Interior Upgrade - 3000GT/Stealth International Message Center

fk86 · 05-25-2008, 04:10 PM

Hey guys,
I am trying to make the interior on my 97 vr4 look nice (nice enough to put in a show). I was looking at 3sx carbon fiber trim set. Anyone have that or any other quality appearance changes? Guages..cluster...trim...etc..Not too worried about a tight budget. Any advice/suggestions/links/installed pics would be nice.
Thanks

seta8967 · 05-25-2008, 04:15 PM

NYC Dashes - Quality Dash Kits, Dash Trims, Wood Dash Kits, Wood Dash Trims, Free Samples, Free Shipping - 1991-1999

includes almost everything you need for interior CF and a few exterior

fk86 · 05-25-2008, 10:39 PM

Quote:

Originally Posted by seta8967

NYC Dashes - Quality Dash Kits, Dash Trims, Wood Dash Kits, Wood Dash Trims, Free Samples, Free Shipping - 1991-1999

includes almost everything you need for interior CF and a few exterior

I don't know if it's me...but your link does not work...

fk86 · 05-25-2008, 10:40 PM

Quote:

Originally Posted by seta8967

NYC Dashes - Quality Dash Kits, Dash Trims, Wood Dash Kits, Wood Dash Trims, Free Samples, Free Shipping - 1991-1999

includes almost everything you need for interior CF and a few exterior

I don't know if its me...but your link does not work

JeremyTwinTurbo · 05-25-2008, 10:56 PM

I have some interior things done the only thing is the carbin fiber trim kit is just a stick on I am not sure if I like it that much been debating for a while on taking it out but havn't yet got mine off ebay. I also did alluminum deforst vents(of course mine were craked) and defi BF series gauges in center cluster,Katzkin leather seats w/custom green stitch embroded Stealth in headrest,and greedy shift knoob, also black leather ebrake boot and shift boot with green stitch. Never mind the gay steering wheel cover I am working on getting steering wheel rewarped in new leather or maybe a removalbe steering wheel not sure yet. I am not done with it yet still a little more details I need to get done.
Here are a few pics of mine interior enjoy:

Stealth_E · 05-25-2008, 10:59 PM

I say no to fake carbon fiber, so should everyone else.

I really want to say no to real carbon fiber too, assuming it sticks on the same way. Go have some interior trim pieces molded out of carbon, then it might start to be cool.

seta8967 · 05-25-2008, 11:24 PM

hmm seems that site is no longer around... according to a site the BBB closed them down... I didn't have a problem with them *shrug* don't go to nycdashes.com then but they had CF to brushed steel to wood and plastic pieces

tazman · 05-25-2008, 11:28 PM

You might want to check out leatherseats.com. Bill can make you a great deal!

Tool Man · 05-26-2008, 08:11 AM

I wouldn't use any stick ons in the car if it were me, but you have to go with what you like.

JeremyTwinTurbo · 05-26-2008, 10:38 AM

Also I wouldn't go with any of those door inserts were the original leather looks great. If you dont have one I would get a short thorw shifter on the 1st gen the lever is a little shorter which I think looks better also ruduces the throws by 30%. Also leatherseats.com or Katzkin are both great options on replacing and making you own custom look or just getting the old worn out leather replaced.

05-25-2008, 04:10 PM	#1 (permalink)
fk86 Under Construction Join Date: Feb 2008 Location: houston,tx Drives: 97 vr4 Trader Rating: (0)	Interior Upgrade Hey guys, I am trying to make the interior on my 97 vr4 look nice (nice enough to put in a show). I was looking at 3sx carbon fiber trim set. Anyone have that or any other quality appearance changes? Guages..cluster...trim...etc..Not too worried about a tight budget. Any advice/suggestions/links/installed pics would be nice. Thanks __________________ 97 vr-4 68k, fresh 60k tuneup, new tranny-clutch-flywheel, pending 99 conversion and 15g's w/ supporting mods.

