Getrag 440/446 parts. - Page 90 - 3000GT/Stealth International Message Center

lawdogg · 02-08-2007, 05:48 AM

Thank you Bret.

Bret Brinkmann · 02-08-2007, 06:22 AM

You are all very welcome. If any one can think of some thing that I left out, then just let me know and I will make changes.

lawdogg · 02-08-2007, 06:51 AM

I'm just super psyched to no longer have to call Bill at Autocraft 10000000000000000 times before getting through to him.

I spent a month last year finding both end bearings for my intermediate shaft in my 6spd. It sucked. Having your guide is truly priceless and a real benefit for the entire platform - I just hope you're getting the kind of applause you deserve from the rest of us.

And forgive me for my lack of reading comprehension, but did you list sources for OEM shift forks (or anything non-billet) and the balls/springs in the endcase?

Daetlus · 03-09-2007, 08:18 AM

Thanks for taking the time to put this page together. I just saved $300 and got a new part as opposed to a used one.

Bret Brinkmann · 03-11-2007, 04:44 PM

I know we have plenty of used but still perfectly good 5 speed forks and the detent balls/springs here at 3SX. I would be surprised if we were the only ones. I think you may be able to get the 5 speed forks assemblies as a set here in the US.

Instead of calling AutoCraft 10000000000000000 times I have been calling All Trans Parts 10000000000000000 times. I noticed that their prices just went up quite a bit. I think they finally realized what they have.

Again, thanks for the kind words guys. I just hope enough people see it and take the time to look through it all.

JackM · 03-21-2007, 12:59 PM

Quote:

Originally Posted by disturbedkorn

Well, I need a 1st gear inner synchro (and preferably all 3) for a 6 speed right away. Any ideas? Anyone willing to sell them to me? Even at a premium?
The transmission is apart. That is the only thing wrong with it. I'd hate for 18_SSX to have to buy a whole new transmission for one sychro. Thanks for your help guys.

I have a few of them. Please send me a list and I can get back to you on the price at sales@jackstransmissions.com or you can visit my site at www.jackstransmissions.com

Thanks!

Jack

Oops, I didn't notice this thread was so long, lol!

Bret Brinkmann · 03-21-2007, 05:17 PM

GalantVR4 - I sent you a PM about a reverse gear and sleeve. I can not seem to find these any where.

Theo_VR4 · 05-17-2007, 07:35 PM

Hey Brett or Kormex or anyone... I just rebuilt a 5 speed for a friend and somehow one of the endcaps on the case for the shaft covering the shift levers is missing. Anybody have a busted case that can sell me one of those caps? Thanks for any help!

Jason

Bret Brinkmann · 06-04-2007, 06:20 AM

Do you mean one of the little freeze plug looking things at the ends of the shift rails? We have several of those in stock here at 3SX. Give us a call at the shop. 704-784-DRAG.

Theo_VR4 · 06-04-2007, 08:33 AM

Thanks for the reply. Yeah that was it. I had gotten ahold of kormex already though. He said that autozone should have them too, so I told my friend and he got one.

02-08-2007, 05:48 AM	#891 (permalink)
lawdogg Here for the tuna. Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (66)	Re: Getrag 440/446 parts. Thank you Bret. __________________ 94 VR-4: 11.8 @ 116, 17psi, pump, 13Ts

02-08-2007, 06:22 AM	#892 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. You are all very welcome. If any one can think of some thing that I left out, then just let me know and I will make changes. __________________ 250 RWHP If you want the exploded views of both 5 and 6 speeds or pics e-mail me at SavagTiger@AOL.com. 94 VR-4 Panama Green Tan Interior RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.

02-08-2007, 06:51 AM	#893 (permalink)
lawdogg Here for the tuna. Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (66)	Re: Getrag 440/446 parts. I'm just super psyched to no longer have to call Bill at Autocraft 10000000000000000 times before getting through to him. I spent a month last year finding both end bearings for my intermediate shaft in my 6spd. It sucked. Having your guide is truly priceless and a real benefit for the entire platform - I just hope you're getting the kind of applause you deserve from the rest of us. And forgive me for my lack of reading comprehension, but did you list sources for OEM shift forks (or anything non-billet) and the balls/springs in the endcase?

03-11-2007, 04:44 PM	#895 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. I know we have plenty of used but still perfectly good 5 speed forks and the detent balls/springs here at 3SX. I would be surprised if we were the only ones. I think you may be able to get the 5 speed forks assemblies as a set here in the US. Instead of calling AutoCraft 10000000000000000 times I have been calling All Trans Parts 10000000000000000 times. I noticed that their prices just went up quite a bit. I think they finally realized what they have. Again, thanks for the kind words guys. I just hope enough people see it and take the time to look through it all.

03-21-2007, 05:17 PM	#897 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. GalantVR4 - I sent you a PM about a reverse gear and sleeve. I can not seem to find these any where.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

06-04-2007, 06:20 AM	#899 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. Do you mean one of the little freeze plug looking things at the ends of the shift rails? We have several of those in stock here at 3SX. Give us a call at the shop. 704-784-DRAG.

06-04-2007, 08:33 AM	#900 (permalink)
Theo_VR4 Drive it hard Join Date: Sep 2001 Location: Dayton, Ohio Trader Rating: (14)	Re: Getrag 440/446 parts. Thanks for the reply. Yeah that was it. I had gotten ahold of kormex already though. He said that autozone should have them too, so I told my friend and he got one.