Need help finding tranny bearings please help! - 3000GT/Stealth International Message Center

TwinTurboStealth · 07-19-2008, 08:13 AM

I've finnaly gotten a good VCU and 18 spline shaft. Now heres my problem.

I wasn't 100% sure how to get the VCU out so I took off the top bearing on the intermediate shaft? and took one of the gears off so that I could get to that housing that holds the VCU.

One bearing has a part number 30207JR I have located this thrust/rolelr bearing through a local bearing distributer.

The problem is the plastic needle bearing assembly underneath that I melted when I heated up the Other race to remove it from the shaft. Not all of the needles turn now thats its melted. Does anyone have a part number? or a supplier to get just this one or both bearings?

Thanks
Mike k.

Drweldin · 07-20-2008, 07:33 AM

I would check with the vendors on here known for dealing with our trans...
Jacks, SCE, 3SX, Kormex come to mind....good luck.

sleeper3000 · 07-20-2008, 08:13 PM

Supercar Engineering

07-19-2008, 08:13 AM	#1 (permalink)
TwinTurboStealth Forum Member Join Date: Jun 2008 Trader Rating: (0)	Need help finding tranny bearings please help! I've finnaly gotten a good VCU and 18 spline shaft. Now heres my problem. I wasn't 100% sure how to get the VCU out so I took off the top bearing on the intermediate shaft? and took one of the gears off so that I could get to that housing that holds the VCU. One bearing has a part number 30207JR I have located this thrust/rolelr bearing through a local bearing distributer. The problem is the plastic needle bearing assembly underneath that I melted when I heated up the Other race to remove it from the shaft. Not all of the needles turn now thats its melted. Does anyone have a part number? or a supplier to get just this one or both bearings? Thanks Mike k.

07-20-2008, 07:33 AM	#2 (permalink)
Drweldin Verified Seller Join Date: Jun 2003 Location: Iowa Trader Rating: (107)	Re: Need help finding tranny bearings please help! I would check with the vendors on here known for dealing with our trans... Jacks, SCE, 3SX, Kormex come to mind....good luck. __________________ 1992 Stealth RT/TT:

07-20-2008, 08:13 PM	#3 (permalink)
sleeper3000 sleeper Join Date: Aug 2007 Location: elkton, maryland Drives: 1991 mits vr-4 :) Trader Rating: (0)	Re: Need help finding tranny bearings please help! Supercar Engineering

Sponsored Links
3000GT/Stealth International Message Center Advertisement