clutch help - 3000GT/Stealth International Message Center

italiano3kgt · 06-14-2008, 09:32 PM

ok so i was pulling in to my driveway and i went to put in in reverse and it grinded really bad, so i thought i just didnt put the clutch in all the way. so i tryed it again and it did the same thing. then i went to put the car in first and it was very hard to get it in. so i pulled over and tryed it again and it wouldnt go into any gear at all. then after a while of sitting and waiting for a tow truck, i wen to try it again and the clutch was all the way on the ground. i pulled it back out with my hand and then pushed it back in and it stayed to the floor... any ideas of what could be happening??

Colt45_GTO · 06-15-2008, 02:25 AM

sounds like its run out of fluid. check the reservior and fill it up

nylander · 06-15-2008, 05:12 AM

Check your clutch slave cylinder, my guess is that it sprung a leak.

italiano3kgt · 06-15-2008, 07:45 AM

nope the res if up to the max line.... any other ideas??

Colt45_GTO · 06-15-2008, 11:01 AM

so the res is maxed yet the pedal drops and don't return!

sounds like clutch fork busted or somethin check slave cylinder as stated above. maybe the seal has gone on master cylinder piston?

all i can say is investigate

VR4-GASM · 06-15-2008, 11:19 AM

You may have broken your clutch disc, or a spring could have popped out.

That happened to me twice.

italiano3kgt · 06-16-2008, 08:51 AM

well the piston moves for the clutch slave cylinder... and the bleeder valve works to.. so now what do i look at??

06-14-2008, 09:32 PM	#1 (permalink)
italiano3kgt Born In Italy Join Date: Dec 2007 Location: williamsburg va Drives: 1993 3000gt vr4 Trader Rating: (0)	clutch help ok so i was pulling in to my driveway and i went to put in in reverse and it grinded really bad, so i thought i just didnt put the clutch in all the way. so i tryed it again and it did the same thing. then i went to put the car in first and it was very hard to get it in. so i pulled over and tryed it again and it wouldnt go into any gear at all. then after a while of sitting and waiting for a tow truck, i wen to try it again and the clutch was all the way on the ground. i pulled it back out with my hand and then pushed it back in and it stayed to the floor... any ideas of what could be happening?? __________________ She love's the way i drive her!!!!

06-15-2008, 05:12 AM	#3 (permalink)
nylander Forum Member Join Date: Feb 2007 Location: Belgrade, Montana Drives: '93 R/T NA, '02 WRX Trader Rating: (0)	Re: clutch help Check your clutch slave cylinder, my guess is that it sprung a leak. __________________

06-15-2008, 07:45 AM	#4 (permalink)
italiano3kgt Born In Italy Join Date: Dec 2007 Location: williamsburg va Drives: 1993 3000gt vr4 Trader Rating: (0)	Re: clutch help nope the res if up to the max line.... any other ideas??

06-15-2008, 11:01 AM	#5 (permalink)
Colt45_GTO GTONW is good to go Join Date: Nov 2004 Location: manchester uk Drives: Black '91 TT Trader Rating: (0)	Re: clutch help so the res is maxed yet the pedal drops and don't return! sounds like clutch fork busted or somethin check slave cylinder as stated above. maybe the seal has gone on master cylinder piston? all i can say is investigate

06-15-2008, 11:19 AM	#6 (permalink)
VR4-GASM Verified Seller Join Date: Jul 2005 Location: Lehigh Valley, PA Drives: other ppl's cars Trader Rating: (10)	Re: clutch help You may have broken your clutch disc, or a spring could have popped out. That happened to me twice. __________________ 1995 3000GT Base BPU+ (10:1 @ 10psi) HKS, AEM, Stillen, 3SX, Apex-i, Greddy, Maximal Performance, K&N, Auto Meter, ACT, Fidanza, MSD, Turbo-XS "Both cars look really nice and are fun cars. But neither is capable of winning a race, even against each other." -donniekak

Sponsored Links
3000GT/Stealth International Message Center Advertisement

06-16-2008, 08:51 AM	#7 (permalink)
italiano3kgt Born In Italy Join Date: Dec 2007 Location: williamsburg va Drives: 1993 3000gt vr4 Trader Rating: (0)	Re: clutch help well the piston moves for the clutch slave cylinder... and the bleeder valve works to.. so now what do i look at??