Getrag 440/446 parts. - Page 71 - 3000GT/Stealth International Message Center

Bret Brinkmann · 04-21-2006, 10:43 AM

I don't know why I didn't earlier up I updated the first post of this thread to include AutoCraft's fax number and information that will help members get a hold of Bill faster. I also added that Mentor Mitsu is no longer able to supply us with Getrag parts, made it more clear that Applied is the place to get roller bearings, and a few other minor details were changed.

david1 · 04-29-2006, 06:02 PM

some one have pic on how the reverse gear is put on 5 speed awd on to
side cover remove bolt when put in in output shaft

Bret Brinkmann · 05-02-2006, 09:21 PM

I'm not sure what you are asking. Can you be a little more clear?

lawdogg · 05-02-2006, 09:48 PM

Quote:

Originally Posted by Bret Brinkmann

I don't know why I didn't earlier up I updated the first post of this thread to include AutoCraft's fax number and information that will help members get a hold of Bill faster. I also added that Mentor Mitsu is no longer able to supply us with Getrag parts, made it more clear that Applied is the place to get roller bearings, and a few other minor details were changed.

Thanks Bret, looks like I'll be needing a 1-2 shift fork and a 1-2 collar now. Autocraft the best source?

Bret Brinkmann · 05-02-2006, 10:26 PM

Yes. Call in the AM if you don't have a fax.

Gatecrasher · 05-03-2006, 09:59 AM

I've faxed, I've emailed and I've left messages. Still nothing. At least have the courtesy to tell me to go away if you can't or won't sell me parts...

Gatecrasher · 05-03-2006, 09:17 PM

I FINALLY heard back from Bill. Looks like I have enough parts coming to do 2 more trannies.

There is so much cool shit I could do with these things if I could just get parts reliably. It's so aggravating...

lawdogg · 05-03-2006, 11:33 PM

How did you hear back from him? Fax, phone, email?

Gatecrasher · 05-04-2006, 04:29 PM

He finally called be back. I've only had the same contact info for 2 years now...

Bret Brinkmann · 05-04-2006, 08:36 PM

How long were you trying to get upwith him? Thelongest it ever took for me was the next day. And that was only because I faxed him later in the afternoon. Every time I faxed him the morning I got a reply that afternoon.

04-21-2006, 10:43 AM	#701 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. I don't know why I didn't earlier up I updated the first post of this thread to include AutoCraft's fax number and information that will help members get a hold of Bill faster. I also added that Mentor Mitsu is no longer able to supply us with Getrag parts, made it more clear that Applied is the place to get roller bearings, and a few other minor details were changed. __________________ 250 RWHP If you want the exploded views of both 5 and 6 speeds or pics e-mail me at SavagTiger@AOL.com. 94 VR-4 Panama Green Tan Interior RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.

04-29-2006, 06:02 PM	#702 (permalink)
david1 3si #1390 Join Date: Jun 2003 Location: ELIZABETH NC Trader Rating: (4)	Re: Getrag 440/446 parts. some one have pic on how the reverse gear is put on 5 speed awd on to side cover remove bolt when put in in output shaft __________________ 1992 dogde stealth Evo3 turbo,660 injector, 85 mass air flow and translator 2.1 ,water/methanol injection, supar fuel pump, k@n air filter, greddy blow off valve, , ips front mount interccoler and pipes ,tires BFG KD d@n down pipe , no cats, blitz sbd-id, msd wires, cross drilled rotors.pst drive shaft ,msd, e2k TC bracket . lsd .spec 3+ clutch Dr650 1/8 7.5 at 94mph 453HP 470 Torque Evo3 1/8 7.3 at 98mph 559hp 514 Torque slipping cluch

05-02-2006, 09:21 PM	#703 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. I'm not sure what you are asking. Can you be a little more clear?

05-02-2006, 10:26 PM	#705 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. Yes. Call in the AM if you don't have a fax.

05-03-2006, 09:59 AM	#706 (permalink)
Gatecrasher The Codebringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. I've faxed, I've emailed and I've left messages. Still nothing. At least have the courtesy to tell me to go away if you can't or won't sell me parts... __________________ -= sig goes here =-

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-03-2006, 09:17 PM	#707 (permalink)
Gatecrasher The Codebringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. I FINALLY heard back from Bill. Looks like I have enough parts coming to do 2 more trannies. There is so much cool shit I could do with these things if I could just get parts reliably. It's so aggravating...

05-03-2006, 11:33 PM	#708 (permalink)
lawdogg Here for the tuna. Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (66)	Re: Getrag 440/446 parts. How did you hear back from him? Fax, phone, email?

05-04-2006, 04:29 PM	#709 (permalink)
Gatecrasher The Codebringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. He finally called be back. I've only had the same contact info for 2 years now...

05-04-2006, 08:36 PM	#710 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. How long were you trying to get upwith him? Thelongest it ever took for me was the next day. And that was only because I faxed him later in the afternoon. Every time I faxed him the morning I got a reply that afternoon.