9006 bulbs with Regular HID Plug? - 3000GT/Stealth International Message Center

ES 3000TT · 05-22-2008, 09:21 PM

Hey do you make any 9006 Bulbs with the Regular HID Plug? or can you source an adapter for them? I have Lexus Igniter's and would like to use them on my vehicle but need 9006 bulbs instead of modding the housings to use the regular d2r bulb.

thanks i appreciate it.

ES 3000TT · 05-24-2008, 11:33 PM

Anything guys?

ganesht · 05-25-2008, 01:50 AM

I would recommend that you replace your halogen projectors with a set of hid projectors, their cutoff is setup properly for hid lighting, so you wont be blinding other drivers. you can pick up a set of 04 or 05 acura tsx projector housings for about 170 shipped, and they are of similar dimensions to our projectors, so the mod isn't that hard to do.

ganesht · 05-25-2008, 02:00 AM

oooooo.. i forgot, your running 1gen pop ups, i tried using one of those plug and play hid kits, which have the modified base, but trust me its so not worth it, first of all the light goes everywhere!!! the right night i had them i got pulled over by a cop because i was blinding everyone.

i have a 1g 3kgt which i replaced the pop ups with the 2nd gen lexan lights, and did the tsx mod on them, it did cost a lot but it was worth every single penny...

cost break down:
lexan lights: 400
paint, and sanding/buffing supplies : 25
tsx projectors: 162
hid kit w/d2s bulbs: 300 from mod exp
welding, bondo, and repainting the hood: 10

the hardest part of all this is getting our hoods to conform to the new headlights, but i think that my car looks much much better, and it no longer has an out dated look.. at the same time i got rid of the 'humps' on both sides of the hood and molded an smoother fiberglass overlay, not as sleek as the stock 2g hoods, but eons better than the 1g.

ES 3000TT · 05-25-2008, 01:20 PM

Actually the 99 headlights are made similar to higher end projector units like the TSX units. Also the 99s don't have a slit for low beam like the lexan/glass units previously did.

anyways mod express any luck input info thanks. bump

ganesht · 05-25-2008, 02:00 PM

the fastest way to get your answer would be to give them a call, (626) 715-9289. if i remember correctly their open 10 to 5.

05-22-2008, 09:21 PM	#1 (permalink)
ES 3000TT 9B's Try me in 3rd!!! Join Date: Jan 2004 Location: Orlando Drives: ES 3000TT Trader Rating: (25)	9006 bulbs with Regular HID Plug? Hey do you make any 9006 Bulbs with the Regular HID Plug? or can you source an adapter for them? I have Lexus Igniter's and would like to use them on my vehicle but need 9006 bulbs instead of modding the housings to use the regular d2r bulb. thanks i appreciate it. __________________ ES 3000TT Soon something else!! 2 of 2 in the US!

05-24-2008, 11:33 PM	#2 (permalink)
ES 3000TT 9B's Try me in 3rd!!! Join Date: Jan 2004 Location: Orlando Drives: ES 3000TT Trader Rating: (25)	Re: 9006 bulbs with Regular HID Plug? Anything guys?

05-25-2008, 01:50 AM	#3 (permalink)
ganesht Paid Member Join Date: May 2008 Location: San Diego, CA Drives: 3000gt vr4 Trader Rating: (4)	Re: 9006 bulbs with Regular HID Plug? I would recommend that you replace your halogen projectors with a set of hid projectors, their cutoff is setup properly for hid lighting, so you wont be blinding other drivers. you can pick up a set of 04 or 05 acura tsx projector housings for about 170 shipped, and they are of similar dimensions to our projectors, so the mod isn't that hard to do.

05-25-2008, 02:00 AM	#4 (permalink)
ganesht Paid Member Join Date: May 2008 Location: San Diego, CA Drives: 3000gt vr4 Trader Rating: (4)	Re: 9006 bulbs with Regular HID Plug? oooooo.. i forgot, your running 1gen pop ups, i tried using one of those plug and play hid kits, which have the modified base, but trust me its so not worth it, first of all the light goes everywhere!!! the right night i had them i got pulled over by a cop because i was blinding everyone. i have a 1g 3kgt which i replaced the pop ups with the 2nd gen lexan lights, and did the tsx mod on them, it did cost a lot but it was worth every single penny... cost break down: lexan lights: 400 paint, and sanding/buffing supplies : 25 tsx projectors: 162 hid kit w/d2s bulbs: 300 from mod exp welding, bondo, and repainting the hood: 10 the hardest part of all this is getting our hoods to conform to the new headlights, but i think that my car looks much much better, and it no longer has an out dated look.. at the same time i got rid of the 'humps' on both sides of the hood and molded an smoother fiberglass overlay, not as sleek as the stock 2g hoods, but eons better than the 1g.

05-25-2008, 01:20 PM	#5 (permalink)
ES 3000TT 9B's Try me in 3rd!!! Join Date: Jan 2004 Location: Orlando Drives: ES 3000TT Trader Rating: (25)	Re: 9006 bulbs with Regular HID Plug? Actually the 99 headlights are made similar to higher end projector units like the TSX units. Also the 99s don't have a slit for low beam like the lexan/glass units previously did. anyways mod express any luck input info thanks. bump

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-25-2008, 02:00 PM	#6 (permalink)
ganesht Paid Member Join Date: May 2008 Location: San Diego, CA Drives: 3000gt vr4 Trader Rating: (4)	Re: 9006 bulbs with Regular HID Plug? the fastest way to get your answer would be to give them a call, (626) 715-9289. if i remember correctly their open 10 to 5.