3SX TD05 Kit install? - Page 7 - 3000GT/Stealth International Message Center

ozdave2 · 05-08-2008, 05:17 AM

The car was only run to 5458 rpm due to insufficient cooling on the dyno with the claim that it had more to go. What rpm should power output peak?

Import Power · 05-08-2008, 06:08 AM

maTT did 430AWHP uncorrected at 14psi
3SX TD05 kit
MAF-T/SAFC II
DSM Sidemounts w/stock IC pipes.
Stock cams

ozdave2 · 05-08-2008, 06:23 AM

At what rpm was max power?

Import Power · 05-08-2008, 07:55 AM

Wastegate pressure-14psi
maTT's car
3SX TD05 kit
660 inj
MafT
SAFC II
DSM SMICS w/stock pipes
PST 1 pc CF driveshaft
stock cams slight pocket port on heads stock valves
Walbro pump
3" exhaust

Import Power · 05-08-2008, 07:58 AM

don't mind the date on the bottom left, that is when I turned the runfile into a JPG

ozdave2 · 05-08-2008, 01:43 PM

Thanks for that.

I only have 550 injectors; would that be the major shortfall.

Regards

3000GT@UAE · 05-15-2008, 09:57 PM

No it shouldn t be the injectors, becuase you are only at 1 bar. They should be ok till around 24psi with TD05 kit on pump gas + meth (correct me if I'm wrong) and you are only at 14psi. You should check for vacuum leaks cause that sounds pretty low

Quote:

Originally Posted by ozdave2

Thanks for that.

I only have 550 injectors; would that be the major shortfall.

Regards

ozdave2 · 05-16-2008, 06:55 AM

Running on 98 RON; no meth.

starquest 2875 · 06-02-2008, 02:13 PM

Quote:

Originally Posted by streamlnauto

you shouldn't need to pull the motor, you can get the manifolds off with the engine in the car, check them with a straightedge to see if they are straight, its fairly inexpensive to have a machinist mill the flanges.

Your right, I didn't have to pull the motor out to fix the leaks. I was just fustrated.
the leaks that I have or had ( it's in work right know) was the rear wastegate gasket and the turbo to manifold gasket. I got metal gasket on know.
I should be up and running by thursday.
overall this kit is not bad at all. I didn't have any major issues.

streamlnauto · 06-12-2008, 11:32 PM

Tell you whats a real PITA, trying to get to the bottom bolt on the rear wastegate with the kit and engine in the car, I fought with that thing for a good 3 hours lol!!!.

05-08-2008, 05:17 AM	#61 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? The car was only run to 5458 rpm due to insufficient cooling on the dyno with the claim that it had more to go. What rpm should power output peak? __________________

05-08-2008, 06:08 AM	#62 (permalink)
Import Power Play that Funky Music Join Date: Jan 2002 Location: Behind the Wheel Drives: Vicki Insane Trader Rating: (209)	Re: 3SX TD05 Kit install? maTT did 430AWHP uncorrected at 14psi 3SX TD05 kit MAF-T/SAFC II DSM Sidemounts w/stock IC pipes. Stock cams __________________ AEM Factory Trained Tuner SLTT-10.9 @ 140MPH Stock NA motor and NA heads/Cams T4 AWD 9.21 @ 154.98 T2 FWD 10.19 @ 140.31 T4-159.23 MPH Ran on 6G72 3.1L! T4-995AWHP Uncorrected 6G72 3.0L C16 T2-820FWHP 3.1L 27psi C16 91VR4 Red-17Gs w/supporting mods-sold 93SLTT/T2 91VR4 Pearl White-sold 91VR4 Black-sold 92VR4 Sandstone-sold 94VR4 Green-sold 93VR4 Pearl White-sold 91VR4 Black-5027s-3.0L-Stock heads and Cams- 625AWHP 557AWTQ uncorrected 24psi 102 octane Daily Driver 3SX Performance 3SX Performance Service Email

05-08-2008, 06:23 AM	#63 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? At what rpm was max power?

05-08-2008, 07:55 AM	#64 (permalink)
Import Power Play that Funky Music Join Date: Jan 2002 Location: Behind the Wheel Drives: Vicki Insane Trader Rating: (209)	Re: 3SX TD05 Kit install? Wastegate pressure-14psi maTT's car 3SX TD05 kit 660 inj MafT SAFC II DSM SMICS w/stock pipes PST 1 pc CF driveshaft stock cams slight pocket port on heads stock valves Walbro pump 3" exhaust

05-08-2008, 07:58 AM	#65 (permalink)
Import Power Play that Funky Music Join Date: Jan 2002 Location: Behind the Wheel Drives: Vicki Insane Trader Rating: (209)	Re: 3SX TD05 Kit install? don't mind the date on the bottom left, that is when I turned the runfile into a JPG

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-08-2008, 01:43 PM	#66 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? Thanks for that. I only have 550 injectors; would that be the major shortfall. Regards

05-16-2008, 06:55 AM	#68 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? Running on 98 RON; no meth.

06-12-2008, 11:32 PM	#70 (permalink)
streamlnauto Forum Member Join Date: May 2007 Trader Rating: (1)	Re: 3SX TD05 Kit install? Tell you whats a real PITA, trying to get to the bottom bolt on the rear wastegate with the kit and engine in the car, I fought with that thing for a good 3 hours lol!!!.