new products inquiry - Page 8 - 3000GT/Stealth International Message Center

calibornn1979 · 03-02-2008, 03:47 AM

Exhaust opening cover for us using single exaust. Kaze made them but quit due to lack of a market for them, but i think the morket would come back.

2MCHBOOST · 03-04-2008, 07:56 PM

Td05 adapter plate kits

TTstealthracing · 03-04-2008, 08:06 PM

Quote:

Originally Posted by supermac

Good ideas. keep em coming.

how about a cheap metal piece that blocks off the intake manifold when being removed so you can work on a car not worry about dropping nuts or bolts down the lower intake.

linchpinjoe · 03-04-2008, 08:19 PM

Quote:

Originally Posted by TTstealthracing

how about a cheap metal piece that blocks off the intake manifold when being removed so you can work on a car not worry about dropping nuts or bolts down the lower intake.

Microfiber towels are just fine :P

TTstealthracing · 03-04-2008, 08:41 PM

Quote:

Originally Posted by linchpinjoe

Microfiber towels are just fine :P

no shit Im saying for the noobs duh

Syri · 03-05-2008, 12:58 AM

Poly Bushings PLEASE.

TiberiusTribun · 03-12-2008, 06:23 AM

In for affordable poly bushings.

plus I like all kinds of aluminum dash inserts to replace the plastic parts. I don't like the stick-on stuff you can buy. Real anodized aluminum looks the business!
How about floor console side panels made from black anodized diamond plate? I hate the stockers with the rug on them.

TTstealthracing · 03-12-2008, 10:46 AM

How about the front motor mount bracket for the adapter plates

STEALTH-91 · 03-24-2008, 12:16 PM

Hey Chris. I'm ditching my underhood mat and making templates to cover the underside in mirror stainless. Before I get to deep into this project is this something that you already do? I have seen them on mustangs and on vettes and really like the appearance with the rolled edges. I didnt see anything like this on your site, but if you already do this then I'll throw some more business your way. I have a 4x8 sheet of 2B No.4 polished one side, 28ga that I think would really look good under there. If you have tackled this in the past do you have any advice for me if you dont offer this service?

Let me know
Trevor

linchpinjoe · 03-24-2008, 01:32 PM

Quote:

Originally Posted by STEALTH-91

Hey Chris. I'm ditching my underhood mat and making templates to cover the underside in mirror stainless. Before I get to deep into this project is this something that you already do? I have seen them on mustangs and on vettes and really like the appearance with the rolled edges. I didnt see anything like this on your site, but if you already do this then I'll throw some more business your way. I have a 4x8 sheet of 2B No.4 polished one side, 28ga that I think would really look good under there. If you have tackled this in the past do you have any advice for me if you dont offer this service?

Let me know
Trevor

I'd be interested in something like that as well.

03-02-2008, 03:47 AM	#71 (permalink)
calibornn1979 Forum Member Join Date: Sep 2005 Location: Fort Bragg, N.C. Drives: Carro Rapido Rojo Trader Rating: (14)	Re: new products inquiry Exhaust opening cover for us using single exaust. Kaze made them but quit due to lack of a market for them, but i think the morket would come back. __________________ Rob Beck 13T WRX turbos, DSM Sidemounts, DEJON Y-Pipe, DEJON Turbo intake pipes, KN Filters, Synapse Syncronic BOV, MSD Wires, Maximal Solid motor mounts, AEM EMS, AEM Duel UEGO, AEM Boost Solinoid, AEM AIT, AEM MAP Sensor, Stillen Down Pipe, Pit Road M 3.5 inch Titanium Catback, Seattle Roller Bearing Short Throw Shifter, Tein S-Tech, 3SX Rear camber arms, 3SX Stage 2 Clutch, 3SX light crank pully, Nelson Transfercase Bracket, RC 680cc Injectors, Walbro fuel Pump, Fidanza Flywheel

03-04-2008, 07:56 PM	#72 (permalink)
2MCHBOOST Forum Member Join Date: Feb 2007 Trader Rating: (-2)	Re: new products inquiry Td05 adapter plate kits

03-05-2008, 12:58 AM	#76 (permalink)
Syri Almost roadworthy Join Date: Sep 2006 Location: Kansas Drives: 91 Stealth R/T TT Trader Rating: (1)	Re: new products inquiry Poly Bushings PLEASE.

03-12-2008, 06:23 AM	#77 (permalink)
TiberiusTribun crash & rebuild Join Date: Sep 2005 Location: Mainz, Germany Drives: 1992 eurospec 3000GT Trader Rating: (1)	Re: new products inquiry In for affordable poly bushings. plus I like all kinds of aluminum dash inserts to replace the plastic parts. I don't like the stick-on stuff you can buy. Real anodized aluminum looks the business! How about floor console side panels made from black anodized diamond plate? I hate the stockers with the rug on them.

03-12-2008, 10:46 AM	#78 (permalink)
TTstealthracing 3/S tech Join Date: Mar 2002 Location: severn,md Drives: cops crazy Trader Rating: (18)	Re: new products inquiry How about the front motor mount bracket for the adapter plates

Sponsored Links
3000GT/Stealth International Message Center Advertisement

03-24-2008, 12:16 PM	#79 (permalink)
STEALTH-91 Forum Member Join Date: Dec 2004 Drives: 1991 Stealth RT/TT Trader Rating: (0)	Re: new products inquiry Hey Chris. I'm ditching my underhood mat and making templates to cover the underside in mirror stainless. Before I get to deep into this project is this something that you already do? I have seen them on mustangs and on vettes and really like the appearance with the rolled edges. I didnt see anything like this on your site, but if you already do this then I'll throw some more business your way. I have a 4x8 sheet of 2B No.4 polished one side, 28ga that I think would really look good under there. If you have tackled this in the past do you have any advice for me if you dont offer this service? Let me know Trevor