oil pump bolt locations - 3000GT/Stealth International Message Center

jonfish490 · 06-10-2008, 04:52 PM

This is so frustrating

I lost place of where my oil pump bolts go. Just wondering if any has proper way they go?

q2418130103p · 06-10-2008, 05:14 PM

just put the bolts thru and see where you have to put them so they all stick out the same lenth.

in the meantime, ill check the manual for you.

edit - didnt see it in the manual, or in caps

jonfish490 · 06-10-2008, 05:50 PM

Quote:

Originally Posted by q2418130103p

just put the bolts thru and see where you have to put them so they all stick out the same lenth.

in the meantime, ill check the manual for you.

edit - didnt see it in the manual, or in caps

Also how many long bolts, medium bolts, and short bolts should there be?
I bought a new set but something does not seem right. Just wanted to check with someone. I know they all have the 4 stamped in the head of them but that really does not help much.

jonfish490 · 06-11-2008, 07:43 PM

bump for help

speedy25 · 06-11-2008, 08:21 PM

Sorry buddy, but if you cant put a bolt in and see how far it sticks out to determine which goes where, maybe you shouldnt be wrenching.

Please dont take offense. The job isnt very hard.

-SP

jonfish490 · 06-11-2008, 08:59 PM

Quote:

Originally Posted by speedy25

Sorry buddy, but if you cant put a bolt in and see how far it sticks out to determine which goes where, maybe you shouldnt be wrenching.

Please dont take offense. The job isnt very hard.

-SP

Did that with my last block and unfortunately it broke off inside. That's why I don't wanna take any chances.

speedy25 · 06-13-2008, 03:26 PM

SO did the bolt break from being the wrong one, for having a defect or from over torqueing?

-SP

jonfish490 · 06-17-2008, 01:22 PM

Quote:

Originally Posted by speedy25

SO did the bolt break from being the wrong one, for having a defect or from over torqueing?

-SP

I believe it was because it was rusty inside there and it was forced in. Or that I know there is 7 bolts but 5 of them go in first then the tensioner goes in and one of them could have been forced. Mistake in my part.... But this new 4 bolt block is going great

06-10-2008, 04:52 PM	#1 (permalink)
jonfish490 Jonfish490 Join Date: Jan 2007 Location: West Chester Drives: on jack stands Trader Rating: (1)	oil pump bolt locations This is so frustrating I lost place of where my oil pump bolts go. Just wondering if any has proper way they go?

06-10-2008, 05:14 PM	#2 (permalink)
q2418130103p Forum Member Join Date: Sep 2004 Location: Johnston, RI Drives: 1993 Mits 3000gt VR4 Trader Rating: (3)	Re: oil pump bolt locations just put the bolts thru and see where you have to put them so they all stick out the same lenth. in the meantime, ill check the manual for you. edit - didnt see it in the manual, or in caps __________________ Want to Buy: Door Interior with no bubbles Last edited by q2418130103p : 06-10-2008 at 05:26 PM.

06-11-2008, 07:43 PM	#4 (permalink)
jonfish490 Jonfish490 Join Date: Jan 2007 Location: West Chester Drives: on jack stands Trader Rating: (1)	Re: oil pump bolt locations bump for help

06-11-2008, 08:21 PM	#5 (permalink)
speedy25 Cant get there from here! Join Date: Dec 2006 Location: NE oHIo Drives: Various Japanese Trader Rating: (0)	Re: oil pump bolt locations Sorry buddy, but if you cant put a bolt in and see how far it sticks out to determine which goes where, maybe you shouldnt be wrenching. Please dont take offense. The job isnt very hard. -SP __________________ One of 789

06-13-2008, 03:26 PM	#7 (permalink)
speedy25 Cant get there from here! Join Date: Dec 2006 Location: NE oHIo Drives: Various Japanese Trader Rating: (0)	Re: oil pump bolt locations SO did the bolt break from being the wrong one, for having a defect or from over torqueing? -SP

Sponsored Links
3000GT/Stealth International Message Center Advertisement