MVP cams progress thread - 3000GT/Stealth International Message Center

chops · 06-12-2007, 08:55 AM

This is where I will be posting up the progress of the cams to keep you guys as up to date as possible. At this time I am still awaiting the forum member that is assisting us to send out the OEM cams so we can get the ball rolling on this. As soon as that gets done I will update this thread.

Regards,
Robert

spfan · 06-12-2007, 09:39 AM

interesting. was there a thread about these cams that i missed? specs, etc?

chops · 06-12-2007, 12:10 PM

Someone brought it to my attention during my introduction thread that Kris was telling people we were going to produce these when they were not even brought up. After reading over the original thread he posted we decided there was enough interest in them to get them made. For the 1st batch we are going to make some 264's, and 272's.

Regards,
Robert

SneekyTT · 06-12-2007, 06:04 PM

Quote:

Originally Posted by chops

Someone brought it to my attention during my introduction thread that Kris was telling people we were going to produce these when they were not even brought up. After reading over the original thread he posted we decided there was enough interest in them to get them made. For the 1st batch we are going to make some 264's, and 272's.

Regards,
Robert

Sweet, estimated pricing?

mrwallyvr4 · 06-12-2007, 06:55 PM

I really really really want some billet 280 made, please for me.

vertigospiral88 · 06-12-2007, 08:12 PM

My headwork patiantly awaits your billet 272's.

Thanks!!

chops · 06-13-2007, 10:20 AM

Quote:

Originally Posted by Rckstar113

Sweet, estimated pricing?

Well Kris promised that they would roughly be $1000 give or take a couple hundred bucks. So we are going to stay true to the original promise made.

Regards,
Robert

Darksurfr · 06-13-2007, 01:31 PM

1000 bucks for non regrinds and are billet! sounds good. hmm...now if only i had no problems with my car and 1000 bucks that wasnt accounted for.

chops · 06-13-2007, 02:04 PM

These are still a few months away from being brought to the market. We are going to dyno these 1st to make sure they produce some power.

Regards,
Robert

WolfSL · 06-19-2007, 03:55 PM

If you're still waiting for the cams mine are off the car and will be for a while longer, so I wouldn't have any issues sending you guys mine. But I'm definitely in for some 272's once you guys have them made.

* I did a quick search on my computer and came up with an old spreadsheet that is supposed to have the stock cam specs if you would like it. Also, I believe that kris said something about being able to order custom grind cams. Will this still be an available option or will you just carry standard spec cams?

06-12-2007, 08:55 AM	#1 (permalink)
chops Supporting Vendor Join Date: May 2007 Trader Rating: (4)	MVP cams progress thread This is where I will be posting up the progress of the cams to keep you guys as up to date as possible. At this time I am still awaiting the forum member that is assisting us to send out the OEM cams so we can get the ball rolling on this. As soon as that gets done I will update this thread. Regards, Robert __________________ www.MVPmotorsports.com 940-683-8282 x20 Robert Del Angel Master Distributor for:Volk, Blitz, Brian Crower, Koyo, Brembo, Stillen, Power Enterprise, HKS, Greddy, Blitz, RPS, Fidanza, Apex, Map ECU,Tein, Sparco....and so many more!!!

06-12-2007, 09:39 AM	#2 (permalink)
spfan rock on, yeah rock on Join Date: Jan 2004 Location: Tampa Drives: 4 x 22,000 lbs jets Trader Rating: (6)	Re: MVP cams progress thread interesting. was there a thread about these cams that i missed? specs, etc? __________________ Dyno Collection Thread 1993 Dodge Stealth ES, White, April 2002 - April 2005, SOLD 1 of 53 1993 Dodge Stealth TT, Black, Since April 2004, 1 of 5 ever made more rarity info 2003 Subaru Forester 2.5X, Blue, Sept. 2005, Daily Driver with 165 HP of Fury! At least it's AWD. 305 awhp, 325 awtq(BPU minus full catback exhaust)Mods at that time 13.02@104.67 (9bs, dp, fipk, 15.5 psi, bov, no cats, streetmax clutch, 1.77 60', decent conditions, full weight (even spare tire/jack) 13.09@105.08 (1.80 60', same conditions as above) Beyond BPU: (meaning upgraded turbos/fuel/etc) before engine rebuild Mods at that time 12.38@113.00(20 psi, 110 octane, massive knock above 6k rpms) 12.41@115.10(ditto) After Rebuild: Current Mods Dyno Tune by IPS 12.8@108 (12.5 psi dropping to ~11 @redline, 2.0 60', pump gas, my tune)

06-12-2007, 12:10 PM	#3 (permalink)
chops Supporting Vendor Join Date: May 2007 Trader Rating: (4)	Re: MVP cams progress thread Someone brought it to my attention during my introduction thread that Kris was telling people we were going to produce these when they were not even brought up. After reading over the original thread he posted we decided there was enough interest in them to get them made. For the 1st batch we are going to make some 264's, and 272's. Regards, Robert

06-12-2007, 06:55 PM	#5 (permalink)
mrwallyvr4 MrWallyvr4 Join Date: Oct 2005 Location: Pope AFB Drives: single Turbo stealth Trader Rating: (59)	Re: MVP cams progress thread I really really really want some billet 280 made, please for me. __________________ Never argue with an idiot. They drag you down to their level, then beat you with experience

06-12-2007, 08:12 PM	#6 (permalink)
vertigospiral88 Crash diet for car geeks Join Date: Nov 2004 Location: Tahlequah, OK Drives: 1993 3000GT ATX Trader Rating: (1)	Re: MVP cams progress thread My headwork patiantly awaits your billet 272's. Thanks!! __________________ Tom

Sponsored Links
3000GT/Stealth International Message Center Advertisement

06-13-2007, 01:31 PM	#8 (permalink)
Darksurfr Stealth Like A Ninja Join Date: Nov 2004 Location: Old Bridge, NJ Drives: '91 Stealth TT Trader Rating: (14)	Re: MVP cams progress thread 1000 bucks for non regrinds and are billet! sounds good. hmm...now if only i had no problems with my car and 1000 bucks that wasnt accounted for. __________________ ECG '05- '08 / Attended NEG '05 - '08 / Attended

06-13-2007, 02:04 PM	#9 (permalink)
chops Supporting Vendor Join Date: May 2007 Trader Rating: (4)	Re: MVP cams progress thread These are still a few months away from being brought to the market. We are going to dyno these 1st to make sure they produce some power. Regards, Robert

06-19-2007, 03:55 PM	#10 (permalink)
WolfSL Row faster! Join Date: Mar 2005 Location: in the jungle Drives: 92 VR4 & 98 SL Trader Rating: (4)	Re: MVP cams progress thread If you're still waiting for the cams mine are off the car and will be for a while longer, so I wouldn't have any issues sending you guys mine. But I'm definitely in for some 272's once you guys have them made. * I did a quick search on my computer and came up with an old spreadsheet that is supposed to have the stock cam specs if you would like it. Also, I believe that kris said something about being able to order custom grind cams. Will this still be an available option or will you just carry standard spec cams? __________________ <-- How I plan on going fast 1992 VR-4 - It is being fixed (finally) 1998 SL - DD Last edited by WolfSL : 06-19-2007 at 04:07 PM.