info on 16T turbos?

[Black_Sunshine]

hey, can i get some info on the 16T turbos?

1. what size is the turbine exducer/inducer? do you reuse the 9b turbines?

2. what kind of lead time is there for a set?

thanks,
Tri

[SnakeSkinner]

Originally Posted by Black_Sunshine

hey, can i get some info on the 16T turbos?

1. what size is the turbine exducer/inducer? do you reuse the 9b turbines?

2. what kind of lead time is there for a set?

thanks,
Tri

1.57"/ 1.86" and it's clipped

thy are in stock, ready to ship.

[97mits3kgtSOHC]

i ordered a set from matt along with some dr stage 2 heads...i got them within a week....shipping was real fast

cant wait to drop the longblock into the car to see what it does

[Black_Sunshine]

Originally Posted by SnakeSkinner

1.57"/ 1.86" and it's clipped

thy are in stock, ready to ship.

Thanks Matt. is there any advantage of going from 15g's to these? i know the 16T has a larger compressor wheel, but reading stealth316, the two turbos flow within 7cfm of each other and that's with a 16T with a 1.62/1.86 turbine.

[SnakeSkinner]

The 16T's flow a bit more then 15G's do and thy spool faster, the wheel it's self is lighter then the 15G wheel.

If you already have 15G's, the 16T's would be a up-grade but not a huge one.

If you want somthing that will be a big step up from 15G's I would recomend you go with 19T's.

[dentheman]

Originally Posted by SnakeSkinner

The 16T's flow a bit more then 15G's do and thy spool faster, the wheel it's self is lighter then the 15G wheel.

If you already have 15G's, the 16T's would be a up-grade but not a huge one.

If you want somthing that will be a big step up from 15G's I would recomend you go with 19T's.

19T's are on my wishlist

[Black_Sunshine]

thanks again Matt. i currently have 15g's, but not installed. i actually have a buyer for them, so i may pick up a set of the 16T's. do you offer a porting service on the turbine housings? i'm not trying to build the biggest baddes td04 3s . i'm looking for a good reliable setup with some good umph!

[SnakeSkinner]

Originally Posted by Black_Sunshine

thanks again Matt. i currently have 15g's, but not installed. i actually have a buyer for them, so i may pick up a set of the 16T's. do you offer a porting service on the turbine housings? i'm not trying to build the biggest baddes td04 3s . i'm looking for a good reliable setup with some good umph!

Yes $75 to port each turbine housing

[7eddiedoowop7]

Anyone have times for these (16t's)? Just wondering what to expect with supporting mods, arc-2 maf and a half decent tune on stock block/heads with bpu

[2xmks]

16T's, do it Tri!