05-25-2008, 04:15 PM	#2 (permalink)
seta8967 selling 95 vr4 Join Date: Mar 2008 Location: station-minot AFB :( Drives: 1995 3000gt VR-4 Trader Rating: (0)	Re: Interior Upgrade NYC Dashes - Quality Dash Kits, Dash Trims, Wood Dash Kits, Wood Dash Trims, Free Samples, Free Shipping - 1991-1999 includes almost everything you need for interior CF and a few exterior

05-25-2008, 10:56 PM	#5 (permalink)
JeremyTwinTurbo Forum Member Join Date: Jul 2006 Location: Close by Dekalb, IL Drives: 1992DodgeStealthTT Trader Rating: (4)	Re: Interior Upgrade I have some interior things done the only thing is the carbin fiber trim kit is just a stick on I am not sure if I like it that much been debating for a while on taking it out but havn't yet got mine off ebay. I also did alluminum deforst vents(of course mine were craked) and defi BF series gauges in center cluster,Katzkin leather seats w/custom green stitch embroded Stealth in headrest,and greedy shift knoob, also black leather ebrake boot and shift boot with green stitch. Never mind the gay steering wheel cover I am working on getting steering wheel rewarped in new leather or maybe a removalbe steering wheel not sure yet. I am not done with it yet still a little more details I need to get done. Here are a few pics of mine interior enjoy: __________________ Mods:3kgt Short Thorw shifter,Matrix intake,DNP Pre-cat eliminator kit,DNP downpipe,DNP 3" Test pipe,DNP cat-back exhaust w/4"tips,polished spark plug,polished upper intake plenum,Polished Wire harness cover,Carbon fiber interior dash kit,Chrome oill filler cap,R1 concepts Drilled and slotted rotors,Ceramic Brake pads,TurboXS BOV,new kelvar timing,new water pump,new oil filter housing,new motor mount,new serpentine gator back belts, katzkin leather seats,Defi BF serires guages eng temp,oil press.,boost,aluminum deforst vents,modifield DSM SMIC,DNP ic piping,big tyla ground wire kit,H4 conversion kit,vac reduction,clutch tank removed,greddy wieghted shift knob,alluminum door seals,and Setrap FMOC. Need plastic pieces under fornt bumper. FOR 1ST GEN STEALTH DO NOT WANT ACTIEVE AERO.If you have these peices pm me or email my at: jeremytwinturbo@yahoo.com Check out the rest of my stealth tt on cardomain:http://www.cardomain.com/ride/2417870[/] Last edited by JeremyTwinTurbo : 05-25-2008 at 11:00 PM.

05-25-2008, 10:59 PM	#6 (permalink)
Stealth_E My Stealth is Confused... Join Date: Feb 2007 Location: Pickerington/OSU, OH Drives: w/o a front plate OH Trader Rating: (6)	Re: Interior Upgrade I say no to fake carbon fiber, so should everyone else. I really want to say no to real carbon fiber too, assuming it sticks on the same way. Go have some interior trim pieces molded out of carbon, then it might start to be cool. __________________ Garage queen for a bit, but will return lower and sexier soon enough 93 Stealth/GT Hybrid http://www.3si.org/forum/showthread.php?t=393736

05-25-2008, 11:24 PM	#7 (permalink)
seta8967 selling 95 vr4 Join Date: Mar 2008 Location: station-minot AFB :( Drives: 1995 3000gt VR-4 Trader Rating: (0)	Re: Interior Upgrade hmm seems that site is no longer around... according to a site the BBB closed them down... I didn't have a problem with them shrug *don't go to nycdashes.com then* but they had CF to brushed steel to wood and plastic pieces

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-25-2008, 11:28 PM	#8 (permalink)
tazman Verified Seller Join Date: Sep 2006 Location: San Diego Drives: 95&98 3000GT SL Trader Rating: (22)	Re: Interior Upgrade You might want to check out leatherseats.com. Bill can make you a great deal! __________________ 3Si #1336 Hey, when you turn your car on, does it return the favor? Visit www.killerglass.com for the latest innovation in radiator hoses.

05-26-2008, 08:11 AM	#9 (permalink)
Tool Man VA 3S Join Date: Sep 2003 Location: Virginia Drives: 94 3000GT NA Trader Rating: (25)	Re: Interior Upgrade I wouldn't use any stick ons in the car if it were me, but you have to go with what you like. __________________ Under the knife for a TT conversion. Pics of my car, click me!_______ August 2006 ROTM

05-26-2008, 10:38 AM	#10 (permalink)
JeremyTwinTurbo Forum Member Join Date: Jul 2006 Location: Close by Dekalb, IL Drives: 1992DodgeStealthTT Trader Rating: (4)	Re: Interior Upgrade Also I wouldn't go with any of those door inserts were the original leather looks great. If you dont have one I would get a short thorw shifter on the 1st gen the lever is a little shorter which I think looks better also ruduces the throws by 30%. Also leatherseats.com or Katzkin are both great options on replacing and making you own custom look or just getting the old worn out leather replaced.