Manifold To Access Rear Plugs - Page 5 - 3000GT/Stealth International Message Center

leonel · 08-02-2007, 02:07 PM

Any updates Chris...

supermac · 08-10-2007, 09:44 PM

Plenum design number 1 is heading to the welder to get sealed up on monday morning.

also just to let people know. this entire thing is made from aluminum and only weighs about 2 lbs. its super lightweight.

heres a taste.

So... you think you can reach the rear bank of spark plugs with this or what.

supermac · 08-10-2007, 09:48 PM

Also for those that want it. just let me know and i can put the throttle body on the drivers side. however... it will require custom piping, and re wireing the throttle body.

Devilmightcry · 08-10-2007, 11:14 PM

damn really nice.i like it alot.i was hopping you make diffetent bigger pipes for it and you did it really nice.

supermac · 08-10-2007, 11:21 PM

thanks.

I will probably start taking orders next week. We will get a few of them made up over the next few weeks. but please keep in mind these are going to take us at least 2 weeks per manifold to make. so dont get in a hurry to get one at your door. they are also very spendy to make and weld up so we will be doing made to order plenums for a while.

right now we are looking at a price tag of $500 shipped inside the states.

as for dyno testing heres the deal...

we will offer a $50 rebate to anyone that buys a manifold and dyno tests it. however you must supply pics, vids and dyno charts from the event. we will not be sending out any money until we get something in return.

GTO Assassin · 08-10-2007, 11:39 PM

Awesome work guys.

Scotty

pachieh · 08-11-2007, 12:58 AM

Very nice. I am interested to see how strut bars will fit with this plenum. Did you guys test fit any?

supermac · 08-11-2007, 01:00 AM

yes we did actually. the bars we currently offer dont fit at all. but we are trying some adjustments to make them fit. and also we will be redesigning a new strut bar soon so we will most likely work around this and make one that fits.

3000vr4tt · 08-11-2007, 02:25 AM

sorry to change the subject but since you guys will be redesigning a new strut bar for this manifold..will you also design it to help the guys with PPE intercooler pipes..i was really looking forward to getting your strut bar but heard it wouldnt fit..it would be nice if you could design one to help us out

pachieh · 08-11-2007, 03:17 AM

So you tested with your bars? Did you test the TEC bar?

Is this going to come polished as well?

08-02-2007, 02:07 PM	#41 (permalink)
leonel Forum Member Join Date: Aug 2003 Location: JERSEY Drives: Fast Trader Rating: (15)	Re: Manifold To Access Rear Plugs Any updates Chris... __________________ Regards, Leonel

08-10-2007, 09:44 PM	#42 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: Manifold To Access Rear Plugs Plenum design number 1 is heading to the welder to get sealed up on monday morning. also just to let people know. this entire thing is made from aluminum and only weighs about 2 lbs. its super lightweight. heres a taste. So... you think you can reach the rear bank of spark plugs with this or what. __________________ Chris Terry 2003 Silver Evo 8 SUPERMAC -- Myspace ULTIMATE Performance -- MYSPACE

08-10-2007, 09:48 PM	#43 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: Manifold To Access Rear Plugs Also for those that want it. just let me know and i can put the throttle body on the drivers side. however... it will require custom piping, and re wireing the throttle body.

08-10-2007, 11:14 PM	#44 (permalink)
Devilmightcry The dark shall be with us Join Date: Aug 2004 Location: MO Drives: 93' VR4 Trader Rating: (12)	Re: Manifold To Access Rear Plugs damn really nice.i like it alot.i was hopping you make diffetent bigger pipes for it and you did it really nice. __________________ Last edited by Devilmightcry : 08-10-2007 at 11:19 PM.

08-10-2007, 11:21 PM	#45 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: Manifold To Access Rear Plugs thanks. I will probably start taking orders next week. We will get a few of them made up over the next few weeks. but please keep in mind these are going to take us at least 2 weeks per manifold to make. so dont get in a hurry to get one at your door. they are also very spendy to make and weld up so we will be doing made to order plenums for a while. right now we are looking at a price tag of $500 shipped inside the states. as for dyno testing heres the deal... we will offer a $50 rebate to anyone that buys a manifold and dyno tests it. however you must supply pics, vids and dyno charts from the event. we will not be sending out any money until we get something in return.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

08-10-2007, 11:39 PM	#46 (permalink)
GTO Assassin Does NOT bang roo's ! Join Date: Jan 2005 Location: Sydney Australia Drives: 1993 Mitsubishi GTO Trader Rating: (32)	Re: Manifold To Access Rear Plugs Awesome work guys. Scotty

08-11-2007, 12:58 AM	#47 (permalink)
pachieh Uber-Nerd Join Date: Feb 2003 Location: Olympia, WA Drives: VR4, M3 Trader Rating: (6)	Re: Manifold To Access Rear Plugs Very nice. I am interested to see how strut bars will fit with this plenum. Did you guys test fit any? __________________ 1996 Black/Green Pearl VR4... Recently upgraded... Poster child for the Intake Pressure Test

08-11-2007, 01:00 AM	#48 (permalink)
supermac Supermactastic Join Date: Sep 2001 Location: Vancouver, WA Drives: 94 RT/TT & 03 Evo 8 Trader Rating: (33)	Re: Manifold To Access Rear Plugs yes we did actually. the bars we currently offer dont fit at all. but we are trying some adjustments to make them fit. and also we will be redesigning a new strut bar soon so we will most likely work around this and make one that fits.

08-11-2007, 02:25 AM	#49 (permalink)
3000vr4tt Forum Member Join Date: Jun 2004 Location: yonkers, ny Drives: 3kgt vr4 Trader Rating: (2)	Re: Manifold To Access Rear Plugs sorry to change the subject but since you guys will be redesigning a new strut bar for this manifold..will you also design it to help the guys with PPE intercooler pipes..i was really looking forward to getting your strut bar but heard it wouldnt fit..it would be nice if you could design one to help us out

08-11-2007, 03:17 AM	#50 (permalink)
pachieh Uber-Nerd Join Date: Feb 2003 Location: Olympia, WA Drives: VR4, M3 Trader Rating: (6)	Re: Manifold To Access Rear Plugs So you tested with your bars? Did you test the TEC bar? Is this going to come polished as well? Last edited by pachieh : 08-11-2007 at 03:28 AM.