new products inquiry - Page 9 - 3000GT/Stealth International Message Center

supermac · 03-25-2008, 12:37 AM

polished bits under the hood would be nice, but i would have to make up a different kit for all the different factory hoods. and that would get costly. you would probably be looking at something like $300 for a kit easy.

linchpinjoe · 03-25-2008, 01:58 AM

Quote:

Originally Posted by supermac

polished bits under the hood would be nice, but i would have to make up a different kit for all the different factory hoods. and that would get costly. you would probably be looking at something like $300 for a kit easy.

fine with me, as long as they are secure.

STEALTH-91 · 03-25-2008, 05:13 AM

My personal thoughts: A small investment for such a big look. I plan on doing the centre section in one piece, the front recessed sections seperately, and the rear strut sections with just a wide ring. I'll leave the dividing bars whole between all the pieces giving it a framed appearance. The rear strut sections could also use a anodized aluminum mesh, contoured to the underside of the blister caps to help close it in a bit. I don't know what the other hoods look like only my first gen.

I was just looking to throw it out there for you Chris. If you did this then I would be paying you already. I'll do my own, but it's still something to chew on for future development for you.

I love your work, ( I own lots of it) keep it up.
Trevor

supermac · 03-27-2008, 01:00 AM

yea its def something i would like to get in on. just have to figure out what hood variations i can do and how hard it would be to make kits. and thanks for the kind words... your engine bay looks amazingly nice.

turbosprentice · 03-27-2008, 01:34 AM

what about a lip? anyone brought this up yet? i've only been skimming here and there. a new design etc...

calibornn1979 · 03-27-2008, 06:47 AM

yes supermac, 1st gen lip and exhaust cutout cover for single exhaust.

03-25-2008, 12:37 AM	#81 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: new products inquiry polished bits under the hood would be nice, but i would have to make up a different kit for all the different factory hoods. and that would get costly. you would probably be looking at something like $300 for a kit easy. __________________ Chris Terry 2003 Silver Evo 8 SUPERMAC -- Myspace ULTIMATE Performance -- MYSPACE

03-25-2008, 05:13 AM	#83 (permalink)
STEALTH-91 Forum Member Join Date: Dec 2004 Drives: 1991 Stealth RT/TT Trader Rating: (0)	Re: new products inquiry My personal thoughts: A small investment for such a big look. I plan on doing the centre section in one piece, the front recessed sections seperately, and the rear strut sections with just a wide ring. I'll leave the dividing bars whole between all the pieces giving it a framed appearance. The rear strut sections could also use a anodized aluminum mesh, contoured to the underside of the blister caps to help close it in a bit. I don't know what the other hoods look like only my first gen. I was just looking to throw it out there for you Chris. If you did this then I would be paying you already. I'll do my own, but it's still something to chew on for future development for you. I love your work, ( I own lots of it) keep it up. Trevor

03-27-2008, 01:00 AM	#84 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: new products inquiry yea its def something i would like to get in on. just have to figure out what hood variations i can do and how hard it would be to make kits. and thanks for the kind words... your engine bay looks amazingly nice.

03-27-2008, 01:34 AM	#85 (permalink)
turbosprentice i can make your vtech cry Join Date: Jun 2007 Location: sheboygan, wisconsin Drives: '96 3000gt(base) Trader Rating: (3)	Re: new products inquiry what about a lip? anyone brought this up yet? i've only been skimming here and there. a new design etc... __________________ 3s parts fs http://www.3si.org/forum/f4/91-rt-96...1/#post4943074

03-27-2008, 06:47 AM	#86 (permalink)
calibornn1979 Forum Member Join Date: Sep 2005 Location: Fort Bragg, N.C. Drives: Carro Rapido Rojo Trader Rating: (14)	Re: new products inquiry yes supermac, 1st gen lip and exhaust cutout cover for single exhaust. __________________ Rob Beck 13T WRX turbos, DSM Sidemounts, DEJON Y-Pipe, DEJON Turbo intake pipes, KN Filters, Synapse Syncronic BOV, MSD Wires, Maximal Solid motor mounts, AEM EMS, AEM Duel UEGO, AEM Boost Solinoid, AEM AIT, AEM MAP Sensor, Stillen Down Pipe, Pit Road M 3.5 inch Titanium Catback, Seattle Roller Bearing Short Throw Shifter, Tein S-Tech, 3SX Rear camber arms, 3SX Stage 2 Clutch, 3SX light crank pully, Nelson Transfercase Bracket, RC 680cc Injectors, Walbro fuel Pump, Fidanza Flywheel

Sponsored Links
3000GT/Stealth International Message Center Advertisement