ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" - Page 2 - 3000GT/Stealth International Message Center

i3igpete · 10-04-2007, 05:27 PM

Quote:

Originally Posted by jacob666

does this one put the TB out further then the stock one? cuz it appears so. If so, would there need to be any modification to the intake hose for it to fit properly?

don't know how it can be more obvious... you can't have access to the plugs with where the throttle body is now, so he moved it. hence the whole point of the new plenum.

also wondering about using a Q45 TB. was hoping for steel, but i guess if aluminum's all we've got might as well upgrade that as well.

supermac · 10-05-2007, 02:10 AM

ill take some pics of different angles as soon as i can.

i can make them for an oversized TB if i know the size to make the hole and also the width from bolt to bolt.

yes the Tb is out a bit further than stock. but only a little bit. it shouldnt hurt a factory intake setup at all.

slage · 10-05-2007, 03:09 PM

can we see more pictures of it installed

supermac · 10-05-2007, 03:22 PM

here ya go. sorry the pics suck. had to use my phone.

also sorryt he metal is so dingy looking. the aluminum hadnt been cleaned and wire brushed yet. ordered product will be much nicer.

pearlwhitwin · 10-05-2007, 03:29 PM

Quote:

Originally Posted by i3igpete

Q45 TB

i think you should make a thread about this... i wonder how the throttle cable would work with this throttle body. and also about the tps wiring... i wonder if their tps sensor works on a 0-5v range like ours... ok i am not trying to jack this thread so this will be my one and only post. but you should make a seperate thread about this bigpete

supermac · 10-06-2007, 10:41 PM

here guys, I finally got a decent camera and took a good pic of the plenum.

tonygold · 10-11-2007, 01:57 PM

These look great! im in for 2 once i see some results.

Murcielago · 10-15-2007, 08:47 PM

Has anyone buy one?? would it fit if I have your strut bar??

supermac · 10-15-2007, 09:23 PM

yes but we are still waiting to hear back. and yes it should fit under our strut bar. it did when we tested it.

leonel · 10-15-2007, 10:02 PM

Quote:

Originally Posted by supermac

yes but we are still waiting to hear back. and yes it should fit under our strut bar. it did when we tested it.

Hey what up Chris,
I was just wondering when Im going to get the plenum, Its been a while now and I need it to finish my engine I dropped in...

Thanks

10-05-2007, 02:10 AM	#12 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" ill take some pics of different angles as soon as i can. i can make them for an oversized TB if i know the size to make the hole and also the width from bolt to bolt. yes the Tb is out a bit further than stock. but only a little bit. it shouldnt hurt a factory intake setup at all. __________________ Chris Terry 2003 Silver Evo 8 SUPERMAC -- Myspace ULTIMATE Performance -- MYSPACE

10-05-2007, 03:09 PM	#13 (permalink)
slage Norcal3S.com Join Date: Mar 2005 Location: east bay CALI Drives: 92 VR4 // 96 Jeep ZJ Trader Rating: (60)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" can we see more pictures of it installed __________________ 13T's + Supporting Mods\|DSM SMIC's\|K-Sport Coilovers\|Battery in Trunk Alchy Injection\|Saner Sway Bars\|Bronze 17x9 FN01R-C's\|3" Straight Pipe 1996 Grand Cherokee: My DD, 4" Lift and 31" Tires 1992 VR-4: My Weekend Warrior

10-05-2007, 03:22 PM	#14 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" here ya go. sorry the pics suck. had to use my phone. also sorryt he metal is so dingy looking. the aluminum hadnt been cleaned and wire brushed yet. ordered product will be much nicer.

10-06-2007, 10:41 PM	#16 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" here guys, I finally got a decent camera and took a good pic of the plenum.

10-11-2007, 01:57 PM	#17 (permalink)
tonygold Verified Seller Join Date: May 2001 Location: -TEXAS- Trader Rating: (34)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" These look great! im in for 2 once i see some results.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

10-15-2007, 08:47 PM	#18 (permalink)
Murcielago Forum Member Join Date: Mar 2007 Location: SoCal Drives: 95 SLow Trader Rating: (0)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" Has anyone buy one?? would it fit if I have your strut bar??

10-15-2007, 09:23 PM	#19 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: ULTIMATE Performance "PLUG ACCESS INTAKE PLENUM" yes but we are still waiting to hear back. and yes it should fit under our strut bar. it did when we tested it.