3SX TD05 Kit install? - Page 6 - 3000GT/Stealth International Message Center

streamlnauto · 05-01-2008, 10:48 PM

more of the install posted here-

3SX TD05 Kit Install/Progress

ozdave2 · 05-05-2008, 07:33 AM

I have an exhaust leak as well when engine is cold. Was only running in at low rpm. Leaked sealed very quickly after cold start. Need to pull the engine to fix so leaving for the moment to see how it goes.

Engine was getting too warm on full dyno tune above 5500 rpm to run to full revs. Running Motec.

Fuel pump issue discovered on road run at higher rpm; this is being fixed at present.

I believe 260 kw at wheels at 5500.

3000GT@UAE · 05-06-2008, 10:16 AM

Quote:

Originally Posted by ozdave2

I have an exhaust leak as well when engine is cold. Was only running in at low rpm. Leaked sealed very quickly after cold start. Need to pull the engine to fix so leaving for the moment to see how it goes.

Engine was getting too warm on full dyno tune above 5500 rpm to run to full revs. Running Motec.

Fuel pump issue discovered on road run at higher rpm; this is being fixed at present.

I believe 260 kw at wheels at 5500.

With 3sx TD05 kit? what psi?

starquest 2875 · 05-06-2008, 10:28 AM

I too have an exhaust leak. I have to pull the motor out as well to fix it.
it sounds like shit. any body else has this problem?

streamlnauto · 05-07-2008, 01:03 AM

Quote:

Originally Posted by starquest 2875

I too have an exhaust leak. I have to pull the motor out as well to fix it.
it sounds like shit. any body else has this problem?

you shouldn't need to pull the motor, you can get the manifolds off with the engine in the car, check them with a straightedge to see if they are straight, its fairly inexpensive to have a machinist mill the flanges.

ozdave2 · 05-07-2008, 07:23 AM

Yes with the 3SX TD05 kit. Running with 550 injectors, HKS intercoolers, borla exhaust, fidanza flywheel, SPEC stage 3 plus clutch, 3SX custon underdrive pulley.

ozdave2 · 05-07-2008, 07:03 PM

Got dyno sheet. Numbers were 283awkw at 5458. Set at 1 bar.

Import Power · 05-07-2008, 07:28 PM

Quote:

Originally Posted by ozdave2

Got dyno sheet. Numbers were 283awkw at 5458. Set at 1 bar.

what is that in HP?

streamlnauto · 05-07-2008, 08:25 PM

283 kilowatts = 379 awhp

Still sounds low, should be in the mid 400's at least.

Import Power · 05-08-2008, 04:39 AM

Quote:

Originally Posted by streamlnauto

283 kilowatts = 379 awhp

Still sounds low, should be in the mid 400's at least.

yeah, that sounds low. I think most of the 3SX TD05 setups we dyno are in the 400s at that psi

05-01-2008, 10:48 PM	#51 (permalink)
streamlnauto Forum Member Join Date: May 2007 Drives: 1993 VR-4 Trader Rating: (1)	Re: 3SX TD05 Kit install? more of the install posted here- 3SX TD05 Kit Install/Progress

05-05-2008, 07:33 AM	#52 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? I have an exhaust leak as well when engine is cold. Was only running in at low rpm. Leaked sealed very quickly after cold start. Need to pull the engine to fix so leaving for the moment to see how it goes. Engine was getting too warm on full dyno tune above 5500 rpm to run to full revs. Running Motec. Fuel pump issue discovered on road run at higher rpm; this is being fixed at present. I believe 260 kw at wheels at 5500. __________________

05-06-2008, 10:28 AM	#54 (permalink)
starquest 2875 Forum Member Join Date: Apr 2004 Location: orlando Drives: VR-4 Trader Rating: (2)	Re: 3SX TD05 Kit install? I too have an exhaust leak. I have to pull the motor out as well to fix it. it sounds like shit. any body else has this problem?

05-07-2008, 07:23 AM	#56 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? Yes with the 3SX TD05 kit. Running with 550 injectors, HKS intercoolers, borla exhaust, fidanza flywheel, SPEC stage 3 plus clutch, 3SX custon underdrive pulley.

05-07-2008, 07:03 PM	#57 (permalink)
ozdave2 Forum Member Join Date: Nov 2007 Location: GEELONG VICTORIA AUS Drives: 92 STEALTH TT Trader Rating: (1)	Re: 3SX TD05 Kit install? Got dyno sheet. Numbers were 283awkw at 5458. Set at 1 bar.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-07-2008, 08:25 PM	#59 (permalink)
streamlnauto Forum Member Join Date: May 2007 Drives: 1993 VR-4 Trader Rating: (1)	Re: 3SX TD05 Kit install? 283 kilowatts = 379 awhp Still sounds low, should be in the mid 400's at least.