![]() |
![]() |
|
|
#2 (permalink) |
|
Forum Member
|
You don't take the boost solenoid off to do the free boost mod. You disconnect a hose and take out a rubber stopper with a hole in the middle thats in one of the solenoids holes.
__________________
1991 RT/TT Pearl White/Porn Red JSpec motor, 25spline convo, 15g's + supporting, 4" exhaust, other mods. 92 Stealth Base DD.
![]() |
|
|
|
|
|
#3 (permalink) |
|
T STU
|
http://www.stealth316.com/2-freeboost.htm
I was reading about it on here....So i take that little plug out of the bottom nipple then reconnect the hose that goes to the nipple? Is it as easy as it sounds? lol |
|
|
|
|
|
#4 (permalink) | |
|
Oh SNAP!!!
|
Quote:
__________________
If you feel I have answered your question..leave me some rep...thanks
**1ST place RMG 07 best engine** Like the snake the BITE must be felt and not seen, goin super, until then super slow want some!!! 1st car with the Enkei RZ-5 18''x8.5'' *534x306* ![]() 1994 Dodge Stealth R/T TT~Pearl Yellow |
|
|
|
|
|
|
#10 (permalink) |
|
New User - Please be kind
|
Hello, I have a 99 3000GT Too, and when I have seen into the solenoid, I have seen that my cars has the rubber stopper too!, So in 99 cars it will not have to be there no?
But the problem is that I have removed this limiter (or rubber stopper), and mounted everything like it was, butr without the rubber stopper, and when I drive the car, I discovered that the car doesnt seems to be faster. I would feel q few punch loss at 2.500 rmp, very few, and I would feel a little little more punch on higher revs, but is as small as i cant appreciate, in fact, iīm not sure that it was real. Whats the problem? 1) Does my car have the two air hoses exchanged? I think not, because the hoses are different due to a marked lower hose. And if they were exchanged, the car will runs horrible, isnīt it? 2) Are there any other things that a 99 car has to do to make effective this free bost mod? I think that i have to feel it more powerfull not? Thanks for your help. |
|
|
|