Powdercoating - Page 2 - 3000GT/Stealth International Message Center

Maximal · 08-02-2007, 03:27 PM

Quote:

Originally Posted by inperfectdarkness

how much to coat a set of 4 rims in anodized starlight black (and or dark gunmetal)? (99 base 3kgt rims).

-thadd.

Won't be able to do them until I get the new oven (should be end of the month). I'll let you know when it comes in.

Terry

inperfectdarkness · 08-02-2007, 06:47 PM

sweet. i'm getting volks for my project 99 base...and the rims off of it will be perfect on my 95 base dd.

let me know. hope it's not too many $$$.

Maximal · 08-03-2007, 05:31 PM

It shouldn't be much at all, or it'll at least be cheaper than other places.

Terry

Disrupter · 08-06-2007, 09:53 AM

Do you have any pictures of parts done in those different types of Black?

Maximal · 08-06-2007, 10:51 AM

There's some here: http://www.maximalperformance.com/po...ating/gallery/

Terry

Disrupter · 08-06-2007, 11:55 AM

Sweet.... Ill be down for some glossy black, would you be able to do the lettering in a red close to caracas red?

Maximal · 08-06-2007, 01:22 PM

Doing multiple colors are pretty much impossible for powdercoat. I usually sand the tops of the letters as you can see in the pics.

Terry

pyun · 08-10-2007, 02:59 PM

Hey Terry

I received the pulleys in the mail today and they look great. However, the powdercoating on the back of one of the pulleys seems to have bubbled a bit before completely setting in and the coating can easily be chipped off and removed with my finger. Can this be re-done?

Maximal · 08-13-2007, 07:01 AM

There's a gap between the two pulley pieces there actually. What happens is the powder starts to flow out and seals that. As the air inside gets hot it expands and pushes the powder out. I could tape it off around there but the only problem with that is it's going to rust around there unless I spray paint it or something along those lines. Just let me know what you want to do.

Terry

VinylOrbit · 08-13-2007, 07:08 AM

I'm also interested in getting my 18x9 RPM 505's powdercoated chrome. Let me know how much after you get your new oven and what-not. Will I have to have the paint stripped/sand blasted (whatever) myself? Or would you do that?

08-02-2007, 06:47 PM	#12 (permalink)
inperfectdarkness bane of unintelligence Join Date: Jul 2003 Location: Warner Robins Drives: dreaming of a TT ecu Trader Rating: (12)	Re: Powdercoating sweet. i'm getting volks for my project 99 base...and the rims off of it will be perfect on my 95 base dd. let me know. hope it's not too many $$$.

08-03-2007, 05:31 PM	#13 (permalink)
Maximal Supporting Vendor Join Date: Jan 2002 Location: Painted Post, NY Drives: '91 Stealth "ES" Trader Rating: (182)	Re: Powdercoating It shouldn't be much at all, or it'll at least be cheaper than other places. Terry

08-06-2007, 09:53 AM	#14 (permalink)
Disrupter Crimson Jihad Join Date: Oct 2005 Location: Queens, NY Drives: An Angry Demon! Trader Rating: (12)	Re: Powdercoating Do you have any pictures of parts done in those different types of Black? __________________ CAUTION: Over Boosting May Cause Accidental Orgasm. 1993 Mitsubishi 3000gt VR-4 1994 Mitsubishi 3000gt SL mtx..... I miss her! Dyno: 243awhp/280awt On stock boost(~8psi) mods: K&N/Greddy type-RS (Badly Heatsoaked + Boost Leak). Mods: K&N filter, HKS SSQV, Redline motor oil 10w40, IPS 3" DP, Custom single shot, SSR GT7's, Tein S-tech,MSD 8.5 Super conductor wires, NGK \|X Iridium spark plugs. Waiting install: Blitz DSBC, , Greddy fatt, Apexi Safc2, Apexi S-itc, Maximal mounts, FMIC, RobBecks 13t's, Maf-t, z06 maf, evo9 560cc, Denso supra pump. Contemplating: Small ones

08-06-2007, 10:51 AM	#15 (permalink)
Maximal Supporting Vendor Join Date: Jan 2002 Location: Painted Post, NY Drives: '91 Stealth "ES" Trader Rating: (182)	Re: Powdercoating There's some here: http://www.maximalperformance.com/po...ating/gallery/ Terry

08-06-2007, 11:55 AM	#16 (permalink)
Disrupter Crimson Jihad Join Date: Oct 2005 Location: Queens, NY Drives: An Angry Demon! Trader Rating: (12)	Re: Powdercoating Sweet.... Ill be down for some glossy black, would you be able to do the lettering in a red close to caracas red?

Sponsored Links
3000GT/Stealth International Message Center Advertisement

08-06-2007, 01:22 PM	#17 (permalink)
Maximal Supporting Vendor Join Date: Jan 2002 Location: Painted Post, NY Drives: '91 Stealth "ES" Trader Rating: (182)	Re: Powdercoating Doing multiple colors are pretty much impossible for powdercoat. I usually sand the tops of the letters as you can see in the pics. Terry

08-10-2007, 02:59 PM	#18 (permalink)
pyun "The Fisherman" Join Date: Dec 2002 Location: Bergen County/Philly Drives: around scaring birds Trader Rating: (75)	Re: Powdercoating Hey Terry I received the pulleys in the mail today and they look great. However, the powdercoating on the back of one of the pulleys seems to have bubbled a bit before completely setting in and the coating can easily be chipped off and removed with my finger. Can this be re-done? __________________

08-13-2007, 07:01 AM	#19 (permalink)
Maximal Supporting Vendor Join Date: Jan 2002 Location: Painted Post, NY Drives: '91 Stealth "ES" Trader Rating: (182)	Re: Powdercoating There's a gap between the two pulley pieces there actually. What happens is the powder starts to flow out and seals that. As the air inside gets hot it expands and pushes the powder out. I could tape it off around there but the only problem with that is it's going to rust around there unless I spray paint it or something along those lines. Just let me know what you want to do. Terry

08-13-2007, 07:08 AM	#20 (permalink)
VinylOrbit Just Cruisin' Join Date: Aug 2003 Location: Warrenton Drives: 2 your mom's 4 BJ's Trader Rating: (10)	Re: Powdercoating I'm also interested in getting my 18x9 RPM 505's powdercoated chrome. Let me know how much after you get your new oven and what-not. Will I have to have the paint stripped/sand blasted (whatever) myself? Or would you do that? __________________ 95 3KGT/07 350ZR