Extreme Dimensions urethane bumpers? - 3000GT/Stealth International Message Center

casperlynn · 05-17-2008, 12:45 PM

I am considering the Version 2 front bumper cover.

Does anyone have any hands-on experience with their Duroflex products?

I am concerned with the finish and fitment?

Thanks,
Garrie

Murcielago · 05-17-2008, 02:54 PM

One of my friends has a bomex rear bumper for his 3K from them, fitment was good not perfect but good. The finish look like the bumper had cellulite so it needs good prepwork to get it to look right.

casperlynn · 05-17-2008, 03:34 PM

Quote:

Originally Posted by Murcielago

One of my friends has a bomex rear bumper for his 3K from them, fitment was good not perfect but good. The finish look like the bumper had cellulite so it needs good prepwork to get it to look right.

That is what I was afraid of.......you get what you pay for. Thanks for the input.

casperlynn · 05-18-2008, 07:45 AM

bump....

Murcielago · 05-18-2008, 09:37 AM

Quote:

Originally Posted by Stealthee

Before I put the 99 front on I had an Extreme Dimensions kit on my car. It fit damn near perfect. Why? Because I spent more money on that kit than most people would like to know about. The only modification I had to do was cut my stock crash bar as the bumper would not fit around it.

Stealthee · 05-18-2008, 09:57 AM

Hah, I posted in the thread without knowing it.

Yes as my quote says I had an Extreme Dimensions kit at one time. There were little to no gaps upon first fitment.

casperlynn · 05-18-2008, 10:12 AM

Quote:

Originally Posted by Stealthee

Hah, I posted in the thread without knowing it.

Yes as my quote says I had an Extreme Dimensions kit at one time. There were little to no gaps upon first fitment.

Small world isn't it ha!

In this post, it sounds like you are favorable. You did mention in the prior post "I had to do was cut my stock crash bar as the bumper would not fit around it" Which bumper was it? That is definetly a question for me to ask Extreme Dimensions. I am considering the Version 2.

Stealthee · 05-18-2008, 10:24 AM

I had to make cuts on both bumpers.

It really wasnt a huge issue. I placed the bumper up where it should sit, made a mark of the bumper where it interfered and then cut it using a 4" grinder with a cut-off wheel.

Murcielago · 05-18-2008, 11:00 AM

Stealthee- It seems that fitment its good it both cases yours and my friends but how was the finish??

Stealthee · 05-18-2008, 11:51 AM

I had no problems with the finish. It was actually quite smooth.

05-17-2008, 12:45 PM	#1 (permalink)
casperlynn My car whines!! Join Date: Dec 2007 Trader Rating: (3)	Extreme Dimensions urethane bumpers? I am considering the Version 2 front bumper cover. Does anyone have any hands-on experience with their Duroflex products? I am concerned with the finish and fitment? Thanks, Garrie __________________ http://www.youtube.com/watch?v=zeboHcvsqRg Last edited by casperlynn : 05-18-2008 at 07:44 AM.

05-17-2008, 02:54 PM	#2 (permalink)
Murcielago Forum Member Join Date: Mar 2007 Location: SoCal Drives: 95 SLow Trader Rating: (0)	Re: Extreme Dimensions urethane bumpers? One of my friends has a bomex rear bumper for his 3K from them, fitment was good not perfect but good. The finish look like the bumper had cellulite so it needs good prepwork to get it to look right.

05-18-2008, 07:45 AM	#4 (permalink)
casperlynn My car whines!! Join Date: Dec 2007 Trader Rating: (3)	Re: Extreme Dimensions urethane bumpers? bump....

05-18-2008, 09:57 AM	#6 (permalink)
Stealthee Damage Control Join Date: Jul 2003 Location: 1 hr south of Pitt Drives: 1994 Stealth Trader Rating: (78)	Re: Extreme Dimensions urethane bumpers? Hah, I posted in the thread without knowing it. Yes as my quote says I had an Extreme Dimensions kit at one time. There were little to no gaps upon first fitment. __________________ Kbizzle [11:25 P.M.]: my ass is really sore Kbizzle [11:25 P.M.]: this is most displeasing

05-18-2008, 10:24 AM	#8 (permalink)
Stealthee Damage Control Join Date: Jul 2003 Location: 1 hr south of Pitt Drives: 1994 Stealth Trader Rating: (78)	Re: Extreme Dimensions urethane bumpers? I had to make cuts on both bumpers. It really wasnt a huge issue. I placed the bumper up where it should sit, made a mark of the bumper where it interfered and then cut it using a 4" grinder with a cut-off wheel.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-18-2008, 11:00 AM	#9 (permalink)
Murcielago Forum Member Join Date: Mar 2007 Location: SoCal Drives: 95 SLow Trader Rating: (0)	Re: Extreme Dimensions urethane bumpers? Stealthee- It seems that fitment its good it both cases yours and my friends but how was the finish??

05-18-2008, 11:51 AM	#10 (permalink)
Stealthee Damage Control Join Date: Jul 2003 Location: 1 hr south of Pitt Drives: 1994 Stealth Trader Rating: (78)	Re: Extreme Dimensions urethane bumpers? I had no problems with the finish. It was actually quite smooth.