Ordered Front Splitter - Page 2 - 3000GT/Stealth International Message Center

Racer_X · 01-24-2008, 12:42 PM

it appears so. I haven't put it under the car to varify which holes they are, but it looks like it bolts up to the front cross member. I will have to drill my own bumper holes since I have the 99 bumper, but that isn't a problem at all.

i3igpete · 01-24-2008, 12:45 PM

did phil add any notes on where to attach the tension rods to? i assume the crash bar, but could be wrong.

Racer_X · 01-24-2008, 01:18 PM

no. all I got was the splitter and the basic universal APR install hardware (and a sticker)

Drweldin · 02-26-2008, 03:39 PM

you guys need to post up pics / thoughts after you get them installed!
I am a little worried about curbs / driveways...

Racer_X · 02-27-2008, 07:15 AM

here is a picture of mine installed on my bumper. everything is pretty dirty, and my car currently is not mobile (no engine) so I don't know how much this pic will help.

pyun · 02-27-2008, 07:39 AM

Nice tires!

i3igpete · 02-27-2008, 08:04 AM

Quote:

Originally Posted by pyun

Nice tires!

Racer_X · 02-28-2008, 12:57 PM

A032Rs don't last very long hehe

EvanH · 03-31-2008, 03:12 PM

you think this would work with the new venom bumper since they say it has stock mounting points?

Boostaddict · 04-03-2008, 04:47 AM

It depends which "stock" mounting points it has. If its like "typical" aftermarket parts it won't have the bolt holes required but it would be simple enough to install since you have the bumper off anyway...

01-24-2008, 12:42 PM	#11 (permalink)
Racer_X just some guy. Join Date: Feb 2000 Location: Stockbridge, Georgia Drives: 94 Stealth Turbo Trader Rating: (9)	Re: Ordered Front Splitter it appears so. I haven't put it under the car to varify which holes they are, but it looks like it bolts up to the front cross member. I will have to drill my own bumper holes since I have the 99 bumper, but that isn't a problem at all. __________________ Pretty good for 2 shot turbos and a boost leak

01-24-2008, 12:45 PM	#12 (permalink)
i3igpete ''the professor'' Join Date: Feb 2005 Location: Chicago, IL Drives: GoPigGo v2.0 Trader Rating: (75)	Re: Ordered Front Splitter did phil add any notes on where to attach the tension rods to? i assume the crash bar, but could be wrong. __________________ Maddog Performance Engineering we are not mitsubishi trained technicians nor certified getrag rebuilders

01-24-2008, 01:18 PM	#13 (permalink)
Racer_X just some guy. Join Date: Feb 2000 Location: Stockbridge, Georgia Drives: 94 Stealth Turbo Trader Rating: (9)	Re: Ordered Front Splitter no. all I got was the splitter and the basic universal APR install hardware (and a sticker)

02-26-2008, 03:39 PM	#14 (permalink)
Drweldin Verified Seller Join Date: Jun 2003 Location: Iowa Trader Rating: (100)	Re: Ordered Front Splitter you guys need to post up pics / thoughts after you get them installed! I am a little worried about curbs / driveways... __________________ 1992 Stealth RT/TT:

02-27-2008, 07:15 AM	#15 (permalink)
Racer_X just some guy. Join Date: Feb 2000 Location: Stockbridge, Georgia Drives: 94 Stealth Turbo Trader Rating: (9)	Re: Ordered Front Splitter here is a picture of mine installed on my bumper. everything is pretty dirty, and my car currently is not mobile (no engine) so I don't know how much this pic will help.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

02-27-2008, 07:39 AM	#16 (permalink)
pyun "The Fisherman" Join Date: Dec 2002 Location: Bergen County/Philly Drives: around scaring birds Trader Rating: (75)	Re: Ordered Front Splitter Nice tires! __________________

02-28-2008, 12:57 PM	#18 (permalink)
Racer_X just some guy. Join Date: Feb 2000 Location: Stockbridge, Georgia Drives: 94 Stealth Turbo Trader Rating: (9)	Re: Ordered Front Splitter A032Rs don't last very long hehe

03-31-2008, 03:12 PM	#19 (permalink)
EvanH 91 RT/TT Join Date: Aug 2003 Location: IN IRAQ! err PA Drives: 91 RT/TT Trader Rating: (0)	Re: Ordered Front Splitter you think this would work with the new venom bumper since they say it has stock mounting points? Last edited by Boostaddict : 04-03-2008 at 04:47 AM.

04-03-2008, 04:47 AM	#20 (permalink)
Boostaddict Super Member Join Date: May 2002 Location: Around Detroit, MI Drives: First e16g 3/S Trader Rating: (39)	Re: Ordered Front Splitter It depends which "stock" mounting points it has. If its like "typical" aftermarket parts it won't have the bolt holes required but it would be simple enough to install since you have the bumper off anyway... __________________ Quaife Front LSD for AWD Ksport Suspension Kits Specializing in 3/S Suspension, Billet Transmission Shift Forks, 300M Output Shafts, Front AWD and FWD LSD, Transmission Rebuild Parts, STOPTECH Brake Kits, Big Reds, and Custom Brake Upgrades! More Products to Come. 1993 3000GT-VR4: AEM EMS, etc 663 awhp, 607 tq (retired tdo5-e16g's) 10.835@132.69 -26psi