99 Conversion Information Thread Cheap Prices - Page 5 - 3000GT/Stealth International Message Center

3k97gt · 11-16-2007, 03:23 PM

well i added up all the things u need for a 99conversion from www.autopartspeople.com came out to 1777 not including inserts, splash shields, rear center panel, and sail panels ... i couldnt find the inserts, rear center panel and sail panel on the site and does 97splash shield work for 99?

VR4 Playa · 11-16-2007, 04:15 PM

where do you go to find the rear center panel... I think that along w/ sail panels and side skirts are about all I need... rest i'll keep 1st gen... although I need to paint the grey trim around the rear license plate area and etc... but that'll wait until I decide who's doing the paint or if i can do it myself

3k97gt · 11-16-2007, 06:02 PM

seems like ur better of at getting the package at 3sx rather than autopartspeople.com

93pearlyvr4 · 12-23-2007, 10:15 PM

if i bought the kit from ipsmotorsports.this one
http://www.ipsmotorsports.net/produc...oducts_id/1129

what else would i need to make it complete?
also where could i get 94-99 sideskirts and rear bumper?

nduda78 · 12-24-2007, 03:22 AM

I would get 2nd Gen sideskirts from the classified section, people always selling them , or on ebay. Same deal for rear bumper. If you have AA now your going to have to loose it (dont take my word 100% though). I had to remove my AA because all the new panels for under the car didnt fit with AA still on. I have a 96VR4 and did a full 99 conversion....Here is what I did:

- 99 bumper
- 99 headlights
- 99 Turns signals
- 99 Sail panels
- Cianci spolier (same as 99 combat)
- 99 Rear Garnish

Additionals that are not 99 sepcific:

- Deft 575 hood
- Deft VLS

Before 99 Conversion:

After 99 Conversion:

99 Conversion with VLS (interior panels were not on at this point):

99 Conversion front end after FMIC:

93pearlyvr4 · 12-24-2007, 04:38 PM

AA is already removed (AA-active aero).

also mine is a 93. so what extra stuff would i have to do and or order to make this complete?

lawdogg · 01-14-2008, 05:53 PM

Bump so I can find this tomorrow.

jba3 · 01-18-2008, 08:40 PM

Quote:

Originally Posted by 93pearlyvr4

AA is already removed (AA-active aero).

also mine is a 93. so what extra stuff would i have to do and or order to make this complete?

Headlight buckets for the conversion for 91-93 to 94+, as on the 3SX tutorial page on 99 conversion, I believe.

jba3 · 02-14-2008, 10:17 AM

Does anyone have part numbers for the:

99 Sail Panels
99 Center Taillight Panel
99 Hoop Spoiler (Standard)
99 Combat Spoiler (VR4)

I have CAPS installed, but can't figure out what to do with it, I keep getting errors... And I'm a friggen software engineer.

LunarSX · 02-26-2008, 06:58 PM

Am I reading this right?

For the Headlamp Assembly (item#1), its $508.08 each.
But its $544.39 to just get the Headlamp Body (item#2)
And another $9.52 to get the screws (#3)

Why would anyone by anything other than the assembly if that covers all pieces?

Just want to make sure that Body isn't something different.

EDIT: Oops on this link:

http://www.trademotion.com/partlocat...=1&catalogid=2

11-16-2007, 03:23 PM	#41 (permalink)
3k97gt Forum Member Join Date: Jan 2007 Location: Michigan Drives: SOHC3kgt Trader Rating: (1)	Re: 99 Conversion Information Thread Cheap Prices well i added up all the things u need for a 99conversion from www.autopartspeople.com came out to 1777 not including inserts, splash shields, rear center panel, and sail panels ... i couldnt find the inserts, rear center panel and sail panel on the site and does 97splash shield work for 99?

11-16-2007, 04:15 PM	#42 (permalink)
VR4 Playa Big C Join Date: Dec 2000 Location: Chicago Burbs, IL Drives: 91 VR4 Trader Rating: (6)	Re: 99 Conversion Information Thread Cheap Prices where do you go to find the rear center panel... I think that along w/ sail panels and side skirts are about all I need... rest i'll keep 1st gen... although I need to paint the grey trim around the rear license plate area and etc... but that'll wait until I decide who's doing the paint or if i can do it myself __________________ RIP SIMON CHRUSZCZ 1986-2007(You were not only my best friend, but the little brother I never had, while you are no longer with us, your spirit lives on!) 91 VR4 sorrento red pearl- K&N Fipk, ATR dp&cat, ATR cat-back, Turbo XS BOV, NEW stock y-pipe, Apex'i S-AFC, HKS Type1 TT, DSM 450cc injectors(@111k), Walbro Pump(@111k), Blitz DSBC, 99 lifters(@113k), Full 120k maintenance plus complete gasket and seal overhaul and oil pump(@113k), used tranny&TC from eBay(@117k), x-drilled/slotted zinc coated rotors(@119k), rebuilt steering rack from AutoZone(@135k), EBC GreenStuff fronts(@135k), 3sx Spec-II clutch(@149k), Magnecor KV85's(@149k), NGK V-Powers(@149k), Sylvania SilverStars, AEM FPR(@152k), 3sx hotwire, Clarion DXZ475c, Polk 5 1/4" components, 18x9 Koenig Tantrums Coming Soon amp and rear speakers Currently: @155k... richer than Bill Gates... really wish I had an AEM ECU or an easy way to troubleshoot Goodbye: Stillen dp, "tennis ball" mod to y-pipe, RPS III, 93 Astro(aka Beater#1), 88 Accord(Beater#2), RPS II, Clarion DXZ845MC headunit(STOLEN ) 95 Yamaha YZF600R cocktail blue... TOTALLED!!!(idiot driver pulled in front of me)... wore my helmet so I am fine though! "Porsche's cars will never sacrifice handling for top speed, never pursuit acceleration over braking, never place lightness above reliability" - from an article on the 959 supercar not living by the Porsche philosophy

