![]() |
![]() |
|
|
#1 (permalink) |
|
Verified Seller
|
Hello,
I am currently in the market for an alky kit for my vr4. If you were setting up a kit in YOUR car how would you set it up?? Im looking for a straight from the box complete set up with all controllers, pumps, and monitors Thanks Matt |
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
USMC
|
ahh, the question I have been meaning to ask myself.
T
__________________
Trung [1993 Pearl Black VR-4]
Appearance//1999 Front end//ground controls w/ adj. rear control arms//18x9 5Zigen 5ZR wrapped in 245 front, 275/35/ZR18 Falkens//DR Racing Black lugnuts Mods//GReddy EBC Spec-II//Greedy Type-S BOV//Unorthodox UD pulley//ATR Downpipe//IPS Single Shot Magnaflow//255 Walbro pump//GReddy Profec Spec II EBC//JET tuned ECU//AutoMeter Boost gauge//HKS Turbo Timer//Gutted Hi-Flow DynoMaxx CC//Vac Reduction//EGR Block off//PRO-M 80mm MAS and MAF-T Tuner//EVO 8 560cc injectors //Shriver's datalogger Turbos: 13Tx2 Current Problem(s): Cherries in the rear view mirror In the Process: Nothing Want to Trade/Buy: Cams and springs, non-OEM clutch and flywheel... |
|
|
|
|
|
#3 (permalink) |
|
Forum Member
|
Hello Matt,
My car (VR-4) has a VC-25D controller on it. Actually it is still my first prototype of the VC-25D I did in 2004. Still running well. I would suggest the following for a good set up ISG-10 $250 VC-25D $101.95 IFS-10 $139 Total $490.95 Other options BBK-10 to be used with IFS-10 if you are using MBC. Flow Gauge IFG-20 or IFG-30, works with IFS-10 to show fluid flow rate in realtime. Maybe a Fluid Level Switch. Others have used stock washer fluid tank. Can still wash windows with 50/50 fluid. My car has a 99 coolant overflow tank from 3SX. It is to small for me, we have a 1 gallon tank that can intall in trunk. No room under hood that I have found yet for it. Let me know if this helps or you have other questions. Best regards Dan
__________________
Labonte MotorSports
Performance Water-Meth Injection Systems since 2002 1-815-315-4823 www.labontemotorsports.com sales@labontemotorsports.com |
|
|
|
|
|
#6 (permalink) |
|
Forum Member
|
Pics of the 1 gallon tank?
__________________
His - Red 93 RT/tt
Mods: Hallman's MBC @ 16 psi, turbo XS type H BOV, stillen dp, custom exhaust, Spec stage 2 clutch, RPS FW, 3sx lightweight crank pulley, BCP7RES-11 @ .030 gap, autometer gauges, slightly gutted mas, dsm SMIC's, ACPT 1 piece CFDS, Tein S springs, pte 580 inj's, safc neo/SITC, 13t's, hotwired walbro, maximal performance solid motor mounts, DR plenum spacer. Hers - BPU Green 94 vr4 |
|
|
|
|
|
#9 (permalink) |
|
Forum Member
|
The 99 overflow is what I have installed in my 94 VR-4 for meth injection.
It is a nice fit, but does not hold much fluid if you road coarse race, less then 2qt. 3Sx sells them if needed. BTW, I was able to install it without removing the front bumper. Added an option on the website to delet the fluid tank for a credit on your order if you have your own tank. Best regads, Dan |
|
|
|
|
|
#10 (permalink) |
|
Forum user
|
How long does a 1 gallon tank last
__________________
![]() Built and Tuned By RUSH6432,IPS motorsports and myself. Currently 384whp@wategate 6.8psi Weight=2890lbs Tials are in Dyno pull on the way pushing for 10-13 on pump and 15-18 on meth or race fuel....hell maybe even run both and go for 19-22 ![]() |
|
|
|