Getrag 440/446 parts. - Page 65 - 3000GT/Stealth International Message Center

Gatecrasher · 11-04-2005, 11:14 AM

What do you need Red? I've got some options most don't....

smokinvr-4 · 11-11-2005, 04:05 PM

gatecrasher I need a syncro set

lmn

Bret Brinkmann · 11-14-2005, 09:32 AM

smokinvr-4 - Sent you an e-mail because your box was full.

Gatecrasher - Your box is full also. Anyone know who rebuilds/puts together the TCs for Mitsu? AutoCraft said it wasn't them.

mjannusch · 11-14-2005, 09:45 AM

Quote:

Originally Posted by Bret Brinkmann

Gatecrasher - Your box is full also. Anyone know who rebuilds/puts together the TCs for Mitsu? AutoCraft said it wasn't them.

If there's any lead on that, I'd be very interested. I've got two 6-speed transfercases that I've stripped the gears out of (the third dead one went back to Mitsu with the recall) that I'd like to get new internals for if there is any way to acquire them. Cost isn't an issue (within reason).

Gatecrasher · 11-14-2005, 10:41 AM

I have no idea who does them. I was going to work on them, but I'm not willing to expose myself to the liability given the lack of service specs and the known failure rate.

1stgen24 · 11-14-2005, 11:34 AM

Getting ready to change out a R syncro in a 6-speed, 130K What all should i replace while i am at it? I am doing a 5 to 6 speed swap, are the MR gears still out there? Not a big deal i have all the parts to swap

maddog · 11-14-2005, 11:40 AM

i think getrag is still in charge of them. the two i got from recalls looked brand new and had intials and car years engraved on them. they werent repainted like how CRS does it so it think its brand new cases. not sure about internals.

would mitsu mentor be able to use his contacts in japan to help us figure this out?

Bret Brinkmann · 11-14-2005, 02:41 PM

1stgen24 - A lot of times you will need the reverse gear and synchro collar to go with it. You never know for sure until you open it up though and look at the condition of the dog teeth. If you have the 6 speed just laying around, then go ahead and open it up and carefully inspect everything. You never know what you will see.

maddog - Howard no longer works at Mentor OH Mitsubishi. That dealer can still get parts through Japan though. It would be worth giving them a cal or e-mail about the TCs.

I have sent an e-mail out to Mark Williams Interprises about the possibility of TC internals and a few other things. I'll keep you guys posted.

BLACK94TT · 11-15-2005, 04:01 AM

Quote:

Originally Posted by Bret Brinkmann

1stgen24 - A lot of times you will need the reverse gear and synchro collar to go with it. You never know for sure until you open it up though and look at the condition of the dog teeth. If you have the 6 speed just laying around, then go ahead and open it up and carefully inspect everything. You never know what you will see.

maddog - Howard no longer works at Mentor OH Mitsubishi. That dealer can still get parts through Japan though. It would be worth giving them a cal or e-mail about the TCs.

I have sent an e-mail out to Mark Williams Interprises about the possibility of TC internals and a few other things. I'll keep you guys posted.

Howard no longer works at Mentor? That's a huge loss. He was a valuable resource who seemed genuinely interested in our cars. Is he still in the business?

Bret Brinkmann · 11-15-2005, 09:23 AM

That I do not know. I only confirmed that he no longer works for Mitsu. I would like to know what happened to him. I don't even think I rememberseeing him post on 3Si in a long time.

11-04-2005, 11:14 AM	#641 (permalink)
Gatecrasher The Chaosbringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. What do you need Red? I've got some options most don't.... __________________ North Bend Technologies - northbendtech.com

11-11-2005, 04:05 PM	#642 (permalink)
smokinvr-4 Too fast 4 you Join Date: Jan 2002 Location: Arizona Drives: Smokinvr4@hotmail Trader Rating: (100)	Re: Getrag 440/446 parts. gatecrasher I need a syncro set lmn __________________ Attention: This is my Email- smokinvr4@hotmail.com Product pics, click here!!!

11-14-2005, 09:32 AM	#643 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. smokinvr-4 - Sent you an e-mail because your box was full. Gatecrasher - Your box is full also. Anyone know who rebuilds/puts together the TCs for Mitsu? AutoCraft said it wasn't them. __________________ When asked what the best thing to come out of Italy is, most Italians will tell you Ferrari.... But if you ask me it was Super Mario Brothers. 250 RWHP If you want the exploded views of both 5 and 6 speeds or pics e-mail me at SavagTiger@AOL.com. 94 VR-4 Panama Green Tan Interior RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.

11-14-2005, 10:41 AM	#645 (permalink)
Gatecrasher The Chaosbringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. I have no idea who does them. I was going to work on them, but I'm not willing to expose myself to the liability given the lack of service specs and the known failure rate.

11-14-2005, 11:34 AM	#646 (permalink)
1stgen24 Forum Member Join Date: May 2005 Location: OHIO Drives: 91 Stealth TT Trader Rating: (10)	Re: Getrag 440/446 parts. Getting ready to change out a R syncro in a 6-speed, 130K What all should i replace while i am at it? I am doing a 5 to 6 speed swap, are the MR gears still out there? Not a big deal i have all the parts to swap __________________ MODS: MBC-12 psi Gutted Pre cats Test pipe K&N Fipk 6-speed swap Best Times @14 psi 13.4 @ 106 13.2 @ 102

Sponsored Links
3000GT/Stealth International Message Center Advertisement

11-14-2005, 11:40 AM	#647 (permalink)
maddog The New Super Pimp Join Date: May 2002 Location: chicago suburbs / IA Drives: FASTER THAN VIPERS Trader Rating: (7)	Re: Getrag 440/446 parts. i think getrag is still in charge of them. the two i got from recalls looked brand new and had intials and car years engraved on them. they werent repainted like how CRS does it so it think its brand new cases. not sure about internals. would mitsu mentor be able to use his contacts in japan to help us figure this out? __________________ 93 Sandstone VR4 11.66 @ 117.48mph with Maddog Performance Engineering 13T's This weeks specials: CUSTOM RUBBER INTERCOOLER PIPING AT 50% OFF!!! 28 HOUR ENGINE REBUILD ONLY $700

11-14-2005, 02:41 PM	#648 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. 1stgen24 - A lot of times you will need the reverse gear and synchro collar to go with it. You never know for sure until you open it up though and look at the condition of the dog teeth. If you have the 6 speed just laying around, then go ahead and open it up and carefully inspect everything. You never know what you will see. maddog - Howard no longer works at Mentor OH Mitsubishi. That dealer can still get parts through Japan though. It would be worth giving them a cal or e-mail about the TCs. I have sent an e-mail out to Mark Williams Interprises about the possibility of TC internals and a few other things. I'll keep you guys posted.

11-15-2005, 09:23 AM	#650 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. That I do not know. I only confirmed that he no longer works for Mitsu. I would like to know what happened to him. I don't even think I rememberseeing him post on 3Si in a long time.