ Drives: 92 Z16A and 97 D31A Trader Rating: (3)	Re: 1st gen 3000gt lip I love my Kaze lip. It changes the look and styling of the car drastically, but in a good way. I wonder if Extreme Dimensions can make it a bit more "aggressive." Maybe make the lower ducts smaller and add two of them? Oh and affordable. My Kaze was crazy expensive. __________________ .the ecstasy lasts as long as the gasoline. The VR-4 Video

Sponsored Links
3000GT/Stealth International Message Center Advertisement

09-30-2008, 10:55 AM	#26 (permalink)
soccermania688 Forum Member Join Date: Sep 2007 Location: Levittown, NY Drives: 1993 Mitsu 3000GT Sl Trader Rating: (2)	Re: 1st gen 3000gt lip looks nice^^. checked ebay there like $$550. alittle expensive

10-02-2008, 09:19 AM	#27 (permalink)
Stealth2184 Forum Member Join Date: May 2008 Location: Spring Hill, Fl Drives: 92 ES Trader Rating: (0)	Re: 1st gen 3000gt lip Id love to see something functional as well as good looks. Like a front splitter style lip. Something that will give our NA cars down force on the front.

10-02-2008, 05:56 PM	#29 (permalink)
michaeljl87 Forum Member Join Date: Jul 2007 Location: LSU Drives: Dodge Stealth R/T TT Trader Rating: (1)	Re: 1st gen 3000gt lip What about a lip for a 1st gen Stealth TT. I've seen some converted 3k lips, but i want something that just bolts right up and i'm sure at least 10 other 1st gen Stealth TT owners would want it too as there are currently no lip options for our cars. __________________ MBC 14psi, Apexi SAFCII, Apexi N1 single shot, Stillen downpipe, pre cat eliminators, ebay y-pipe(FTMFW), 5zigen FN01R-c's, Firestone 245/17/40 Tires, 550cc injectors, safcii, Denso pump, and 13ts on the way!

10-02-2008, 06:25 PM	#30 (permalink)
michaeljl87 Forum Member Join Date: Jul 2007 Location: LSU Drives: Dodge Stealth R/T TT Trader Rating: (1)	Re: 1st gen 3000gt lip Something like this. I believe this is a modified Kaze lip.