11-16-2007, 06:02 PM	#43 (permalink)
3k97gt Forum Member Join Date: Jan 2007 Location: Michigan Drives: SOHC3kgt Trader Rating: (1)	Re: 99 Conversion Information Thread Cheap Prices seems like ur better of at getting the package at 3sx rather than autopartspeople.com

12-23-2007, 10:15 PM	#44 (permalink)
93pearlyvr4 Forum Member Join Date: Jan 2007 Location: southern minnesota Drives: 5spd 93 vr-4 Trader Rating: (0)	Re: 99 Conversion Information Thread Cheap Prices if i bought the kit from ipsmotorsports.this one http://www.ipsmotorsports.net/produc...oducts_id/1129 what else would i need to make it complete? also where could i get 94-99 sideskirts and rear bumper? __________________

12-24-2007, 03:22 AM	#45 (permalink)
nduda78 Forum Member Join Date: Apr 2005 Location: Boston, MA Drives: 96 VR4 Trader Rating: (10)	Re: 99 Conversion Information Thread Cheap Prices I would get 2nd Gen sideskirts from the classified section, people always selling them , or on ebay. Same deal for rear bumper. If you have AA now your going to have to loose it (dont take my word 100% though). I had to remove my AA because all the new panels for under the car didnt fit with AA still on. I have a 96VR4 and did a full 99 conversion....Here is what I did: - 99 bumper - 99 headlights - 99 Turns signals - 99 Sail panels - Cianci spolier (same as 99 combat) - 99 Rear Garnish Additionals that are not 99 sepcific: - Deft 575 hood - Deft VLS Before 99 Conversion: After 99 Conversion: 99 Conversion with VLS (interior panels were not on at this point): 99 Conversion front end after FMIC: __________________ Max Hp: 401.0 @ 6105RPM / 128.4MPH (Mustang Dyno) Max Torque: 385.6 @ 4737RPM / 74.9MPH (Mustang Dyno) Best Track time: 12.211 @ 119.45 (NE Dragway) WPI:Import Best Show \| April 2008 ROTM Last edited by nduda78 : 12-24-2007 at 03:27 AM.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

12-24-2007, 04:38 PM	#46 (permalink)
93pearlyvr4 Forum Member Join Date: Jan 2007 Location: southern minnesota Drives: 5spd 93 vr-4 Trader Rating: (0)	Re: 99 Conversion Information Thread Cheap Prices AA is already removed (AA-active aero). also mine is a 93. so what extra stuff would i have to do and or order to make this complete?

01-14-2008, 05:53 PM	#47 (permalink)
lawdogg Wingless 3000GT Club Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (54)	Re: 99 Conversion Information Thread Cheap Prices Bump so I can find this tomorrow. __________________ 2002 WJ -- 1994 VR-4 -- 1993 ZJ --Canon Rebel XTi

02-14-2008, 10:17 AM	#49 (permalink)
jba3 Verified Seller Join Date: Dec 2006 Location: Charles Town WV Drives: mitsu's stock up ^_^ Trader Rating: (5)	Re: 99 Conversion Information Thread Cheap Prices Does anyone have part numbers for the: 99 Sail Panels 99 Center Taillight Panel 99 Hoop Spoiler (Standard) 99 Combat Spoiler (VR4) I have CAPS installed, but can't figure out what to do with it, I keep getting errors... And I'm a friggen software engineer.

02-26-2008, 06:58 PM	#50 (permalink)
LunarSX guitah playah Join Date: Aug 2000 Location: Island of Rhode Drives: 94 3000GT SL Trader Rating: (3)	Re: 99 Conversion Information Thread Cheap Prices Am I reading this right? For the Headlamp Assembly (item#1), its $508.08 each. But its $544.39 to just get the Headlamp Body (item#2) And another $9.52 to get the screws (#3) Why would anyone by anything other than the assembly if that covers all pieces? Just want to make sure that Body isn't something different. EDIT: Oops on this link: http://www.trademotion.com/partlocat...=1&catalogid=2 __________________ Pete ------ '94 3000GT SL (green) K&N FIPK Hoop Spoiler 3000 GTO rear panel 17" Drag DR11s 235,000+ miles Last edited by LunarSX : 02-26-2008 at 06:59 PM. Reason: Add Url